Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Bungalow Series zinc die cast pulls bring a rectangular profile with beveled edges that supports straight-line cabinet layouts in contemporary spaces. The pulls are made from zinc die cast material, which provides a solid metal feel for everyday cabinet or drawer use. The oil rubbed bronze finish creates a dark, uniform surface that visually anchors lighter cabinet faces and defines handle locations clearly. The pull length of 5-5/8 inches gives a substantial hand grip across wider drawer fronts, helping hands find the center of the front consistently. A projection of 1 inch sets the gripping surface off the door or drawer face, leaving room behind fingers during opening. The 1-1/16 inch width presents a broad front edge that is easy to grab from different approach angles on doors or drawers in busy work areas.
The Bungalow pull offers 3 inch and 3-3/4 inch center-to-center mounting, giving two hole-spacing options in the same handle body for cabinet layouts that mix standard and metric drilling patterns. This dual 3 inch and 96mm center-to-center capability allows alignment with many existing hole runs on face frames or drawer fronts while keeping a consistent visual style. The combined sizing helps when handling remodel work where some fronts were drilled on 3 inch centers and others at 96mm, because a single pull style can address both patterns. Using one pull model across these two common spacings helps maintain uniform sightlines along rows of doors and drawers in kitchens, baths, or shop storage.
The Bungalow Series zinc die cast pulls from Belwith Keeler sit in the decorative hardware and moldings category under handles and pulls, positioning them for cabinet and drawer fronts in woodworking projects. Their rectangular design with beveled edges pairs naturally with straight cabinet lines, so they support face-frame or frameless layouts that emphasize linear geometry. The oil rubbed bronze finish suits projects where a darker pull defines the hardware line across upper and lower runs, tying together doors and drawers under consistent color. Because the length is 5-5/8 inches, these pulls cover a noticeable span on wider drawer fronts, which can visually balance the proportions of tall or deep drawers. In smaller fronts, that same length creates a focal point that reads clearly against narrow rails and styles.
The dual 3 inch and 3-3/4 inch center-to-center setup fits work where some fronts are drilled on traditional 3 inch measurements while others use 96mm spacing, so Bungalow pulls can support mixed drilling standards inside a single job. The 1 inch projection defines a consistent standoff from the cabinet surface, which helps doors and drawers open without knuckles dragging along the face when users grip quickly from above or below. The 1-1/16 inch width offers enough surface to catch light along the front edge, making the pull line visible even in lower ambient lighting. The zinc die cast material supports a uniform casting of the beveled rectangular form, so each pull presents the same profile and edges along long cabinet runs.
The Bungalow pull supports 3 inch and 3-3/4 inch center-to-center mounting, so it works with layouts drilled on either standard inch spacing or 96mm metric spacing across cabinet fronts.
The Bungalow pull length is 5-5/8 inches, giving a generous gripping span that helps distribute pull force across wider doors or drawers in kitchen or shop installations.
The Bungalow pull is made from zinc die cast material, providing a solid metal body that supports consistent shape and feel across multiple pulls on the same project.
The Bungalow pull has a 1 inch projection, setting the handle off the cabinet face so fingers can fit behind the pull comfortably during regular opening and closing.
The Bungalow pull width is 1-1/16 inches, creating a broad front edge that is easy to grasp from different angles on both cabinet doors and drawer fronts.
The P2153-10B Bungalow cabinet pull is manufactured by Belwith Keeler, placing it within their decorative handles and pulls line for cabinet applications.
The Bungalow Series zinc die cast pulls with 3 inch and 3-3/4 inch center-to-center mounting give one handle solution for straight-line cabinet designs using mixed drilling patterns. The oil rubbed bronze finish and 5-5/8 inch length establish a consistent visual band across doors and drawers, while the 1 inch projection and 1-1/16 inch width support a comfortable grip in regular service. For cabinet, drawer, or woodworking projects benefiting from rectangular pulls that match contemporary, straight-edged layouts, this Belwith Keeler model P2153-10B offers the verified dimensions and finish needed to align hardware across the run.
Sold In: 1 Each
