Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Edgebanding 2416 Black 1mm gives you a defined black edge along panel sides, so exposed core is covered and the finished part looks consistent from face to edge. The 1mm thickness provides a substantial edge profile, which helps panels feel solid at touch points. With a 1-5/16 inch width, this edge banding covers typical panel thickness with room for trimming, so you can flush it clean to the surface after bonding. The black color keeps the visual line uniform around the cabinet or fixture, which matters where edges sit in direct view. As PVC edge banding, it is suited to typical woodworking environments where panels need a practical, work-ready edge treatment. Over a 300FT length, one roll supports multiple panels or a small run, which helps keep material changes during a job to a minimum.
The 1-5/16 inch width on this edgebanding gives you working room on either side of the panel, so the band can be centered, bonded, and then trimmed flush to the faces. Because the material is 1mm thick, it suits edge-banding methods that expect a moderate, workable thickness for cutting and flush trimming. The PVC edge banding classification places this product in common edgebanding workflows on man-made panel materials, where a consistent edge is required around cabinets, shelving, or similar components. With a total length of 300FT, one roll supports edging several full-size panels or a series of smaller parts in sequence, which is useful where repeat dimensions are run through the same setup.
This edge banding is 1-5/16 inch wide, so it is sized to cover the edge of panels while still leaving trim allowance above and below the surface. In cabinet or fixture construction, that width means the band can overhang slightly, then be cut back flush for a clean line. The 1mm thickness gives enough body for the band to present as a defined edge without overwhelming the panel, which is useful on casework where edges should read as deliberate but not bulky. Identified as PVC edge banding, this product aligns with typical use on engineered wood or similar panel materials used in woodworking projects. Across a 300FT roll length, it supports a sequence of components in one continuous run, which keeps the edge appearance consistent from piece to piece within the same job.
The black color of the Edgebanding 2416 Black 1mm helps mask minor variation at the joint line, so the edge reads as a single band around doors, tops, or shelves. That uniform color supports repeatable visual results across multiple parts drawn from the same roll. The 1mm thickness ensures the material reacts predictably during trimming operations, so once settings are dialed in for this edgebanding, they can stay consistent for the 300FT length. The defined 1-5/16 inch width gives a known coverage dimension, which helps standardize panel sizing and trimming steps when multiple workers are edging similar components. The manufacturer part number 2416-B1-2140-300 clearly identifies this exact black 1mm, 1-5/16 inch, 300FT PVC edge banding, which helps keep future reorders matched to the existing installation.
Edgebanding 2416 Black 1mm covers exposed panel edges, so substrate is concealed and cabinets, shelving, or similar components present a finished black edge line.
This Doellken Woodtape edge banding is 1-5/16 inch wide, giving coverage across the panel edge with extra material available for trimming to a flush finish.
The 2416-B1-2140-300 edgebanding is 1mm thick, so it offers a solid, defined edge that still works smoothly with trimming and finishing steps.
The edge banding roll length is 300FT, which supports edging multiple panels or a run of smaller parts from a single roll on the same setup.
This product is classified as PVC edge banding, placing it in the category commonly used with man-made panels in woodworking applications.
Black 1mm edge banding creates a defined, uniform dark edge, which helps visually tie together doors, shelves, and panels in matching casework runs.
Edgebanding 2416 Black 1mm from Doellken Woodtape brings a 1mm thick, 1-5/16 inch wide PVC edge treatment in a 300FT roll, so exposed panel edges can match a black design layout across cabinets or fixtures. The defined thickness and generous width support straightforward trimming and finishing steps once your workflow is set. For projects calling for a consistent black PVC edge banding solution, this 2416-B1-2140-300 roll offers the dimensions and length to handle multiple components in a coordinated run.