Hickory Hardware Wire Pull 4" (102 mm) Center to Center, White, PW355-24

Hickory Hardware Wire Pulls 4 Inch Center Use

Hickory Hardware Wire Pulls 4 inch center to center describes a steel cabinet pull from the Wire Pulls collection that provides a simple, consistent grip point across doors and drawers. The 4 inch center to center drilling matches the specified cabinet hole spacing, which helps maintain alignment across a run of fronts. The pull length of 4-5/16 inch gives a bit of overhang beyond the mounting holes, which leaves finger space at each end for a comfortable grab. A projection of 1-1/4 inch sets the hand off the cabinet face, which reduces knuckle contact on thicker fronts. The 5/16 inch width keeps the profile slim, which is useful where fronts sit close together. A white finish presents a clean, neutral look that ties into white or light cabinetry. The steel material provides a solid-feeling pull point for repeated opening and closing in everyday use.

Key Details Of This PW355-24 White Pull

• The Wire Pulls collection designation ties this handle to a consistent series look, which helps match existing Hickory Hardware installations or plan a coordinated layout across multiple cabinets.
• The steel material construction creates a rigid pull body, which supports firm opening force on heavier cabinet doors or loaded drawers without flexing under normal use.
• The specified white finish defines the visual appearance, which helps this pull blend into white cabinet faces or stand out slightly on contrasting surfaces for clear grab locations.
• The 4-5/16 inch overall length provides extended grip space, which allows users to grasp the pull from various angles while still aligning with the 4 inch mounting centers.
• The 1-1/4 inch projection dimension sets how far the pull stands off the surface, which gives enough clearance for fingers between the pull and the cabinet face in regular operation.
• The 5/16 inch width defines a narrow front profile, which is useful where clearance between adjacent fronts is tight or where a low-visual-mass handle is preferred.

4 Inch Center To Center Pull Fit Details

The 4 inch center to center measurement on this PW355-24 white cabinet pull dictates the distance between mounting holes, which directly affects where it can be mounted on a door or drawer front. Matching this 4 inch layout to existing drilling allows direct replacement of older pulls without altering the front. The 4-5/16 inch overall length keeps the ends close to the hole pattern, which is helpful when working within rail or stile boundaries. The 1-1/4 inch projection controls how far the pull extends into the room, which matters on doors that open near walls or adjacent cabinets. The 5/16 inch width establishes a slim contact surface, which can reduce visual clutter on small drawer fronts while still giving enough metal to grip securely.

Using The Belwith Keeler PW355-24 In Projects

Where This Steel White Cabinet Pull Works

The Belwith Keeler PW355-24 white pull, from the Wire Pulls collection, fits cabinet applications that are drilled for a 4 inch center to center handle, because its mounting layout matches that pattern. The 4-5/16 inch overall length suits medium-width doors and drawers, where a compact handle still needs enough span for an easy grab. The steel construction supports use on frequently accessed fronts, such as kitchen or shop cabinets, because the rigid body handles repeated pulling forces. The white finish coordinates with light-colored casework, which is common in residential kitchens, baths, or workrooms that use bright cabinet schemes. The 5/16 inch width keeps the pull visually light, which is useful on narrow drawer fronts or tight grid layouts where a bulkier handle might dominate the face. The 1-1/4 inch projection provides clearance over typical door and drawer edge profiles, which matters when fingers wrap behind the bar to pull.

Details That Support Consistent Cabinet Results

The 4 inch center to center dimension on this Hickory Hardware PW355-24 handle standardizes the drilling pattern, which promotes consistent alignment across a bank of cabinets. The 4-5/16 inch overall length positions the grip bar just beyond the mounting points, which keeps the pull properly centered while still respecting stile and rail borders. The 1-1/4 inch projection defines a predictable stand-off distance, which helps maintain a uniform reveal when cabinet fronts are installed close to walls or appliances. The 5/16 inch width yields a slender bar profile, which can help maintain even spacing between handles when installed in tight arrays. The white finish provides a uniform color field along the run, which keeps visual lines clean where multiple pulls are installed in rows or columns. The steel material under that finish gives each pull a consistent weight and feel, which contributes to a uniform opening experience across all doors and drawers using this model.

Common Questions About This Wire Pulls Handle

Selecting This 4 Inch Center White Pull

The Hickory Hardware Wire Pulls 4 inch center to center design, in the PW355-24 white finish, gives you a steel handle sized for 4 inch drilling with a 4-5/16 inch overall length. The 1-1/4 inch projection and 5/16 inch width define how it feels in the hand and how it sits on the cabinet face. When a project calls for a white, steel pull that follows a consistent Wire Pulls collection style and matches a 4 inch center to center pattern, this model offers the dimensions needed for aligned, repeatable cabinet work.