Hickory Hardware Streamline pull provides a 3 inch center to center gripping area that lines up with standard cabinet drilling, which supports straightforward layout when updating doors and drawers. The toasted nickel finish delivers a muted metallic look that fits modern decor, so it suits projects aiming for clean, minimalist lines. The pull body is made from zinc, giving a solid-feeling handle that stands up to regular cabinet use in kitchens, baths, or shop casework. Overall length of 3-3/4 inches keeps the pull compact on smaller fronts while still offering enough hand clearance, which is useful on narrow drawer faces. A low 3/4 inch projection keeps the profile tight to the cabinet face, helping reduce snag points in tight walkways. At 1/2 inch width, the pull presents a slim front view that reads clean across a run of cabinets.
This 3 inch center to center cabinet pull is laid out for holes spaced 3 inches apart, which matches a standard boring pattern on many residential and shop-built cabinets. With a 3-3/4 inch overall length, the pull leaves a modest margin beyond the mounting points, giving a balanced look on typical 12 to 18 inch wide doors and standard drawers. The 3/4 inch projection determines how far the pull stands off the door, which affects knuckle clearance when gripping from the side or below. A 1/2 inch width keeps the contact area lean, which can be useful where several pulls are placed close together on stacked drawers. The toasted nickel finish from the Streamline collection visually ties multiple pulls together, supporting consistent alignment when running this hardware across whole rooms or banks of cabinets.
This Hickory Hardware Streamline series pull in toasted nickel finish works well anywhere a 3 inch center to center layout is planned, because the mounting dimension follows a widely used cabinet standard. The muted toasted nickel tone pairs reliably with painted, stained, or laminate cabinet faces, which helps one pull style serve across kitchens, baths, offices, and shop storage. With a 3-3/4 inch overall length, the pull fits comfortably on small to mid-size doors and drawers, so it suits upper wall cabinets as well as base units. The zinc construction supports everyday opening and closing in busy areas, which is valuable on high-use banks of drawers. The 3/4 inch projection offers enough depth to hook fingers from above or below, giving flexibility on different cabinet heights and user reach. A 1/2 inch width keeps the hardware looking light on the face, which aligns with minimalist design schemes using flat-panel doors or simple drawer fronts.
The 3 inch center to center dimension on this HH075266-TN pull lets installers repeat the same drill pattern from door to door, which speeds layout when running a full kitchen or office bank. Because the overall length is only 3-3/4 inches, the ends of the pull sit close to the mounting holes, which helps keep each pull centered visually even on narrow fronts. The 3/4 inch projection sets a predictable stand-off from the face, so rows of doors line up with a consistent hardware depth, aiding in achieving a uniform sightline across upper and lower cabinets. The 1/2 inch width defines a slim strike line down each front, which helps multiple pulls read as a clean grid when spaced evenly. Using a toasted nickel finish from the Streamline collection means each pull shares the same color and style, supporting repeatable aesthetic results on large runs or phased upgrades. The zinc material under the finish provides a solid base, so all pulls in a project respond with a similar feel when operated.
The Hickory Hardware Streamline pull has a 3 inch center to center measurement, so mounting holes are spaced 3 inches apart on the cabinet face.
The HH075266-TN pull has an overall length of 3-3/4 inches, which keeps the handle compact while still offering a usable grip area on doors and drawers.
This Streamline series cabinet pull is made from zinc, giving a solid-feeling handle suitable for regular cabinet use in kitchens or work areas.
The toasted nickel cabinet pull projects 3/4 inch from the cabinet face, providing finger clearance while keeping a low profile on the door or drawer.
The Streamline zinc cabinet pull has a width of 1/2 inch, creating a slim, linear appearance that suits minimalist cabinet styles.
This cabinet pull is part of the Streamline collection from Hickory Hardware and uses a toasted nickel finish for a modern, understated look.
The Hickory Hardware Streamline pull with 3 inch center to center drilling, 3-3/4 inch length, and 3/4 inch projection delivers predictable dimensions that support clean cabinet layouts. The toasted nickel finish and zinc construction provide a consistent, modern look and feel across doors and drawers. Ordering this HH075266-TN pull through Wurth Baer Supply aligns decorative hardware choice with practical measurements, helping projects stay visually aligned from the first cabinet run to the last.
Sold In: 1 Each
