82" Parallel K Body Bar Clamp, 3-3/4" Throat Depth

82 Inch Parallel Bar Clamp For Precise Glue Ups

82 inch parallel bar clamp describes this Bessey Tools K Body Revo clamp designed for woodworking projects that need long reach and controlled, even pressure. The 82 inch length supports edge-gluing wide panels or doors in a single setup, so large assemblies stay aligned during cure. A 3-3/4 inch throat depth lets the jaws reach well onto the work surface, which helps keep joints flat instead of tipping at the edge. The clamp is designed to hold jaws parallel at 90 degrees to the rail, so clamping force stays square to the glue line, reducing twist in cabinet parts or tabletops. With a secure clamping force up to 1,700 lb, it can pull tight fitting joints across long spans, which is useful on bowed boards or stubborn assemblies. This clamp is part of the K Body Revo line, giving installers and shop users a familiar, repeatable setup.

Key Bessey K Body Revo Clamp Working Advantages

• The secure clamping force up to 1,700 lb provides strong pressure along the glue line, which helps close gaps in panel glue ups and hold parts firmly during machining operations where movement would affect accuracy.
• Very large clamping surfaces distribute pressure over a broad area, which reduces denting on softer woods and helps keep veneered or laminated faces flatter during glue curing, improving overall surface quality.
• The ergonomic two component handle with steel socket allows force to be applied with hand grip or a hex key or driver up to 17 Nm, giving extra leverage when drawing together tight joints or heavy assemblies without straining the wrist.
• The operating jaw that stays where you put it supports quick one-person setups, because the jaw holds position on the rail while you position workpieces, reducing fumbling on long clamps and saving time on repetitive glue ups.
• Three removable pressure caps are resistant to glue, paint and solvents, so the jaw faces stay usable longer and are easier to clean after adhesive squeeze-out or finishing work near the clamping area.
• Two work piece supports keep the clamped material lifted off the steel rail, helping protect finished surfaces from rail contact and giving clearance that makes it easier to slide clamps under panels on the bench.

Parallel Clamp Setup, Spreading, And Release Details

This 82 inch parallel bar clamp is designed to clamp at 90 degrees to the rail, so once the rail is aligned with your reference edge, the jaws help keep panels in plane. The operating jaw that stays where you put it lets you preset jaw spacing near your final dimension, which speeds loading multiple parts. The clamp converts to spreading in seconds by removing the end stop and reversing the operating head, giving the same controlled action for pushing parts apart or expanding frames. For smooth opening, any clamping pressure in place is released, then the handle pivots up and away from the rail so the operating jaw can slide freely to increase opening for the next job.

Using The 82 Inch Clamp In Real Woodworking Setups

Where This 3-3/4 Inch Throat Depth Clamp Excels

The 3-3/4 inch throat depth gives this Bessey woodworking clamp reach beyond just the board edge, which helps when clamping face frames, door rails, or wider panels that need pressure further into the field. Because the jaws are designed to stay parallel and clamp at 90 degrees to the rail, the clamp works well on carcass assembly where square corners are critical. The 82 inch rail length supports long work such as tall pantry doors, closet panels, or multi-board tabletops assembled in a single row, which reduces the number of clamps required across the span. Two work piece supports hold stock off the steel rail, helping protect pre-sanded or pre-finished faces from marking during these longer glue ups. The three removable pressure caps resist glue, paint, and solvents, so they continue to provide a consistent, non-marring interface even after repeated adhesive squeeze-out.

How KRE3582 Clamp Details Support Repeatable Results

The KRE3582 parallel clamp uses an operating jaw that stays where you put it, which keeps your preset opening while you position and adjust work, making repeated production setups more consistent. For closing and clamping, the handle pivots towards the rail while you slide the jaw to the work piece, then you begin clamping, giving a smooth sequence that is easy to repeat from part to part. The ergonomic two component handle with a steel socket for a hex key or driver up to 17 Nm lets you dial in higher pressure consistently across multiple clamps, helping equalize force across long glue joints. When converting to spreading by removing the end stop and reversing the operating head, you gain a pushing function that can square frames or stretch assemblies using the same familiar control. Designed to clamp at 90 degrees to the rail with very large clamping surfaces, the clamp keeps pressure aligned and distributed, which supports straighter panels and cabinets and reduces rework due to twist or localized crushing.

Common Questions About The 82 Inch Parallel Clamp

Selecting This 82 Inch Clamp For Your Next Build

The 82 inch parallel bar clamp from Bessey Tools brings long reach, 3-3/4 inch throat depth, and up to 1,700 lb of controlled force to panel, frame, and cabinet work. Its K Body Revo design, with jaws that stay where you put them and very large clamping surfaces, supports accurate, repeatable glue ups on wider or taller parts. By using the ergonomic handle with hex socket and the quick pivot motions for opening and closing, you can move efficiently across multiple assemblies. For shops and serious woodworkers needing square, even pressure on larger projects, this KRE3582 parallel clamp is ready to go to work.