Festool Rubin 2 6 inch sanding disc is a 100 grit aluminum oxide abrasive disc designed for wood-finishing applications, so it targets the sanding stages where you refine bare wood surfaces before finishing. The Rubin 2 design delivers a 30% faster removal rate, helping you move through leveling and prep passes with fewer disc changes and less sanding time on each surface. This sanding disc also delivers a 30% longer sheet life, so each disc stays productive over more square footage of work before it needs to be replaced. A special coating sheds wood fibers during sanding, which keeps the abrasive cutting instead of loading and supports a more consistent scratch pattern across the panel or component. Developed for natural wood, wood composites, and veneers, the disc supports a range of typical shop materials in one abrasive type, which simplifies disc selection across your projects.
This Festool Rubin 2 6 inch sanding disc uses a hook and loop backing, so it mounts to compatible hook and loop sanding pads and allows quick disc changes during grit progression. The Multi-Jetstream II pattern is designed for dust movement through the disc, supporting extraction paths that help draw sanding dust away from the surface while you work. That dust movement supports clearer visibility of the work area, which helps you stop at the right point instead of oversanding edges or profiles. Using 100 grit on natural wood, wood composites, and veneers supports a balanced cut that removes milling marks while still respecting thin face layers and decorative surfaces.
This Rubin 2 100 grit disc is developed for natural wood, so it works on hardwoods like oak or maple when you are smoothing frames, doors, rails, and stiles before finishing. The same disc is specified for soft woods like pine or fir, so it can move from case parts to trim components without a change in abrasive line. Development for tropical woods like ebony or teak means it addresses dense species often used in accent details, allowing a single abrasive family to cover common shop woods. The disc is also developed for wood-based products, so you can use it on engineered panels where a consistent scratch is important for finish appearance. Its suitability for veneers means it can be used on veneered doors or panels where controlled cutting helps respect the thin face layer.
The 30% faster removal rate of Rubin 2 means each pass at 100 grit removes more material, which helps flatten joints or level transitions between components without extra sanding cycles. The 30% longer sheet life extends the interval before changing discs, so large production runs or multiple built-ins can often be processed with fewer abrasive changes. The special coating that sheds wood fibers helps keep the abrasive surface open, which maintains the intended 100 grit scratch pattern across solid wood and veneered areas. Use on hardwoods, soft woods, tropical woods, and wood-based products means the same disc specification can stay on the sander while you move between different parts of a project, supporting a steady workflow. The hook and loop backing works with compatible pads to hold the disc flat against the surface, helping the abrasive track evenly across wide panels and narrow parts.
The Festool Rubin 2 100 grit disc is developed for natural wood, wood composites, and veneers, so it can work across solid stock, engineered panels, and veneered components in a single abrasive line.
The Rubin 2 30% faster removal rate clears wood more quickly at 100 grit, which shortens leveling and prep passes and supports higher throughput on doors, panels, and trim parts.
The 30% longer sheet life keeps each Rubin 2 disc effective over more parts, which reduces disc change interruptions and helps maintain momentum on repetitive sanding tasks.
The Rubin 2 special coating sheds wood fibers during sanding, which reduces loading on the abrasive surface and supports a more uniform scratch pattern on various woods.
This Rubin 2 disc is specified for hardwoods like oak or maple, soft woods like pine or fir, tropical woods like ebony or teak, and wood-based products, supporting broad woodshop use.
The hook and loop backing lets the Rubin 2 disc attach to compatible pads quickly, which supports fast grit changes during sanding sequences on different wood components.
The Festool Rubin 2 6 inch sanding disc in 100 grit provides a medium-cut aluminum oxide abrasive built around wood-finishing applications, so it aligns with common prep stages on natural wood, wood composites, and veneers. With a 30% faster removal rate and 30% longer sheet life, Rubin 2 supports efficient sanding passes and extended disc use across hardwoods like oak, softwoods like pine, tropical woods like teak, and wood-based products. The special coating that sheds wood fibers and the hook and loop backing together help sustain a consistent cut while supporting straightforward disc changes. For wood-focused sanding where consistent removal and longer disc life matter, this Rubin 2 6 inch disc offers a purpose-built option.
Sold In: 1 Box