Tiomos flap hinge gives a 90 degree opening angle, so flap fronts open to a defined position that helps keep work areas predictable when designing lift-up or drop-down surfaces. The hinge is specified for flap thickness of up to 30 mm, which supports use on thicker fronts where strength and visual presence are desired in work surface or cabinet applications. Its nickel-plated finish provides a hard, smooth surface that handles regular operation while matching other nickel-finished functional hardware in the assembly. The hinge is part of the Tiomos T17 flap hinge family, giving installers a recognizable adjustment layout when working across multiple Grass America projects. The design is described as sleek and modern, which supports clean-looking installations where visible hardware needs to coordinate with contemporary cabinet lines.
This Tiomos T17 flap hinge uses a screw-on mounting style, so the hinge fastens directly to the flap and cabinet with screws for a secure mechanical connection. Screw-on attachment gives installers flexibility to position the hinge precisely for the required overlay and joint, which is especially important when working with thicker flaps up to 30 mm. The hinge provides three-dimensional adjustment, allowing installers to shift the flap front vertically, horizontally, and in depth relative to the cabinet, so reveals and overlays can be tuned without relocating mounting points. With a defined 90 degree opening angle, the installed hinge creates a repeatable open position that ties in cleanly with associated lift or stay systems.
This Tiomos flap hinge is listed under lid supports and stays within Grass Kinvaro lift systems, positioning it for use on flaps that work together with Kinvaro mechanisms in work surfaces and table-related applications. Compatibility with the Kinvaro D-M/D-S flap system means the hinge is designed to operate in combination with those specific Grass lift systems, so the flap motion, opening angle, and stop position coordinate with the lift arms. The hinge is also compatible with the Tipmatic pin system, so it can be paired with that system where a mechanical opening function is desired in the overall cabinet or flap design. Because it supports flaps up to 30 mm thick, it suits installations where heavier or thicker fronts are part of the concept, such as robust work surfaces or substantial upper-front panels.
The large overlay of up to 19 mm (3/4") lets the flap front cover more of the cabinet face, which provides design flexibility when aligning with adjacent doors or panels that also use overlays. Installers can use the three-dimensional adjustment to shift the flap front until the narrow joint is even across the opening, which helps achieve tight, consistent gaps along both vertical and horizontal edges. The 90 degree opening angle works in tandem with Kinvaro D-M/D-S flap systems, so the flap stops at a position that suits the geometry of the lift hardware without additional limiting devices. When combined with the Tipmatic pin system, the defined opening and adjustable overlay help keep contact points and clearances predictable, which matters in repeated use. Working with a nickel-plated Tiomos hinge also gives fabrication shops a familiar hinge platform when standardizing adjustment processes across multiple Grass America hardware setups.
The Tiomos flap hinge provides a 90 degree opening angle, which gives a defined open position that coordinates well with flap lift systems and protects the front from over-opening.
The hinge is intended for flap thickness of up to 30 mm, so it can be used on thicker fronts where a more substantial panel is part of the cabinet or work surface design.
The hinge offers 3-dimensional adjustment, allowing height, side, and depth tuning so installers can refine overlay, joint width, and alignment without remounting components.
The Tiomos flap hinge allows a large overlay of up to 19 mm (3/4 inch), helping the flap front cover more of the cabinet face for cleaner lines and concealed edges.
The hinge uses a screw-on mounting style, so it secures directly with screws, providing a solid, mechanical connection suitable for thicker flaps up to 30 mm.
The hinge is compatible with the Tipmatic pin system and the Kinvaro D-M/D-S flap system, enabling coordinated motion and opening behavior with those Grass components.
The Tiomos flap hinge from Grass America combines a 90 degree opening angle, support for flap thickness up to 30 mm, a large overlay of up to 19 mm, and three-dimensional adjustment in a nickel-plated, screw-on design. For projects using Kinvaro D-M/D-S or Tipmatic pin systems, this hinge offers a matching functional component that aligns flap motion, overlay, and visual gaps across the installation. Select this Tiomos flap hinge when a defined opening stop, generous overlay, and precise adjustment are required on flap fronts within Grass-based lift and stay assemblies.
Sold In: 1 Each