Hickory Hardware Crest Series pull gives a mid-century modern inspired option for cabinet and furniture projects where a clean, contemporary line is needed. The Crest design is described as organic but symmetrical and simple, with a touch of character, so it introduces visual interest without fighting surrounding finishes. Its slight curves are noted to add refined elegance to any contemporary style, which helps tie together flat-panel doors or streamlined casework. The center to center dimension is 6-5/16 inches, or 160 mm, so it fits layouts drilled for that specific spread. Overall length of 6-13/16 inches means the grip extends a bit beyond the hole spacing, which can help with hand clearance around door edges. A projection of 1 inch and width of 5/8 inch provide a slim profile that stays close to the surface, useful on tight runs of cabinets.
The 160 mm center to center measurement defines the hole layout for this Crest Series cabinet pull, so it aligns with fronts or drawer faces set up for that European-standard spread. Matching a 6-5/16 inch drilling pattern allows direct swap on panels already bored to that spacing, which supports straightforward replacement work. With its 6-13/16 inch overall length, the ends of the pull extend slightly beyond the holes, which can help visually center the handle on wider drawers. A projection of 1 inch means the pull stays close to the cabinet, supporting use on doors near walls or adjacent cabinets where deeper hardware could interfere. The 5/8 inch width keeps the pull slender, which can be useful when running multiple handles across narrow drawer banks.
This Hickory Hardware Crest Series 6-5/16 inch center to center chrome pull suits cabinet and furniture projects built around contemporary style. The description notes it is inspired by curvatures prevalent in mid-century modern design, so it pairs naturally with flat-front or slab-style doors commonly used in that aesthetic. Because it belongs to the Crest Collection, installers can maintain continuity of look across kitchens, vanities, or built-ins that draw from the same design language. Its chrome finish coordinates with other chrome decorative elements in a room, helping tie together faucets, hinges, or other visible components. The 160 mm center to center dimension matches wide-pull applications such as larger drawers or tall pantry doors, where broader spacing helps distribute hand load. At 6-13/16 inches overall length, the pull presents a substantial visual span on these larger fronts while still following the same drilling standard.
The pull is made from zinc, providing a metal body for this Crest Series handle that supports a solid-feeling grip in everyday cabinet use. Its chrome finish adds a bright, reflective layer over the zinc base, giving the pull a clean appearance that blends into polished contemporary interiors. A 1 inch projection keeps the pull from standing too far off the face, which helps on cabinets located near corners or walkways where lower-profile hardware reduces snag points. The 5/8 inch width concentrates the visual mass into a slim band, supporting neat alignment when multiple pulls are installed in rows. With a center to center measurement of 6-5/16 inches, the pull supports layouts where consistent spacing is critical across banks of drawers or tall cabinet doors. The combination of organic but symmetrical curves and simple form lets installers deliver a unified look that carries the same character across an entire Crest Collection project.
The Hickory Hardware Crest Series pull uses a 6-5/16 inch, or 160 mm, center to center measurement, which sets the required hole spacing for cabinet or drawer front installation.
The Crest Series H076132-CH pull has an overall length of 6-13/16 inches, so it visually spans a good portion of larger doors or drawers while matching a 160 mm hole layout.
The H076132-CH pull is made from zinc with a chrome finish, giving a metal handle body with a bright, reflective surface that coordinates with other chrome decorative hardware.
The Hickory Hardware Crest Series pull has a 1 inch projection, so it sits relatively close to the cabinet face while still leaving room for a functional hand grip.
The Crest Collection is described as inspired by mid-century modern curvatures and as simple with slight curves, making it a fit for contemporary style cabinet and furniture projects.
The Belwith Keeler H076132-CH pull has a width of 5/8 inch, giving a narrow profile that supports a streamlined look on doors and drawer fronts.
The Hickory Hardware Crest Series 6-5/16 inch center to center chrome pull brings a mid-century modern influenced form to contemporary cabinet runs where consistent 160 mm drilling is already planned. Its zinc construction, chrome finish, and slim 5/8 inch width deliver a narrow yet substantial handle across doors and drawers. With a 1 inch projection and 6-13/16 inch overall length, it suits wider fronts that benefit from a longer grip while keeping to a low profile. For projects needing a Crest Collection option that pairs organic curves with a clean chrome surface, this Belwith Keeler H076132-CH pull offers a straightforward match.
Sold In: 1 Each
