Festool Rubin 2 6 inch sanding discs use an 80 grit aluminum oxide abrasive that levels surfaces quickly while leaving a consistent scratch pattern, which supports predictable sanding results across your wood projects. The discs are developed for natural wood, wood composites and veneers, so one abrasive type can serve common cabinet and furniture materials. A special coating sheds wood fibers, helping the abrasive stay clearer as you sand and maintaining cutting efficiency. Rubin 2 features a 30% faster removal rate, which reduces time spent on each panel or component. The discs also deliver a 30% longer sheet life, so discs are changed less frequently during production runs. The Multi-Jetstream II design is engineered for efficient dust extraction, which keeps the abrasive working and supports cleaner surfaces ready for further sanding or finishing steps.
These sanding discs use a hook and loop backing, which allows quick attachment and removal from compatible sanding pads during tool changes or grit changes. The 6 inch size is designed for sanders that accept 6 inch hook and loop discs, aligning the abrasive area with common pad diameters. The Multi-Jetstream II design works with dust extraction systems that match this pattern, helping maintain airflow through the pad and disc. The 80 grit rating positions these discs for intermediate sanding steps after planing or coarse shaping, supporting smooth transitions to finer grits in your finishing schedule.
Rubin 2 80 grit sanding discs are described as perfect for all wood-finishing applications, so they fit cabinet shops, millwork operations and serious woodworking where consistent surface prep is required. The discs are developed for natural wood, which covers hardwoods like oak or maple and soft woods like pine or fir, so they can move between face frames, doors and trim without changing abrasive families. They are also developed for wood composites and veneers, so the same disc can be used on plywood, MDF-based components and veneered panels in a project. Use on hardwoods like oak or maple means the abrasive is suited for denser stock that demands steady cutting, while use on soft woods like pine or fir addresses resinous or softer material that can load lesser abrasives. Use on tropical woods like ebony or teak extends that range to oily, dense species, allowing one abrasive line to address specialty pieces. Use on wood-based products ensures that laminate cores and engineered substrates within the wood category are also covered in the same sanding setup.
Rubin 2 features a 30% faster removal rate, which means each pass removes more material and shortens sanding time on rails, stiles and wide panels. This faster cut is useful when leveling joints or breaking down mill marks before moving to finer grits. The discs also provide a 30% longer sheet life, so each disc stays in service longer and reduces the number of disc changes required on repetitive runs. That longer life supports more consistent results over a batch, because the scratch pattern stays stable for more parts. The special coating sheds wood fibers as they are cut, which helps reduce loading, keeps the abrasive open and maintains cutting speed. This is especially helpful on soft woods and resinous species where fiber buildup can slow sanding. The Multi-Jetstream II design is engineered for dust extraction, moving dust away from the sanding interface and helping the abrasive stay cooler in use. Better dust movement also supports clearer visibility of the surface, which helps detect defects or remaining mill marks before moving on. The hook and loop backing enables quick disc changes between grits or when moving between different wood species, maintaining momentum at the bench or on the line.
Rubin 2 80 grit sanding discs are developed for natural wood, wood composites and veneers, so they can be used across hardwoods, soft woods, tropical woods and wood-based products in wood-finishing work.
The 30% faster removal rate allows Rubin 2 discs to take down material more quickly, which shortens sanding passes and helps move from machining to finish-ready surfaces with fewer steps.
The 30% longer sheet life lets each Rubin 2 disc stay effective across more parts, reducing disc changes and helping maintain a consistent scratch pattern over longer production runs.
The special coating sheds wood fibers as they are cut, so the abrasive loads less, keeps cutting more freely and maintains its removal rate on hardwoods and soft woods.
The 80 grit aluminum oxide disc balances fast stock removal with controlled scratch depth, making it suitable for leveling and early finishing stages on a wide range of wood species.
The Multi-Jetstream II design is engineered for dust extraction, moving dust away from the sanding area, which supports cleaner surfaces and helps the abrasive keep cutting efficiently.
Festool Rubin 2 6 inch sanding discs in 80 grit combine an aluminum oxide abrasive with a special fiber-shedding coating, giving you an abrasive built for natural wood, wood composites and veneers. The 30% faster removal rate and 30% longer sheet life directly support efficient, repeatable sanding on hardwoods, soft woods, tropical woods and wood-based products. The Multi-Jetstream II design is engineered for dust extraction, which helps maintain cutting performance across extended sessions. For wood-finishing workflows that move between solid stock, sheet goods and veneered parts, these discs provide a consistent, wood-focused abrasive solution.
Sold In: 1 Box