Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Tiomos flap hinge 90 degree opening is a Grass America hinge designed to open flap-fronts to a defined 90 degree angle, which helps keep work surfaces and cabinet fronts aligned with surrounding components. The hinge is specified for flap thickness of 14-21mm, so it targets typical thicker fronts used on modern lift systems where stability and edge strength are important. A sleek modern design supports contemporary cabinet layouts, which matters when exposed hinges sit at eye level on upper units or work surfaces. The hinge color is described as Night, which coordinates with dark cabinet hardware runs to keep hardware visually consistent on a project. Because this hinge belongs to the Tiomos family, it fits into installations where installers already rely on Tiomos geometry and performance for flap-style cabinet fronts and lift applications.
This Tiomos T12 flap hinge in Night is built as a screw-on hinge, so mounting relies on using screws through the hinge pattern into the flap and cabinet structure, which fits standard shop workflows using drills and drivers. The 3-dimensional adjustment feature means the installed hinge can be shifted in three directions on its mounts, which lets the installer dial in precise gaps, overlay, and flushness without relocating holes. The narrow joint characteristic keeps the running gap between the flap and cabinet tight, so accurate installation yields a clean, continuous look along a bank of upper cabinets or work surfaces. With an opening angle of 90 degrees, layout planning can assume a fixed open position, which simplifies planning for clearances to ceilings, shelves, or adjacent cabinets.
The Tiomos T12 flap hinge is described for flap thickness of 14-21mm, so it suits flap fronts made from common panel stock and thicker decorative fronts used in contemporary kitchens and work areas, giving installers a hinge matched to those dimensions. A large overlay of up to 19mm lets this hinge serve frameless cabinets or overlay applications where the front needs to cover more of the cabinet side, which is valuable in modern designs that minimize visible cabinet edges. Compatibility with the Kinvaro D-M/D-S flap system aligns this hinge with Grass lift mechanisms, so it can be used in upper cabinets or lift-up fronts that rely on those systems for controlled movement. The Night finish aligns visually with darker interior hardware and fittings, which is significant when hinge arms are visible behind open flap fronts or through glass.
The 3-dimensional adjustment provided on this Tiomos flap hinge lets installers correct misalignment by moving the flap up-down, left-right, and in-out relative to the cabinet, which reduces rework by allowing fine tuning after fastening. The narrow joint behavior helps maintain consistent reveals when several flap fronts run side by side, so even small adjustment changes translate into a clean, uniform cabinet line. A defined 90 degree opening angle ensures each flap stops at the same angle, which keeps work areas predictable and helps coordinate clearances with Kinvaro D-M/D-S flap systems in multi-front runs. Because the hinge supports an overlay of up to 19mm, it gives flexibility to match overlays specified on surrounding doors and fronts, helping installers achieve consistent visual alignment across different cabinet types using the same design language.
This Tiomos flap hinge provides a 90 degree opening angle, which sets a precise open position that simplifies planning clearances to ceilings, shelves, and nearby cabinet fronts.
This hinge is specified for flap thickness of 14-21mm, so it suits fronts built from common thicker panels used in upper cabinets and lift systems requiring that thickness range.
The Tiomos flap hinge allows a large overlay of up to 19mm, letting front panels cover more of the cabinet side for overlay and frameless constructions.
This Tiomos hinge offers 3-dimensional adjustment, so the mounted flap can be shifted in three directions to align reveals and flushness after installation.
The hinge is described as screw-on, indicating it is fastened to the flap and cabinet with screws, fitting standard shop drilling and driving processes.
This Tiomos flap hinge is compatible with the Tipmatic pin system and with the Grass Kinvaro D-M/D-S flap system, so it integrates into those lift and push-to-open setups.
The Tiomos T12 flap hinge, Night finish, combines a 90 degree opening angle, support for 14-21mm flap thickness, a large overlay up to 19mm, and 3-dimensional adjustment, giving installers a hinge tailored to Kinvaro D-M/D-S and Tipmatic-based flap projects. For cabinet runs using Grass America hardware where controlled flap movement, tight joints, and coordinated dark hardware are priorities, this hinge aligns with those requirements and supports consistent results across multiple openings.
Sold In: 1 Each