Hickory Hardware Crest Series 12" (305 mm) Center to Center Satin Nickel Pull, - H076135-SN

Hickory Hardware Crest Series 12 Inch Pull Use

Hickory Hardware Crest Series 12 inch pull gives you a 12 inch center to center grip that spans wider cabinet doors or drawers with a single piece, which helps keep layouts clean on large contemporary fronts. The 12-1/2 inch overall length leaves a small margin past the drilled centers, which provides visual balance on full-overlay or tall drawer faces. The 5/8 inch width creates a slim profile across the panel, which keeps the pull from visually overpowering narrow rails. A 1-1/16 inch projection brings the handle comfortably off the face, which creates enough finger clearance for everyday use on doors and drawers. The satin nickel finish adds a muted metallic surface, which works well when matching other satin nickel decorative hardware. The Crest collection styling is inspired by mid-century modern curvatures, which supports organic but symmetrical lines on contemporary cabinet designs.

Key Crest Collection Pull Details In Practice

• The 12 inch center to center dimension sets consistent hole spacing, which simplifies drilling layouts when carrying this Belwith Keeler pull across multiple cabinets.
• The 12-1/2 inch length lets the pull reach across wider fronts, which is useful for stretching hardware across large drawers or pantry doors in one continuous line.
• The 1-1/16 inch projection pulls the grip away from the door face, which provides space for fingers to hook behind the pull on thicker door styles.
• The 5/8 inch width keeps the handle visually light, which helps it sit neatly on narrow rails or smaller drawers without crowding edge details.
• The satin nickel finish matches other satin nickel components, which supports a unified hardware look across kitchens, baths, or built-ins.
• The zinc material forms the Crest series pull body, which gives a solid metal handle for everyday cabinet and drawer operation.

12 Inch Center To Center Pull Layout Details

The 12 inch center to center mounting on this H076135-SN satin nickel pull establishes a wide, repeatable drilling pattern, which works well when you want long linear hardware across a run of cabinets. The 12-1/2 inch overall length leaves a quarter inch beyond each mounting point, which provides a small visual overhang without extending too close to adjacent edges. The 1-1/16 inch projection keeps the grip proud of decorative door profiles, which helps hands clear raised panels. The 5/8 inch width runs as a narrow bar across the face, which allows this Crest collection handle to sit cleanly on both tall pantry doors and horizontal drawers.

Using This Belwith Keeler Pull On Projects

Where The Crest Series 12 Inch Pull Fits

This Belwith Keeler Crest collection cabinet pull is designed with organic but symmetrical curvature, which suits contemporary and mid-century modern cabinet runs. The 12 inch center to center spacing positions it for use on wide drawer fronts, which is helpful when matching hardware scale to large storage pieces. The 12-1/2 inch length spans a good portion of tall doors, which can visually tie upper and lower cabinets together. The satin nickel finish coordinates with other satin nickel decorative hardware, which supports consistent metal tones on doors, drawers, and surrounding fittings. The 5/8 inch width allows this handle to land on narrow rails, which keeps it usable on both small and large fronts in the same room.

Why These Pull Dimensions Support Consistent Results

The 12 inch center to center cabinet pull layout supports templates or repetitive drilling, which can reduce layout time when installing multiple Crest series pulls in a kitchen or shop build. The 1-1/16 inch projection sets a predictable stand-off from the face, which keeps hand clearance consistent from one cabinet box to the next. The 12-1/2 inch overall length stays slightly longer than the hole spacing, which helps align the handle visually with cabinet proportions without crowding corners. The 5/8 inch cabinet pull width maintains a slender bar across the panel, which leaves room for other design details such as reveals or edge profiles. The zinc material forms a solid cabinet handle body, which supports repeated opening and closing on doors and drawers. The satin nickel finish presents a subdued sheen, which helps the pull sit quietly against both light and dark finishes while still reading as a defined hardware line.

Common Questions About The H076135-SN Pull

Selecting This Satin Nickel Pull For Your Run

The Hickory Hardware Crest Series 12 inch pull with 12 inch center to center spacing gives a long, consistent handle option for wide cabinets, which helps scale hardware to larger doors and drawers. The satin nickel finish lets this Belwith Keeler piece align with other satin nickel items in the project. With 12-1/2 inch length, 1-1/16 inch projection, and 5/8 inch width, the Crest collection H076135-SN offers a defined set of dimensions, which supports planned layouts across kitchens, baths, or built-in cabinetry.