Crysacrylic with Chrome pull from the Midway collection gives cabinet doors and drawers a clear acrylic look over a chrome finish, so the hardware reads clean and modern while still matching common chrome fixtures in a shop or kitchen. The pull uses a 7-9/16 inch (192 mm) center to center mounting, which lines up with standard drill patterns on many longer cabinet faces and drawer fronts for straightforward layout on new work or retrofits. Overall length is 8-1/4 inch, so the handle visually spans wider drawer fronts without feeling oversized on tall doors. A projection of 1-9/16 inch stands the grip off the face just enough for a solid handhold with work gloves or wet hands, while the 3/4 inch width keeps the profile slim for tight runs of doors. Zinc material under the finish provides a solid base that supports everyday cabinet use.
The 192 mm center to center measurement defines exactly where to bore the two mounting holes, so installers can set up drilling jigs once and repeat the pattern across a full run of cabinets. Because the overall length is 8-1/4 inch, the pull extends slightly beyond the hole spacing at each end, which helps cover minor layout variations or pencil marks around the bore points. The 1-9/16 inch projection keeps the hand clear of the cabinet face, so installers do not have to offset doors or drawers to gain knuckle room. With a 3/4 inch width, the footprint on the face is controlled, which helps when aligning pulls on narrow rails or inset fronts.
The Hickory Hardware Midway Series 7-9/16 inch (192 mm) center to center pull fits cabinets or casework that call for longer handles, such as wide kitchen drawers or tall pantry doors, because the 8-1/4 inch length visually balances larger fronts. The Crysacrylic with Chrome finish pairs the clarity of acrylic with a chrome appearance, which helps tie together chrome hinges, faucets, and other bright cabinet hardware in the same installation. Belwith Keeler branding places this pull within a decorative hardware and moldings family, so it suits projects where the handle is part of a coordinated hardware selection. As a handle and pull within that category, it supports both residential cabinetry and woodworking projects that need a finished, decorative grip.
The 192 mm center to center layout allows installers to standardize on a single drill pattern for multiple cabinets, which reduces layout time and keeps handle heights and spacing aligned across an entire wall of casework. The 1-9/16 inch projection means the gripping area is predictable, helping users open doors and drawers without dragging fingers along finished faces, which can limit wear on coatings over time. With a 3/4 inch width, the pull keeps its contact area compact, making it easier to align edges to cabinet rails or stiles by eye during installation for a straight run. The zinc material gives the pull a stable feel when fastened to the cabinet, supporting repeated opening and closing in everyday use on kitchen, bath, or shop cabinetry.
The Hickory Hardware Midway Series pull has a 7-9/16 inch (192 mm) center to center, so hole spacing matches that dimension for drilling and layout.
The Belwith Keeler P3703-CACH pull measures 8-1/4 inch in overall length, giving coverage that suits wider cabinet drawers and taller doors.
The pull uses zinc material with a Crysacrylic with Chrome finish, combining a solid base with a clear acrylic and chrome look for decorative cabinet work.
The Midway collection pull projects 1-9/16 inch from the cabinet face, creating comfortable finger clearance while opening doors and drawers.
The Crysacrylic with Chrome pull is 3/4 inch wide, giving a slim profile that works on narrow rails or close-set cabinet doors.
This 192 mm center to center cabinet pull is manufactured by Belwith Keeler in the Hickory Hardware Midway Series for decorative cabinet installations.
The Hickory Hardware Midway Series 7-9/16 inch (192 mm) center to center pull pairs zinc construction with a Crysacrylic with Chrome finish, giving cabinets a clear acrylic look over a chrome tone. For runs of wider drawers, tall doors, or coordinated decorative hardware layouts, its 8-1/4 inch overall length, 1-9/16 inch projection, and 3/4 inch width provide a predictable footprint that supports consistent drilling and alignment across a project.
Sold In: 1 Each
