Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Crest Series pull provides a 7-9/16 inch (192 mm) center to center grip, so installers can span standard cabinet hole patterns with a single, consistent handle line. The Crest collection design is inspired by the curvatures prevalent in mid-century modern style, which gives casework and doors an organic but symmetrical look that suits contemporary projects. Made from zinc, this pull offers a solid, weighty feel that supports dependable daily use on frequently opened cabinet doors and drawers. The satin nickel finish delivers a muted metallic surface that helps visually blend with many popular hinge and appliance finishes. At an overall length of 8-1/16 inches, the pull visually anchors wider drawer fronts while still working on tall doors. A 1 inch projection and 5/8 inch width create a comfortable hand clearance and grip profile during everyday operation.
This Crest Series pull is specified with a 192 mm (7-9/16 inch) center to center measurement, so it fits layouts drilled for that spacing on both doors and drawers. The 1 inch projection sets the pull off the cabinet face enough to clear typical door and drawer edge profiles while still keeping a tight, streamlined look against the front. With an overall length of 8-1/16 inches, the pull suits wider drawers where a longer grip helps distribute hand force across the front. The 5/8 inch width keeps the footprint narrow, allowing installation on face frames, slab fronts, or panel doors without crowding neighboring hardware.
The Crest Series 7-9/16 inch (192 mm) center to center satin nickel pull works well wherever a mid-century modern inspired profile is desired on cabinetry. Its organic but symmetrical curves line up with contemporary kitchens, baths, and built-ins that need a subtle design detail rather than ornate hardware. The satin nickel finish lets this pull sit comfortably next to many hinges and appliances finished in similar tones, helping installers deliver a coordinated look across the project. Because the pull measures 8-1/16 inches overall, it is especially suited to wider drawers and tall doors, where a longer handle length looks proportional to the front. The 1 inch projection and 5/8 inch width give enough surface to grip without adding extra bulk to narrow rails, so it can be used in banks of drawers or on smaller doors within the same room.
The defined 192 mm (7-9/16 inch) center to center spacing allows installers to set up drilling jigs once and repeat hole locations across an entire run of fronts, which supports straight, aligned hardware lines. Zinc construction provides a solid feel when the pull is grasped, so doors and drawers open in a controlled way that reflects well on the finished installation. The satin nickel finish offers a smooth surface that visually softens the pull outline, helping it sit flush within modern cabinet designs without sharp visual transitions. With a 1 inch projection, the pull keeps hands clear of the cabinet face while still holding the hardware close, which helps reduce snag points in tight walkways and around island corners. The 5/8 inch width ensures enough contact area for a firm grip, supporting heavier loaded drawers while maintaining the slim profile expected from mid-century modern inspired hardware.
The H076133-SN pull has a 7-9/16 inch (192 mm) center to center, an 8-1/16 inch overall length, a 1 inch projection, and a 5/8 inch width, giving clear guidance for cabinet layout.
This Crest Series pull is made from zinc with a satin nickel finish, providing a solid feel with a soft metallic appearance suited to contemporary cabinet projects.
The 192 mm center to center spacing matches a standard drilling distance, so installers can use templates or jigs to repeat hole locations consistently across cabinets.
The Crest pull dimensions and 7-9/16 inch center to center spacing work on both cabinet doors and wider drawers, supporting a unified look across a full installation.
The Crest collection is inspired by mid-century modern curvatures, so this pull suits organic but symmetrical, contemporary cabinet designs without heavy ornamentation.
The H076133-SN satin nickel pull is from Belwith Keeler under the Hickory Hardware Crest Series, giving a clear reference when matching existing hardware lines.
The Hickory Hardware Crest Series 7-9/16 inch (192 mm) center to center satin nickel pull brings mid-century modern inspired curves, zinc construction, and precise dimensions to cabinet projects. With its 8-1/16 inch length, 1 inch projection, and 5/8 inch width, it fits doors and drawers that call for a slim, contemporary handle. Specifying the H076133-SN part number lets you repeat the same satin nickel Crest profile across kitchens, baths, and built-ins for a consistent, coordinated hardware line.
Sold In: 1 Each
