Hickory Hardware Crest Series pull brings a mid-century modern inspired profile that suits contemporary cabinet runs where a clean, curved line is preferred. The design is described as organic but symmetrical, so the pull reads soft to the eye while still laying out predictably across multiple doors or drawers. Simple, but with a touch of character, the slight curves add refined elegance that pairs well with flat-front or slab cabinet faces. This Crest Series pull uses a 3-3/4 inch (96 mm) center to center dimension, so it matches layouts drilled for that common spread. Material construction is zinc, giving a solid metal feel at the hand grip during everyday use. A satin nickel finish provides a muted metallic look that works well when coordinating with other satin nickel decorative hardware in the same space.
This 3-3/4 inch (96 mm) center to center pull is laid out for a common drilling pattern, which helps on replacements or new work where jigs are already set to that spread. The overall length of 4-5/16 inch keeps the pull slightly longer than the hole distance, so there is visible metal beyond each fastener point for a balanced look on standard drawer fronts. A projection of 1 inch sets the hand clearance off the face, creating space for fingers without pulling the hardware too far into walk paths. Width is 5/8 inch, giving a narrow but defined gripping edge that fits comfortably on typical cabinet rail heights used in kitchens, baths, or casework projects.
The Hickory Hardware Crest Series pull operates as a cabinet handle in the Decorative Hardware & Moldings category, so it fits work where visible pulls define the finished style of doors and drawers. With a 3-3/4 inch (96 mm) center to center dimension, this pull aligns with layouts drilled for that spacing on face-frame cabinets, frameless boxes, and utility casework using that standard. The 4-5/16 inch overall length allows it to sit proportionally on many base and wall cabinet fronts without overpowering narrower rails. A 1 inch projection positions the gripping surface away from the face enough for everyday opening tasks. The satin nickel finish pairs well with contemporary and transitional schemes that already use satin nickel on other decorative hardware & moldings.
The zinc material used in this Crest Series pull creates a uniform construction base, so multiple pulls on a run share the same weight and touch-point as drawers and doors are operated. That consistency matters when specifying hardware across a kitchen or commercial installation under a single style. The satin nickel finish is applied over the zinc body, giving the hardware a coordinated surface appearance that aligns with other satin nickel elements in the Belwith handles and pulls class. The organic but symmetrical design language keeps the shape repeatable from piece to piece, aiding installers who rely on visual alignment across long banks of cabinets. The 5/8 inch width defines a focused grip contact area that helps operators get a solid hold without occupying excessive face space, which is useful on smaller drawers or narrow stile conditions.
The Hickory Hardware Crest Series pull has a 3-3/4 inch (96 mm) center to center dimension, which suits cabinet layouts and drilling jigs set up for that common hardware spread.
The H076130-SN pull length is 4-5/16 inch, so it extends slightly beyond the mounting points for a balanced look on standard doors and drawers using the 96 mm spread.
The Crest Series satin nickel pull is made from zinc, giving a metal construction that provides a consistent feel and matches other zinc-based decorative hardware on a project.
This Belwith Keeler cabinet pull uses a satin nickel finish, which delivers a muted metallic surface that coordinates with other satin nickel hardware and fixtures.
The satin nickel cabinet pull has a 1 inch projection, creating finger clearance off the cabinet face while keeping the handle tight enough to avoid catching in high-traffic areas.
The Crest Series pull is inspired by mid-century modern curvatures and is described as organic but symmetrical, supporting contemporary cabinet styles with subtle character.
The Hickory Hardware Crest Series pull from Belwith Keeler combines a 3-3/4 inch (96 mm) center to center layout with a 4-5/16 inch overall length, so it suits cabinet layouts drilled to that spread. Its zinc construction and satin nickel finish help align both feel and color across decorative hardware & moldings on the same job. For projects targeting an organic but symmetrical mid-century modern influence with simple curves, this Crest pull offers a consistent profile that supports contemporary cabinet and drawer fronts.
Sold In: 1 Each
