Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Festool Rubin 2 6 inch sanding disc is a 120 grit aluminum oxide abrasive disc designed for wood-finishing applications, so it targets the surface preparation stage that determines how stains and finishes lay down. The disc is developed for natural wood, wood composites, and veneers, which means one abrasive line can stay on the sander as you move between solid stock, engineered panels, and face veneers in the same project. A special coating sheds wood fibers during sanding, helping the disc stay more open so it keeps cutting rather than loading, which matters when you are running long passes on resinous or fiber-rich woods. Rubin 2 delivers a 30% faster removal rate, so each pass removes material more efficiently, helping reduce time spent leveling and smoothing. It also provides a 30% longer sheet life, which helps extend change-out intervals on repetitive work and supports more consistent scratch patterns over larger surfaces.
The Rubin 2 6 inch 120 grit disc is specified for use on hardwoods like oak or maple, so it tackles dense grain and milling marks common on cabinet frames and solid tops. It is also suited to soft woods like pine or fir, which helps when moving from carcasses or molding in soft species to harder face frames without swapping abrasive lines. The disc is intended for tropical woods like ebony or teak as well, aligning with projects that combine exotics and domestic hardwoods in the same assembly. It is also developed for wood-based products, so it supports work on engineered materials and veneers where consistent scratch depth across glue lines and core transitions is important before finishing.
This Festool Rubin 2 6 inch 120 grit aluminum oxide sanding disc is specified for all wood-finishing applications, which positions it for cabinet shops and woodworking setups focused on preparing surfaces before stain, clear coat, or paint. Its development for natural wood, wood composites, and veneers means a single abrasive choice can move across face frames, door rails, veneered panels, and edge details within the same job, supporting consistent scratch patterns across mixed materials. Suitability for hardwoods like oak or maple fits common furniture and cabinet species, so the disc addresses dense grain and typical planer or jointer marks. Applicability on soft woods like pine or fir aligns with trim, carcass work, and shop fixtures where softer stock dominates. The specification for tropical woods like ebony or teak connects directly to higher-end work that brings oily or dense exotics into the build, allowing the same abrasive line to support those parts. Coverage of wood-based products and veneers helps maintain a stable cut as sanding moves across cores, glue lines, and thin face layers, which is important for avoiding uneven surface preparation before finishing.
The Rubin 2 formulation provides a 30% faster removal rate, so each pass at 120 grit removes more material, letting installers and woodworkers reduce the time needed to flatten joints, level sealer sanding between steps, or blend machine marks. That efficiency becomes especially useful on runs of cabinet doors or panels where repetitive sanding can otherwise bottleneck throughput. A 30% longer sheet life means the disc remains effective across more workpieces before changing, which supports steadier output because the cut and scratch pattern stay more consistent from part to part. The special coating that sheds wood fibers helps keep the abrasive open rather than loading, which is valuable when sanding resin-rich softwoods or open-pore hardwoods where dust and fibers can quickly plug a standard sheet. Using an aluminum oxide grain at 120 grit geared to wood-finishing applications ties the scratch profile directly to the preparation needed for finishing, which can reduce extra sanding passes and support smoother coating laydown across hardwood, softwood, tropical, and engineered wood components.
Festool Rubin 2 is designed for wood-finishing applications, so it focuses on preparing wood surfaces before finishing steps where consistent scratch patterns matter.
The Festool Rubin 2 disc is developed for natural wood, wood composites, and veneers, so it can handle solid stock, engineered panels, and veneered surfaces in wood projects.
The 120 grit rating provides a fine, controlled scratch that suits wood-finishing applications, shaping the surface to accept subsequent sanding steps and finishes consistently.
The 30% faster removal rate lets the Rubin 2 disc take down material more efficiently, which helps reduce sanding time on cabinet parts, doors, and furniture components.
The special coating on Rubin 2 sheds wood fibers during sanding, helping reduce clogging so the disc maintains a more consistent cut over longer sanding runs.
The disc is specified for hardwoods like oak or maple, soft woods like pine or fir, and tropical woods like ebony or teak, so one abrasive type can support varied wood species.
The Festool Rubin 2 6 inch 120 grit aluminum oxide sanding disc is focused on wood-finishing applications across natural wood, wood composites, and veneers, so it aligns with cabinet, furniture, and trim workflows using varied species. Its 30% faster removal rate and 30% longer sheet life support efficient surface preparation on hardwoods like oak or maple, soft woods like pine or fir, tropical woods like ebony or teak, and other wood-based products. Choosing this disc for wood-focused sanding steps helps maintain a consistent cut and scratch pattern as projects move from solid components to veneered and engineered elements.
Sold In: 1 Box