Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Streamline pull is a zinc cabinet handle from the Streamline collection by Belwith Keeler that provides a minimalist look, which helps cabinets match modern decor on kitchen, bath, or shop projects where clean lines are important. This glossy nickel cabinet pull has a 3-3/4 inch center to center hole spacing, so it works where 96 mm drill patterns are already laid out or specified on drawings. The pull length of 4-1/2 inches gives techs enough grip area for regular cabinet doors while staying compact on smaller fronts. A projection of 3/4 inch keeps the handle low profile off the face, which reduces snag points in tight walkways or busy work areas. The 1/2 inch width presents a slim front edge, which supports the streamlined appearance when multiple pulls are lined up across banks of doors and drawers.
This HH075267-GN pull is specified with 3-3/4 inch (96 mm) center to center spacing, which lets it mount to standard cabinet door and drawer fronts where that drilling distance is already in place. The zinc construction gives the handle a stable threaded engagement at the mounting points, which supports repeatable tightening on typical cabinet substrates. With a projection of 3/4 inch, the pull stands off the surface enough for a practical hand grip, which helps avoid knuckle contact with the cabinet face during use. The 4-1/2 inch overall length positions the mounting points inboard from the ends, which keeps stress centered over the connection areas when doors are pulled open. The glossy nickel finish is applied over the pull body, which provides a consistent color tone across multiple pieces on the same job.
This Hickory Hardware Streamline pull with 96 mm center to center spacing works on cabinet doors or drawers drilled for 3-3/4 inch pulls, which suits many kitchen, bath, and shop layouts based on that standard dimension. The glossy nickel finish pairs well with other glossy nickel cabinet hardware, which helps maintain a unified look on projects using matching hinges, knobs, and pulls from similar finish families. The slim 1/2 inch width and low 3/4 inch projection create a streamlined profile, which is useful on modern slab or simple shaker-style fronts where a low visual footprint is preferred. At 4-1/2 inches overall length, this pull sits proportionally on common cabinet widths, which keeps hardware from overwhelming narrow fronts while still providing enough grab area on wider drawers.
The fixed 3-3/4 inch (96 mm) center to center measurement on this HH075267-GN pull gives installers a repeatable drilling reference, which helps rows of doors and drawers line up cleanly when using standard jigs or templates. Zinc construction provides a uniform base material, which supports consistent threading at both mounting points so pulls seat evenly against the cabinet face. The 3/4 inch projection allows fingers to wrap behind the pull without excessive reach, which can reduce wear on cabinet surfaces from repeated contact over time. The 1/2 inch width keeps the handle narrow, which helps maintain even spacing between adjacent pulls on closely set drawers. The glossy nickel finish delivers a continuous reflective surface from end to end, which supports a clean look when many pulls are installed across long cabinet runs.
The Hickory Hardware Streamline pull uses 3-3/4 inch (96 mm) center to center spacing, which matches common cabinet drilling patterns for handles and supports straightforward layout work.
The HH075267-GN glossy nickel cabinet pull has a length of 4-1/2 inches, which provides a practical gripping area while staying proportionate on standard cabinet doors and drawers.
The 96 mm center to center pull projects 3/4 inch from the cabinet face, which creates space for fingers behind the handle while keeping the profile close to the door or drawer.
The Belwith Keeler Streamline pull is made from zinc, which provides a solid body for threading and everyday cabinet use in residential or light commercial environments.
This Streamline series cabinet pull has a glossy nickel finish, which gives the handle a bright, reflective look that coordinates with other glossy nickel hardware on the project.
This low profile cabinet pull with 3/4 inch projection suits cabinets where a streamlined handle is preferred, helping reduce snag points along walkways and work surfaces.
The Hickory Hardware Streamline pull in glossy nickel combines a 3-3/4 inch (96 mm) center to center layout with a 4-1/2 inch length, which aligns well with standard cabinet drilling and proportions on many projects. Zinc construction and a 3/4 inch projection provide a practical grip profile, which supports daily operation on doors and drawers in kitchens, baths, or shop installs. When a minimalist, glossy nickel finish is part of the design plan, this HH075267-GN pull offers a defined set of dimensions that help you plan hardware placement confidently across your next run of cabinets.
Sold In: 1 Each
