Hickory Hardware Midway Series pull gives you a straightforward way to handle quick cabinet updates without changing the whole layout. This plastic pull in a black finish is part of the Midway Collection, designed to offer versatile pull options for get-it-done-today projects where you want a consistent look across multiple doors or drawers. The pull has a 3-3/4 inch center to center dimension, so it matches common drilling patterns and lets you swap out an old pull while keeping existing hole locations. A 4 inch overall length keeps the footprint compact, which helps on narrow drawer fronts or tight door rails. With a projection of 1-3/8 inch, this pull provides finger clearance while staying close to the surface, which is useful on cabinets near walkways or neighboring doors. A width of 3/8 inch keeps the profile slim for a clean, simple line on the face.
This Belwith Keeler pull with manufacturer part number P867-BL is specified at 96mm center to center, which corresponds to the 3-3/4 inch drilling size noted for the Midway Series pull. That dimensional match means the pull is sized for common metric and imperial cabinet layouts, so it fits many pre-bored fronts that follow 96mm lines. The 4 inch length concentrates the mounting points close to the ends, which works well when you are lining up on existing flat rails. With a projection of 1-3/8 inch, the grip clears typical door edge profiles while holding the hand in close, which helps keep opening forces near the fasteners for consistent feel. The slim 3/8 inch width puts more bearing on the fastener line than on a wide face, which supports a controlled, centered pull motion.
The Hickory Hardware Midway Series 3-3/4 inch center to center pull is suited to cabinet and drawer fronts that already use the 96mm or 3-3/4 inch drilling pattern, because its mounting holes align directly to that spacing. The compact 4 inch body length fits comfortably on narrow drawer fronts and face-frame rails, keeping the ends of the pull within the flat area and away from profiled edges. A projection of 1-3/8 inch provides room to get fingertips behind the pull on standard overlay doors, which helps when opening heavier drawers that still use this compact size. The black finish coordinates with other dark elements such as hinges or appliances, which can be important when aligning multiple hardware components in kitchens, baths, or shop cabinetry using Midway Collection pieces.
The 3-3/4 inch center to center dimension on the P867-BL pull gives installers a consistent reference that matches a widely used drilling standard, which reduces layout time when repeating the same pull across a bank of cabinets. At 96mm center to center, the pull works with metric templates and jigs, which streamlines boring operations in shops that run both imperial and metric setups. The 4 inch overall length leaves only a small extension beyond the mounting centers, which helps position the pull precisely over flat sections of the rail and improves appearance consistency from door to door. A 1-3/8 inch projection balances clearance and compactness, so doors can open without knuckles contacting the surface while neighboring doors stay clear of the grip area. The plastic material keeps each pull light, which places the primary load on the connection points rather than adding unnecessary weight to the moving front. The black finish provides a uniform, non-reflective appearance that hides minor handling marks during installation and helps maintain a steady look across long cabinet runs.
The Hickory Hardware Midway Series pull uses a 3-3/4 inch, or 96mm, center to center drilling pattern, which matches many standard cabinet layouts for straightforward replacement or new installs.
The P867-BL pull has a 4 inch overall length, so it stays compact on narrow drawer fronts while still spanning the 3-3/4 inch mounting centers.
The P867-BL pull has a 1-3/8 inch projection, giving practical finger clearance behind the pull while keeping it close to the cabinet face for a tighter profile.
This Midway Collection pull is made from plastic with a black finish, providing a dark, uniform appearance that coordinates with other black decorative hardware.
The P867-BL pull is a Belwith Keeler product in the Hickory Hardware Midway Collection, tying it to a defined decorative hardware family.
This item is classified under decorative hardware and moldings as a handle and pull, so it serves as a primary gripping point on cabinet doors or drawers.
The Hickory Hardware Midway Series 3-3/4 inch center to center black pull combines a 96mm drilling pattern, 4 inch length, and 1-3/8 inch projection to match common cabinet layouts without reworking fronts. The slim 3/8 inch width and plastic construction contribute to a compact, lightweight grip that suits both doors and drawers in the same project. With its black finish and defined Midway Collection identity, this Belwith Keeler P867-BL pull lets you keep hardware consistent wherever that drilling pattern is already in place. When planning your next cabinet run or replacement job, match your hole spacing to this pull and use it as the standard across the installation.
Sold In: 1 Each
