Tiomos flap hinge gives a 90 degree opening angle, so a lift flap can open to a predictable right angle that keeps the front positioned cleanly for worktops or upper cabinets. The hinge is designed for flap thickness of up to 30 mm (1-3/16 inch), allowing use on thicker modern fronts often used in contemporary cabinetry. Its sleek modern design keeps visible hardware lines minimal, which helps finished installations match streamlined furniture and kitchen layouts. The hinge is a screw-on style, so it fastens directly to the flap and cabinet with screw mounting, supporting straightforward layout in the shop. Grass America branding and the Tiomos name identify it as part of the Grass Kinvaro lift system family, giving installers a defined product line when planning flap projects.
This Tiomos T17 flap hinge uses a screw-on configuration, so it mounts by driving screws through the hinge plates into the cabinet and flap structure. That mounting style supports clear, repeatable hole patterns for production or small-batch jobs. With three-dimensional adjustment, the hinge can be shifted in three directions after mounting, which helps installers dial in overlay and joint lines without re-drilling. The 90 degree opening angle limits travel, reducing the need for separate stops when a right-angle position suits the project. Because the design is intended for flap thickness up to 30 mm (1-3/16 inch), layouts can be based around that material range from the start.
The Tiomos flap hinge is part of the Lid Supports and Stays product class, so it is intended for use on lift or flap fronts rather than traditional swinging doors. Placement with a 90 degree opening angle means it suits situations where the flap is meant to open upward to a fixed right angle, common in work surface cabinets, overhead units, or lift fronts over appliances. Its large overlay of up to 19 mm (3/4 inch) lets the flap front cover more of the cabinet face, which is useful when designers want clean, full-overlay styling across a bank of units. Because the hinge is compatible with Kinvaro D-M/D-S flap system, it is designed to work within those lift mechanisms, giving a defined hinge option when that system is specified. The narrow joint feature supports tight visual gaps around the flap, helping maintain a consistent reveal with adjacent doors or panels in a coordinated installation.
The three-dimensional adjustment on this Grass America flap hinge allows the flap to be moved in height, side, and depth relative to the cabinet, which lets installers correct minor drilling tolerances and still achieve sharp joint lines. Its screw-on mounting style simplifies adjustments because the hinge can be repositioned or replaced using the same general mounting area, reducing disruption to finished cabinetry. Compatibility with the Tipmatic pin system connects the hinge to mechanical push-to-open functionality, so designers can specify handle-free fronts while still using this same hinge body. Because it also works with the Kinvaro D-M/D-S flap system, hinge geometry is aligned for those lift mechanisms, helping the motion of the flap stay controlled throughout opening and closing. The specified flap thickness range up to 30 mm (1-3/16 inch) and overlay up to 19 mm (3/4 inch) give clear planning limits, which supports repeatable shop drawings and CNC programming when building multiple units.
The Tiomos flap hinge provides a 90 degree opening angle, which sets a defined stop for the flap and helps keep clearances consistent over counters, equipment, or adjacent cabinets.
This hinge is designed for flap thickness of up to 30 mm (1-3/16 inch), allowing use on thicker modern cabinet fronts while staying within the intended operating range.
The hinge allows a large overlay of up to 19 mm (3/4 inch), so the flap can cover more of the cabinet face and create a full-overlay look across the installation.
Three-dimensional adjustment on the hinge lets installers fine-tune height, side, and depth, which helps achieve precise reveals and overlay without changing drilling patterns.
The Tiomos flap hinge is compatible with Kinvaro D-M/D-S flap system, so it can be used as the hinge component within those specified lift mechanisms.
Compatibility with the Tipmatic pin system allows this hinge to work with mechanical push-to-open setups, supporting handle-free flap fronts in modern cabinet designs.
The Tiomos T17 flap hinge from Grass America combines a 90 degree opening angle, flap thickness capacity up to 30 mm (1-3/16 inch), and overlay up to 19 mm (3/4 inch), giving clear working parameters for lift-front projects. Its narrow joint and sleek modern design support clean visual lines, while three-dimensional adjustment helps align fronts quickly on site or in the shop. With screw-on mounting plus compatibility with Tipmatic pin system and Kinvaro D-M/D-S flap system, this hinge fits into established Grass lift solutions. Select this hinge when you need controlled flap motion and straightforward adjustment within those specifications.
Sold In: 1 Each