Festool Rubin 2 6 inch sanding disc is a P220 grit aluminum oxide abrasive disc designed for wood-finishing applications, so it targets the surface preparation stage where scratch pattern and control matter. The Rubin 2 design delivers a 30% faster removal rate, which helps move through fine sanding steps more efficiently on large or repetitive runs. The disc also provides a 30% longer sheet life, so it stays productive longer between changes during sanding sequences. Rubin 2 is developed specifically for natural wood, wood composites, and veneers, which aligns the abrasive cut to typical cabinet, furniture, and millwork materials. A special coating sheds wood fibers as you sand, helping keep the abrasive from loading up and maintaining a more consistent cut. The Multi-Jetstream II configuration works with compatible extraction setups to support dust control at the disc surface.
The disc uses a hook and loop backing, so it attaches to compatible hook and loop sanding pads with a firm, reusable interface that still allows fast disc changes. This backing style lets you align the 6 inch disc on the pad, press it into the hooks, and immediately begin sanding without waiting for adhesives. The Multi-Jetstream II pattern is designed to match corresponding pad hole layouts, so when the disc is seated on a compatible pad, air and dust move through the system as intended. Aluminum oxide construction and the Rubin 2 coating work together with this interface, supporting a sanding workflow where disc changeover and dust extraction both fit into normal shop routines.
Rubin 2 discs are developed for natural wood, wood composites, and veneers, so they address common cabinet and furniture materials in one abrasive family. The abrasive is suitable for hardwoods like oak or maple, so it can be used on face frames, solid doors, and trim where grain density varies. It is also suited to soft woods like pine or fir, which supports sanding of carcasses, shelving, and moldings where resin content is higher. Rubin 2 can be used on tropical woods like ebony or teak, so it fits projects that mix dense exotics with more common species. The disc also works on wood-based products, aligning with tasks on panels, substrate cores, and veneered components, so the same P220 grit disc can follow multiple steps across the shop.
The P220 grit level provides a fine sanding step that refines the surface after coarser grits, so scratches are reduced before finishing or further preparation. Rubin 2 offers a 30% faster removal rate, meaning each pass at this grit removes material more efficiently, which helps when sanding broad surfaces at a finishing stage. The 30% longer sheet life means each disc can stay on the tool through more parts, which supports steady output when sanding doors, panels, or run-after-run components. The special coating that sheds wood fibers keeps the abrasive surface clearer as you move across natural wood, composites, and veneers, so the cut remains more consistent rather than loading quickly. The Multi-Jetstream II configuration supports dust movement at the disc face, and when combined with the hook and loop backing, it fits into sanding workflows where discs are swapped, aligned, and put back into production throughout the day.
Festool Rubin 2 220 grit discs are developed for natural wood, wood composites, veneers, and wood-based products, so they match typical cabinet, furniture, and millwork substrates.
The 30 percent faster removal rate means the disc removes wood more quickly at P220, helping move through fine sanding passes faster on panels, doors, and similar parts.
The 30 percent longer sheet life keeps each disc cutting effectively through more parts, so sanding runs experience fewer disc changes during ongoing work.
The special Rubin 2 coating sheds wood fibers as you sand, helping limit loading so the aluminum oxide abrasive keeps cutting consistently across the surface.
The hook and loop backing lets the disc fasten to matching pads while still allowing quick removal, supporting rapid disc changes during multi-grit sanding sequences.
The Multi-Jetstream II design works with compatible pads to move air and dust through the disc area, supporting dust control directly at the sanding surface.
Festool Rubin 2 6 inch sanding disc in P220 grit combines aluminum oxide abrasive, a special wood-focused coating, and a Multi-Jetstream II layout, so it fits fine sanding steps on natural wood, composites, veneers, and wood-based products. The 30% faster removal rate and 30% longer sheet life help keep sanding stages moving with fewer interruptions, while the hook and loop backing supports quick disc swaps between grits. For shops shaping, leveling, and finishing typical cabinet and furniture components, this Rubin 2 configuration provides a focused option for the P220 stage.
Sold In: 1 Box