Hickory Hardware Midway pull is a 7-9/16 inch (192 mm) center to center cabinet pull from the Midway collection, so it suits projects where consistent sizing and a defined series look matter across multiple doors and drawers. The pull uses a Crysacrylic with Satin Nickel finish, which gives a clear acrylic-style visual with metal accents that match satin nickel hinges or latches in the same run. The material base is zinc, giving the pull a solid metal core that supports everyday cabinet use in kitchens, baths, or built-ins. Overall length is 8-1/4 inches, which provides extended hand clearance across wider drawer fronts. Projection is 1-9/16 inches, so fingers can wrap comfortably without contacting the door face. The 13/16 inch width offers a stable grip surface that feels secure when opening heavier drawer boxes.
The 192 mm (7-9/16 inch) center to center dimension on this Hickory Hardware Midway series pull defines the exact hole spacing, which lets installers set up drilling jigs or templates one time for an entire job. With an overall length of 8-1/4 inches, the pull overhangs the drilled points slightly, which can visually cover minor chip-out around the bore area. The 1-9/16 inch projection establishes stand-off from the door or drawer front, so the pull clears raised profiles or light edge details. At 13/16 inch wide, the pull footprint fits comfortably on standard stile widths, which gives layout flexibility on both narrow doors and wider drawer fronts.
This Hickory Hardware Midway series 7-9/16 inch center to center pull fits projects calling for a coordinated line of cabinet hardware, because the Midway collection name ties it to matching pieces on the same job. The 192 mm drilling dimension works well on larger cabinet doors and drawers, giving a substantial grasp point on base cabinets or tall pantry fronts. An 8-1/4 inch overall length creates a strong visual line on face-frame or frameless cabinetry, aligning neatly with longer drawer boxes found in kitchens or work areas. The Crysacrylic with Satin Nickel finish suits spaces that already use satin nickel hinges or pulls, helping maintain a consistent metal tone on all exposed hardware. Because the pull is built from zinc, it suits installations where a metal-core handle is preferred on frequently used cabinet runs.
The defined 7-9/16 inch (192 mm) center to center spacing on the P3703-CASN pull supports repeatable drilling, which reduces layout time when hardware must line up perfectly across multiple fronts. A projection of 1-9/16 inches gives users space to pull from different angles, which matters on base cabinets near corners where hand approach can be awkward. The 13/16 inch width provides a generous gripping edge, helping users get a solid hold even when hands are damp in kitchen or bath environments. The 8-1/4 inch overall length helps align pulls horizontally, which simplifies visual alignment with adjacent doors or appliances. The Crysacrylic with Satin Nickel finish keeps the acrylic-look portion visually light while the satin nickel areas coordinate with common hinge and latch finishes, simplifying hardware selection for cohesive design. The zinc material base supports daily open-and-close cycles, so the pull maintains its role on doors and drawers that see frequent traffic.
The Hickory Hardware Midway pull has a 7-9/16 inch (192 mm) center to center size, which sets consistent hole spacing for drilling jigs and layout across multiple cabinet fronts.
The pull length is 8-1/4 inches, so it spans a good portion of wider drawers or doors and helps create a balanced, linear look across a cabinet run.
The P3703-CASN pull is made from zinc, giving it a metal core that stands up to repeated cabinet use in kitchens, baths, or workspaces.
The pull projection is 1-9/16 inches, creating hand clearance from the door or drawer surface and reducing knuckle contact during opening.
The pull has a Crysacrylic with Satin Nickel finish, combining a clear acrylic-style look with satin nickel accents that coordinate with similar cabinet hardware.
The P3703-CASN pull belongs to the Midway collection, allowing it to align visually with other Midway series pieces on the same project.
The Hickory Hardware Midway series 7-9/16 inch (192 mm) center to center Crysacrylic with Satin Nickel pull, P3703-CASN, pairs a zinc core with an 8-1/4 inch length, 1-9/16 inch projection, and 13/16 inch width. Those dimensions provide predictable drilling, comfortable hand clearance, and a balanced look across doors and drawers. For cabinet runs that call for a Midway collection pull with a Crysacrylic with Satin Nickel finish and 192 mm center to center sizing, this model offers a defined, repeatable choice.
Sold In: 1 Each
