Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
PULL 128MM C/C, GLOSSY NICKEL FINISH describes a Hickory Hardware Streamline Series pull designed for modern cabinet and furniture fronts, so installers get a consistent, minimalist look that lines up with standard drilling patterns on many contemporary layouts. The 5-1/16 inch center to center drilling pairs with a total length of 5-3/4 inch, giving enough hand clearance while staying proportional on doors and drawers in the mid-size range. The glossy nickel finish reflects light cleanly, which helps pulls visually align across a full run of cabinets in kitchens, baths, or shop-built casework. Zinc material construction provides a solid-feeling handle during daily use, supporting repeated opening and closing without a flimsy feel. Branded under Belwith Keeler with manufacturer part HH075268-GN, this Streamline pull ties into a known decorative hardware line, useful when matching existing hardware in a project.
The 5-1/16 inch center to center measurement on the HH075268-GN Streamline pull defines the mounting hole spacing, which guides drilling or aligns with existing holes on replacement jobs where that pattern is already present. With a 3/4 inch projection, the pull sits at a low profile from the door or drawer face, which matters where clearance to adjacent cabinetry or walls is limited but fingers still need enough room to pull. The 1/2 inch width concentrates the contact area, which suits narrow stiles and rails often found on modern slab or shaker-style fronts. The 5-3/4 inch overall length creates end-to-end coverage that can visually center on mid-width fronts, which helps maintain straight sightlines along banks of drawers or doors in a run.
The Hickory Hardware Streamline Series 5-1/16 inch center to center glossy nickel pull is designed around a minimalist profile, which suits flat-front or simple recessed-panel cabinetry where straight lines are important to the overall look. With zinc material providing the structure, the pull handles routine opening cycles on kitchen, bath, or built-in storage units while keeping weight manageable on the door or drawer face. The glossy nickel finish ties in with other nickel elements, such as hinges or appliance details, so runs of cabinets maintain a coordinated finish across multiple components. The 5-3/4 inch overall length aligns well with medium-size fronts, which lets installers repeat the same pull across upper doors, base cabinets, and many drawer widths for a uniform project. Center to center spacing at 128 mm also reflects a common metric drilling standard, which helps when working from European-style layouts.
The 128 mm center to center layout on this Belwith Keeler Streamline cabinet pull matches a frequently used metric spacing, which simplifies repeating hole locations across multiple doors and drawers when using system drilling equipment. A 3/4 inch projection keeps the pull closer to the surface, which can reduce interference near corners or tight reveals while still allowing fingers to hook behind the bar. The 1/2 inch width concentrates visual mass into a slim line, which helps keeps attention on the cabinet faces rather than the hardware while still giving a defined edge to grasp. Zinc construction produces a solid handle body for this HH075268-GN glossy nickel pull, so users experience a firm pull point each time they operate the cabinet. By pairing the Streamline collection styling with these dimensions, installers can repeat the same part across many cabinet types, which reduces layout variation and streamlines hardware specification on a job.
The Hickory Hardware Streamline Series HH075268-GN pull has a 5-1/16 inch, or 128 mm, center to center, which sets the drilling distance between mounting holes for cabinet doors and drawers.
The HH075268-GN pull has a 5-3/4 inch overall length, which provides extra grip area beyond the 5-1/16 inch mounting spread for comfortable use on cabinet fronts.
This glossy nickel zinc cabinet handle has a 3/4 inch projection, which keeps it relatively low profile while allowing enough finger space to open doors and drawers effectively.
The Streamline HH075268-GN pull is made from zinc, which creates a rigid pull body suited to regular cabinet use in kitchens, baths, or storage areas.
This Hickory Hardware Streamline pull uses a glossy nickel finish, which offers a bright, reflective appearance that pairs with other nickel-finished hardware on the project.
The HH075268-GN pull is part of the Hickory Hardware Streamline Series under the Belwith Keeler brand, which helps align it with matching decorative hardware pieces.
The Hickory Hardware Streamline Series HH075268-GN pull from Wurth Baer Supply combines 5-1/16 inch center to center spacing, a 5-3/4 inch overall length, and a 3/4 inch projection, giving installers a clear, repeatable hardware choice for modern cabinet runs. The glossy nickel finish and zinc construction support a clean, minimalist look that still feels solid in use on doors and drawers across kitchens, baths, or built-ins. For projects calling for a consistent 128 mm center to center layout and Streamline styling, this Belwith Keeler cabinet pull offers a defined set of dimensions that simplifies hardware selection on the job.
Sold In: 1 Each
