Hickory Hardware Crest Series 12 inch pull gives a 12 inch center to center grip that spans wide drawer or door fronts, providing a long, stable handhold across contemporary cabinetry. The Crest collection design is inspired by curvatures prevalent in mid-century modern design, so the pull brings an organic but symmetrical look that works cleanly on modern casework. The slight curves add refined elegance, softening straight cabinet lines without adding visual bulk. The pull has an overall length of 12-1/2 inches, so it covers a generous area on larger fronts, helping visually balance tall doors or wide drawers. A projection of 1-1/16 inches creates space behind the pull for fingers, supporting comfortable everyday use on frequently accessed cabinets. The 5/8 inch width presents a slim front profile, keeping the hardware visually light while still reading as a defined design element.
The 12 inch center to center measurement of this Belwith Keeler pull defines the exact distance between mounting points, letting installers transfer that dimension directly to drilling templates or shop jigs. With an overall length of 12-1/2 inches, the pull slightly overhangs the drilled spread, making it easier to visually center on wider rails or drawer fronts. A projection of 1-1/16 inches sets how far the pull stands off the surface, so the hardware clears door edges and trim while still feeling close to the face for fingertip control. The 5/8 inch width identifies the front profile, which matters when lining up multiple pulls across banked drawers to keep reveals and sightlines uniform.
The Crest collection description highlights curvatures prevalent in mid-century modern design, so this H076135-CH pull pairs well with contemporary cabinet fronts that echo that style. Its organic but symmetrical form suits slab or simple five-piece doors where hardware becomes a key visual detail rather than just a functional part. The 12 inch center to center length is suited to wider drawers or taller doors, giving substantial hand coverage and making it easier to grab near the edge or center. A 12-1/2 inch overall length means a single pull can span much of a drawer width, which is useful on kitchen bases, pantry pullouts, or large vanity drawers. The 1-1/16 inch projection enables a full finger wrap from above or below, which supports everyday use in high-traffic kitchen and bath installations.
The defined 12 inch center to center spacing lets installers or shop teams standardize boring patterns across a run of cabinets, cutting layout time on repetitive work. When replacing existing 12 inch pulls, that same spacing allows a direct swap without altering door or drawer fronts. The 5/8 inch width helps keep pulls aligned visually; when multiple units are laid out, the slim profile keeps hardware from crowding neighboring fronts. A projection of 1-1/16 inches sets a repeatable stand-off that looks consistent from cabinet to cabinet, which matters when hardware runs across long walls. The chrome finish delivers a uniform surface appearance, so rows of these pulls reflect light evenly and present a continuous line along upper and lower cabinetry. The Crest collection emphasis on simple shape with a touch of character helps maintain a consistent design language throughout a project while still giving each run of cabinets a defined focal point.
The H076135-CH pull has a 12 inch center to center spacing, 12-1/2 inch overall length, 1-1/16 inch projection, and 5/8 inch width, guiding drilling layout and how it presents on the cabinet.
The Crest Series 12 inch pull is made from zinc, giving a solid metal construction that supports regular cabinet use in residential and light commercial settings.
This Belwith Keeler pull has a chrome finish, providing a bright, reflective surface that coordinates with chrome faucets, hinges, and other decorative hardware.
The 12 inch center to center size provides a clear drilling dimension, which supports repeatable mounting across multiple doors or drawers using standard jigs or templates.
The 1-1/16 inch projection sets the pull off the door surface so fingers fit behind it easily, improving grip and comfort during frequent opening and closing.
The Crest collection is described as inspired by curvatures prevalent in mid-century modern design, offering an organic but symmetrical look for contemporary cabinets.
The Hickory Hardware Crest Series 12 inch pull pairs mid-century modern inspired curves with clearly defined dimensions, giving installers a hardware option that looks intentional and lays out predictably. With its 12 inch center to center spacing, 12-1/2 inch overall length, zinc construction, and chrome finish, it suits wide drawers and contemporary fronts that benefit from a long, slim pull. For cabinet runs calling for a consistent modern look and repeatable drilling across the shop or jobsite, this Belwith Keeler H076135-CH pull is a practical choice to add to your hardware list.
Sold In: 1 Each
