Hickory Hardware Streamline pull is a zinc cabinet handle designed for modern, minimalist installations where a clean, linear look matters. The pull comes from the Streamline collection, so its shape supports simple, straight runs across doors and drawers for consistent alignment. The 5-1/16 inch (128 mm) center to center dimension sets accurate drill spacing, which helps installers keep rows of pulls visually straight. A toasted nickel finish ties into contemporary decor, allowing the hardware to blend with many brushed metal fixtures. The 5-3/4 inch overall length gives enough hand room across wider drawer fronts, which supports comfortable gripping during daily use. A 3/4 inch projection keeps the pull close to the cabinet face, which is useful where walkways are tight and hardware must stay low profile. The 1/2 inch width presents a slim front, helping doors close without interference around adjacent fronts.
The 128 mm center to center measurement defines the exact drilling pattern for this pull, which simplifies jig setup and repeat drilling across multiple cabinets. With a 5-3/4 inch overall length, the handle extends slightly beyond the mounting holes at each end, which helps installers visually center the pull on drawer fronts. The 3/4 inch projection keeps the grip close to the face, which can reduce the chance of catching clothing in narrow aisles. A 1/2 inch width provides a slim contact surface against the cabinet, which supports clean alignment along narrow rails or stile edges. Because the pull is part of the Streamline collection, its straight geometry supports installation in horizontal or vertical orientation while maintaining a unified look across a project.
The 5-1/16 inch (128 mm) center to center size places this Toasted Nickel cabinet pull in a range often used on medium and larger fronts, which helps it read correctly on many base cabinets and wider drawers. Its 5-3/4 inch overall length provides a noticeable span, giving hands a clear target on heavier fronts where extra leverage improves opening action. The 3/4 inch projection creates enough space behind the pull for fingers to wrap, which matters when users open doors many times each day. A 1/2 inch width limits the footprint on narrow face frames or slab doors, which helps maintain balanced proportions when used in grids or tall cabinet runs. Belwith Keeler branding and the Streamline collection identity give installers a recognizable style reference, which supports matching this pull with other Streamline pieces specified on the same job.
The defined 128 mm center to center dimension allows installers to standardize jig settings, which reduces layout time and helps keep hardware alignment consistent from cabinet to cabinet. The toasted nickel finish establishes a uniform surface color, which supports a continuous visual line when the pull is repeated across a kitchen or bath. A 5-3/4 inch overall length ensures that the handle extends beyond the mounting points, which helps cover minor drilling variations and still present straight end lines. The 3/4 inch projection keeps the pull closer to cabinet faces, which can help reduce interference with adjacent doors that open past each other. The 1/2 inch width maintains a lean profile, which works well with the minimalist intent of the Streamline collection and supports clean, uninterrupted cabinet designs. As a zinc pull, the part number HH075268-TN clearly identifies this specific size and toasted nickel finish, which aids ordering the same model again for future matching work.
The Hickory Hardware Streamline pull has a 5-1/16 inch (128 mm) center to center size, which sets the exact drilling distance between holes for consistent cabinet layouts.
The HH075268-TN pull measures 5-3/4 inches overall length, so it spans a wider area on the front and suits medium to larger cabinet doors and drawers.
This Streamline Series cabinet pull projects 3/4 inch from the cabinet face, giving finger clearance while keeping the handle close for tight walkway situations.
The Hickory Hardware Streamline Series pull is made from zinc, providing a solid metal construction suited to everyday cabinet use.
The HH075268-TN pull has a toasted nickel finish, which matches other toasted nickel decorative hardware on the same project.
This pull is part of the Streamline collection, so its minimalist shape supports modern cabinet designs with straight, clean lines.
The Hickory Hardware Streamline pull with 128 mm center to center spacing, 5-3/4 inch overall length, and 3/4 inch projection delivers a defined drilling pattern and low-profile grip for modern cabinets. The toasted nickel finish and slim 1/2 inch width support clean, coordinated runs across doors and drawers. Belwith Keeler branding and the HH075268-TN part number identify this exact zinc pull, which simplifies specifying the same style wherever a consistent Streamline look is required on a project.
Sold In: 1 Each
