Bessey 50" capacity k body parallel clamp kre3550 delivers secure clamping force up to 1,700 lb, so wide glue-ups and assemblies stay firmly in place under high pressure. The clamp is designed to clamp at 90 degrees to the rail with very large clamping surfaces, which helps keep panels, frames, and carcasses flat and square during setup. An ergonomic two component handle with a steel socket accepts a hex key or driver with a maximum torque of 17 Nm, letting you add controlled force in tight or repetitive jobs. The operating jaw stays where you put it for easy set up, so you can position parts without chasing a sliding head. The clamp belongs to the Bessey Tools K Body Revo line, giving woodworkers a parallel-style solution suited to cabinetry, furniture glue-ups, and similar assembly work.
The KRE3550 converts to spreading with no tools required by removing the end stop and reversing the operating head, which lets the same clamp handle both clamping and controlled expansion tasks. For smooth opening, releasing any clamping pressure, then pivoting the handle up and away from the rail allows the operating jaw to slide to increase the opening, which speeds repositioning between setups. For closing and clamping, pivoting the handle towards the rail and sliding the jaw to the work piece before tightening provides a quick transition from layout to final pressure. An operating jaw that stays where you put it supports repeatable setups along wide workpieces, helping maintain alignment over the full 50 inch capacity. These details support a straightforward workflow in cabinet shops and woodworking environments.
The Bessey Tools K Body Revo KRE3550 is a 50 inch capacity parallel clamp designed to clamp at 90 degrees to the rail, which supports accurate alignment for glued panels, doors, and carcasses. Secure clamping force up to 1,700 lb holds joints tight across large spans, which suits casework, benchtops, and wide frame assemblies. Very large clamping surfaces spread pressure over a broad area, which helps minimize dents and pressure points on workpiece faces. Two work piece supports prevent the clamped material from contacting the steel rail, allowing finished panels to rest on stable points instead of the bar. Three removable pressure caps that resist glue, paint, and solvents protect the jaws, which keeps clamping faces usable through repeated glue-ups and finishing operations in woodworking shops.
The operating jaw that stays where you put it for easy set up lets you pre-position jaws along the 50 inch length, which streamlines layouts on longer parts and reduces handling during dry fits. An ergonomic two component handle with a steel socket for a hex key or driver up to 17 Nm offers a defined torque range, which supports consistent clamping pressure across multiple identical assemblies. Converting to spreading in seconds with no tools required by removing the end stop and reversing the operating head turns the clamp into a spreader, which helps when pulling cases square or separating components under controlled force. For smooth opening, releasing clamping pressure and pivoting the handle up and away from the rail allows the jaw to slide, which speeds changeover between jobs. For closing and clamping, pivoting the handle towards the rail before sliding the jaw to the work piece gives a clear motion sequence, which supports efficient, repeatable work in small and large woodworking runs.
The Bessey KRE3550 provides secure clamping force up to 1,700 lb, which allows strong, even pressure on large glue-ups such as cabinet cases, panels, and frames.
The K Body Revo clamp is designed to clamp at 90 degrees to the rail with very large clamping surfaces, which helps keep workpieces square during assembly and curing.
The KRE3550 has an ergonomic two component handle with a steel socket for applying force with a hex key or driver, with a maximum torque of 17 Nm for controlled tightening.
The Bessey KRE3550 converts to spreading without tools by removing the end stop and reversing the operating head, which lets it apply controlled force in an expanding direction.
The three removable pressure caps on this clamp are resistant to glue, paint and solvents, helping protect both the jaws and workpiece surfaces through repeated glue-ups.
Two work piece supports hold the clamped material away from the steel rail, which helps keep finished faces off metal contact during clamping operations.
The Bessey 50" capacity k body parallel clamp kre3550 combines up to 1,700 lb of clamping force, 90 degree clamping to the rail, and very large clamping surfaces to support accurate assemblies. An ergonomic handle with steel socket, an operating jaw that stays where you put it, and fast conversion to spreading give one clamp multiple roles in a woodshop. For cabinet construction, panel glue-ups, and furniture frames, the KRE3550 offers parallel clamping capacity that supports square, stable results on demanding projects.
Sold In: 1 Each