Hickory Hardware Midway pull is a decorative cabinet handle designed for 6-5/16 inch (160 mm) center to center drilling, so it aligns with standard hole spacing on many cabinet doors and drawers. The pull uses a Crysacrylic with Satin Nickel finish, which delivers a clear acrylic look framed by a satin nickel tone that works well in contemporary and transitional cabinetry. The body is made from zinc, providing a solid metal base under the decorative finish for dependable handling during daily use. A projection of 1-9/16 inch sets the grip comfortably off the cabinet face, giving fingers room to pull without scraping knuckles. The 13/16 inch width creates a visible but streamlined profile across the front of a cabinet, balancing presence with clean lines. With an overall length of 7 inch, the pull spans across wider drawer fronts so hardware scale looks proportional on larger faces.
This pull is specified with a 160 mm center to center dimension, so mounting holes are laid out on 160 mm centers when drilling. That metric spacing also equals 6-5/16 inch, which aligns with a common cabinet hardware pattern and simplifies layout across mixed metric and imperial shop setups. The 7 inch overall length leaves material beyond the mounting points, helping the pull visually span across door rails or drawer fronts. A projection of 1-9/16 inch spaces the grip away from the cabinet face, giving clearance for fingers when doors are recessed or when fronts sit near adjacent panels. With a width of 13/16 inch, the pull occupies a moderate strip of space on the face, helping keep narrow rails from looking crowded when multiple pulls are installed.
This Midway series cabinet hardware sits in the Decorative Hardware & Moldings category, so it is intended for visible cabinet applications where appearance and proportion matter. The 6-5/16 inch (160 mm) center to center size suits medium to large cabinet doors and drawers, so it works well on kitchen bases, tall pantry doors, or wider vanity drawers that benefit from a longer grip. The Crysacrylic with Satin Nickel finish combines clear acrylic elements with a satin nickel tone, letting the pull coordinate with other satin nickel fixtures while keeping a lighter, more open look across painted or stained fronts. Because the pull measures 7 inch in length, it creates a strong horizontal line on drawer banks, which can help visually organize a run of cabinets. The zinc material underneath the finish provides a solid feel at the touch point, which matters on frequently used doors and drawers.
The 160 mm center to center measurement gives installers a fixed reference for drilling jigs and templates, which supports repeatable hole placement across multiple fronts. Matching the 160 mm dimension to the 6-5/16 inch callout allows the same pull to be planned in either metric or imperial drawings, simplifying shop documentation. A projection of 1-9/16 inch controls how far the pull stands off the face, which helps keep knobs and pulls from clashing when doors open near walls or adjacent cabinets. The 13/16 inch width defines the strip of face the pull will cover, which guides decisions about rail widths and stile reveals so the hardware does not dominate narrow frames. An overall 7 inch length helps maintain consistent visual spacing from edge to edge when lining up pulls across a wide drawer bank. With a zinc construction carrying the Crysacrylic and Satin Nickel finish, the pull offers a unified piece that responds as a single element when fastened through the door or drawer front.
The Hickory Hardware Midway pull has a 6-5/16 inch (160 mm) center to center size, so mounting holes are spaced 160 mm apart for installation accuracy.
The P3702-CASN Midway series pull measures 7 inch in overall length, which helps it span medium to wide cabinet doors and drawer fronts proportionally.
This Belwith Keeler cabinet pull is made from zinc, giving the Crysacrylic with Satin Nickel design a solid metal base for everyday cabinet use.
The cabinet handle projects 1-9/16 inch from the surface, providing finger clearance between the pull and cabinet face when opening doors or drawers.
The Midway series Crysacrylic pull is 13/16 inch wide, so it stays relatively slim on the cabinet face while still giving a defined gripping area.
The 160mm C C cabinet pull uses a Crysacrylic with Satin Nickel finish, combining clear acrylic style with a satin nickel tone for decorative cabinet hardware.
The Hickory Hardware Midway pull with 6-5/16 inch (160 mm) center to center sizing lines up with common cabinet drilling patterns, which supports straightforward layout across new or updated fronts. Its 7 inch length, 1-9/16 inch projection, and 13/16 inch width give clear physical reference points when plotting handle placement on different cabinet sizes. With a zinc construction and Crysacrylic with Satin Nickel finish, the pull pairs structural metal with a decorative surface suited to visible locations. For projects built around 160 mm spacing and a Crysacrylic satin nickel look, this P3702-CASN pull offers a defined set of dimensions to design around.
Sold In: 1 Each
