Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Streamline pull is a 12 inch center to center cabinet handle from the Streamline collection, so it spans wide drawer fronts or doors with a single, consistent grip. The toasted nickel finish ties into modern decor, giving installers a neutral metallic tone that works across many contemporary layouts. The pull is made from zinc, which provides a solid metal feel while keeping weight manageable on typical cabinet constructions. At 14 inches overall length, the handle extends past the mounting holes for a visually balanced look on longer drawer faces. A projection of 3/4 inch sets the hand clearance off the door or drawer front, supporting a low-profile appearance while still allowing fingers to catch the pull efficiently. A width of 1/2 inch creates a slim front view, which helps keep the hardware visually light across a run of cabinets.
The 12 inch center to center spacing on this Belwith Keeler handle pull sets a clear drilling pattern for mounting on cabinet doors or drawers. With a 14 inch overall length, the ends of the pull extend beyond the fastener points, which helps with visual alignment during installation. The 3/4 inch projection determines how far the handle stands off the surface, which matters when aligning hardware depths across mixed cabinet lines in the same room. A 1/2 inch width defines the front profile of the pull, guiding where the handle will sit relative to panel edges or decorative rails. The toasted nickel finish ties into the overall layout, providing a consistent appearance from piece to piece once mounted in a run.
This HH076266-TN cabinet pull from the Streamline series is defined by its 12 inch center to center dimension, so it suits cabinet doors and drawers that benefit from a longer handhold. The 14 inch overall length gives the pull presence on wider faces, making it suitable for large kitchen drawers or tall pantry doors where a short handle might look undersized. The toasted nickel finish supports projects that call for a muted metallic tone rather than highly reflective surfaces, allowing it to coordinate with many hinges or appliances that share a similar coloring. Because the pull sits at 3/4 inch projection, it suits layouts aiming for a low-profile line of hardware along cabinet fronts.
The 1/2 inch width keeps the handle visually narrow, which fits cabinets where the hardware should complement, not dominate, the door style. The zinc construction supports use in residential or light commercial cabinetry where metal pulls are standard. Within the Decorative Hardware & Moldings category, this handle and pull configuration aligns with modern cabinet updates that call for extended-size hardware. Across a sequence of doors, the repeated 12 inch on-center drilling pattern helps keep spacing uniform from cabinet to cabinet.
The combination of a 12 inch center to center and 14 inch overall length gives installers predictable margins at each end of the pull, which simplifies measuring reveals on doors and drawers. The 3/4 inch projection sets a uniform standoff from the cabinet face, so when several HH076266-TN cabinet pulls are used together, they create a straight visual line in side view. The 1/2 inch width limits how much face area the hardware occupies, which helps maintain the intended look of flat-panel or shaker fronts while still providing an obvious grip point.
The toasted nickel finish establishes a consistent color reference, which assists when aligning this Streamline series cabinet hardware with other pieces from the same finish family in a project. Because the pull is made from zinc, its weight and feel remain similar from one unit to the next, supporting a consistent opening experience across all affected doors and drawers. The defined measurements allow fabricators and installers to plan hole drilling and layout in advance, which helps support repeatable installations on multi-cabinet jobs.
The HH076266-TN pull has 12 inch center to center spacing, a 14 inch overall length, 3/4 inch projection, and 1/2 inch width, which guide drilling layout and visual balance on cabinet fronts.
The 12 inch center to center mounting dimension supports use on wider doors or drawers, providing a longer gripping area and a repeatable drilling pattern across multiple cabinets.
The toasted nickel finish gives the cabinet pull a consistent, modern metallic tone, helping it coordinate visually with contemporary decor and other hardware in a similar color range.
The 3/4 inch projection sets how far the pull stands off the cabinet face, balancing low-profile appearance with enough clearance for fingers to grip and operate doors or drawers.
The zinc material provides a metal body for the pull, giving a solid feel in hand and supporting typical use cycles on cabinets in kitchens, shops, or similar spaces.
This toasted nickel cabinet pull is part of the Streamline collection, aligning its look with other Streamline series cabinet hardware pieces for coordinated projects.
The Hickory Hardware Streamline pull with 12 inch center to center spacing, 14 inch overall length, and 3/4 inch projection offers a defined layout for modern cabinets using extended-size hardware. The toasted nickel finish and zinc construction align with contemporary projects where consistent metal pulls are required. For jobs needing a longer gripping surface and coordinated Streamline series cabinet hardware, this HH076266-TN cabinet pull from Wurth Baer Supply matches those dimensional and finish requirements.
Sold In: 1 Each
