Tiomos flap hinge from Grass America is a 90 degree opening hinge designed for flap applications where controlled travel is critical. The hinge is specified for flap thickness of up to 30 mm, so it supports thicker fronts often used in modern casework. Its sleek modern design aligns with contemporary cabinetry, which helps projects stay consistent from exterior appearance through internal hardware. As a flap hinge within the Grass Kinvaro lift systems family, it fits into projects built around coordinated lift and stay solutions. The nickel-plated finish gives the hinge a uniform metal surface, which supports a professional look at exposed or semi-exposed mounting positions. With this purpose-built hinge, flap fronts move in a defined 90 degree arc, which matters anywhere clearances, adjacent surfaces, or user access are planned around a fixed stop.
This Tiomos flap hinge offers 3-dimensional adjustment, so the installed flap can be aligned in height, depth, and side-to-side position. That three-axis tuning capability allows the installer to correct small drilling or placement variations while the cabinet is assembled, which is important for tight reveal lines. The hinge provides a narrow joint, so the gap between the flap and cabinet can be kept small while still allowing free movement through the 90 degree opening. A large overlay of up to 19 mm lets the front overlap the cabinet side or frame significantly, which helps when designing fronts that visually cover the structure while still operating smoothly on the hinge geometry.
The Tiomos flap hinge is specified for flap applications within the Grass Kinvaro lift systems category, which positions it for work surface, table, or cabinet fronts that pivot upward or outward. Its 90 degree opening angle defines how far the flap travels, which matters in upper cabinets, lift-up fronts, or work-surface covers where the opening path passes nearby walls, ceilings, or adjacent cabinets. The ability to handle flap thickness of up to 30 mm means it suits projects using thicker panel stock or applied fronts within that range, so designers can choose materials for visual or structural reasons without leaving the Tiomos concept. A narrow joint helps these flaps sit with tight reveals, which visually ties multiple fronts together across a bank of cabinets while preserving the motion defined by the hinge.
The large overlay of up to 19 mm allows the flap to extend over the cabinet side or face, which supports full-overlay styling often used with contemporary Grass America hardware. In projects using Kinvaro D-M or D-S flap systems, this hinge functions as the articulation point for the front while the lift system manages the motion support, so the two components work together as one functional assembly. Compatibility with the Tipmatic pin system connects the hinge movement to push-based opening in handleless layouts, so the same hinge supports both aesthetic and operational goals. With 3-dimensional adjustment, the hinge provides the fine-tuning needed to dial in narrow joints, correct for construction tolerances, and keep the 90 degree stop consistent across multiple flap fronts in a run.
The Tiomos flap hinge provides a 90 degree opening angle, which sets a defined stop for the flap and helps keep swing clearance and access consistent across similar cabinet or work-surface fronts.
The Tiomos flap hinge is specified for flap thickness of up to 30 mm, so it supports thicker fronts within that dimension range used in modern cabinetry or work-surface applications.
The Tiomos flap hinge uses 3-dimensional adjustment, allowing height, depth, and lateral tuning so installers can align the flap for narrow joints and even reveals after the hinge is mounted.
The Grass Tiomos flap hinge supports a large overlay of up to 19 mm, allowing the flap front to cover more of the cabinet side or face for full-overlay design layouts.
The Tiomos flap hinge is designed for a narrow joint, which supports tight gaps between the flap and cabinet, helping achieve clean, modern visual lines across adjoining fronts.
The Tiomos flap hinge is compatible with Kinvaro D-M and D-S flap systems and with the Tipmatic pin system, so it integrates with those Grass motion and opening concepts.
The Tiomos flap hinge from Grass America combines a 90 degree opening angle, 3-dimensional adjustment, narrow joint, and large overlay capacity, making it a focused choice for flap fronts within its 30 mm thickness range. Its compatibility with Kinvaro D-M and D-S flap systems, along with the Tipmatic pin system, positions it for coordinated lift and handleless projects using Grass hardware. For flap layouts planned around defined stops, tight reveals, and full-overlay styling, this hinge aligns the hardware function with the design intent.
Sold In: 1 Each