Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Blum CLIP top hinge opens to 155 degrees and mounts without tools via INSERTA, bringing BLUMOTION soft-close to half overlay doors on face-frame and frameless cabinets. The zero-protrusion arm stays flush with the cabinet interior when the door is open.
A standard 110 degree hinge leaves the arm jutting into the cabinet when the door stands open. At 155 degrees, this hinge swings the door nearly parallel to the cabinet side, and the zero-protrusion geometry keeps the arm from cutting into usable shelf space. That combination suits cabinets where full interior reach matters: pull-out storage, appliance garages, display cases, and wall cabinets positioned above a countertop where reaching in at an angle is awkward. The half crank arm sets the door at a half overlay, the geometry two adjacent doors use when they share a single center partition. The 35mm cup bores into the door back, and the arm connects to a Blum base plate mounted to the cabinet, sold separately.
The hinge is steel with a nickel finish, a neutral tone that coordinates with brushed stainless pulls, polished chrome, and most other cool-metal hardware families. Three-way adjustment handles the settle that comes with any new installation: side and height cams bring adjacent doors back to an even reveal, and depth adjustment corrects a door face that sits proud or recessed. BLUMOTION earns its place on a wide-angle hinge because a door swinging open this far builds momentum, and the soft-close damper absorbs it on the way back in.
Reach for this hinge when the design calls for partial-overlay doors that need to open well beyond the standard swing. It works on both frameless boxes and face-frame cabinets, so it fits production runs and custom casework equally. INSERTA mounting requires the cabinet side to have pre-drilled 5mm system holes at the standard spacing. For boxes without those holes, the screw-on plate version is the right alternative. For doors where a full overlay arm suits the layout rather than a half crank, there is a full overlay variant in this series. Paired with matching Blum plates, this hinge is a reliable choice for kitchen remodelers, cabinet shops specifying wide-opening wall cabinets, and designers fitting display or media cabinets where unobstructed interior access is part of the brief.
At wide opening angles, a standard hinge arm sticks into the cabinet interior, which can block shelves or pull-outs. The zero-protrusion arm folds flush with the cabinet side so the full interior width stays clear when the door is open.
No. This hinge mounts to a separate Blum base plate that is sold separately. Use a Blum plate matched to your cabinet construction. Plates from other brands will not connect to this hinge.
Yes. INSERTA plates press into pre-drilled 5mm system holes in the cabinet side. If your cabinet does not have those holes, use a screw-on Blum plate instead.
Half overlay means the door covers part of the cabinet side rather than nearly all of it. When two doors share a single center partition, each door uses a half overlay hinge so the doors meet cleanly without the arms colliding behind them.
Specify this hinge when wide-opening half overlay doors need to stay out of the way and close without a slam, on face-frame or frameless cabinets ready for INSERTA mounting.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  BP970A1002 Mfr# 970A1002 | BLUMOTION Soft-Closing 970A Soft-Close Adapter for Doors, Dust Gray |
