Pro Value Series 16" 3/4 Extension Self-Close Epoxy Coated Euro Slides PRO 50, Cabinet Member Right Hand Side Mount White - 4000-16-WT-CR

Pro Value Series PRO50 Cabinet Member Use

Pro Value Series PRO50 cabinet member defines this right-hand side mount part as the cabinet member of a 3/4 extension self-close epoxy coated Euro slide, so it carries the fixed side of the drawer system in your cabinet. The 16 inch length sets the drawer travel and fit for cabinets designed around this slide size, which guides layout when matching drawer box depth. The right hand orientation means it is shaped for the right cabinet side, which keeps the slide geometry correct in face-frame and European applications. The self closing action built into this PRO50 member pulls the drawer closed at the end of travel, helping drawers return consistently to the fully closed position. The epoxy coated finish on the cold rolled steel creates a smooth bearing surface for the polymer wheel, which supports quiet, low-friction movement in daily use.

Key Slide Details That Support Cabinet Work

• The PRO50 cabinet member works in both face-frame and European applications, so shops using different cabinet constructions can keep the same slide family across projects, simplifying planning and reordering.
• The 3/4 extension design lets the drawer extend most of its length while the cabinet member remains anchored, which balances access with support for common storage loads in typical cabinet use.
• The positive stop feature limits forward travel at a defined point, which helps protect fronts and reveals by preventing over-travel against adjacent components or doors in the cabinet run.
• The lift out disconnect allows the drawer member to disengage from this cabinet member, which supports removal of drawers for jobsite finishing, service, or adjustment without disturbing cabinet installation.
• The self closing action engages near the end of stroke, which draws the drawer fully closed and helps keep fronts aligned across a bank of drawers in normal operation.
• The quiet polymer wheel runs on the epoxy coated track of this cabinet member, which reduces noise and provides a smooth feel on open and close cycles throughout the life of the cabinet.

Mounting Space And Slide Fit In Cabinets

This PRO50 cabinet member uses a mounting space of 1/2 inch plus 1/32 minus 0 inch clearance on each side, which defines the side-to-side gap you build into the cabinet opening relative to the drawer box for proper slide function. The 1-1/2 inch height of the member establishes how much vertical room the slide occupies on the cabinet side, which helps when coordinating with drawer box side heights and interior clearances. The design is part of a side mount drawer slide system, so the cabinet member sits along the interior cabinet wall instead of under the drawer, which keeps the slide visible for layout and fastener placement. This defined geometry supports predictable fit when repeating the same construction across multiple cabinets in a project.

How This Cabinet Member Performs In Service

Where This Right Cabinet Member Is Used

This PRO50 right hand cabinet member is specified for drawer slides in cabinets that use side mount, epoxy coated Euro slides, so it fits projects built around this slide style. Its ability to work in both face-frame and European applications means it can be installed in traditional framed cabinets and frameless systems, which is useful for shops serving different lines from the same core hardware family. The 16 inch length matches drawer boxes sized for that slide run, which helps standardize depths across kitchen, bath, or utility cabinets built on the same platform. With 32 mm mounting holes on the cabinet member, it aligns with drilling patterns based on the 32 mm system, which speeds layout on case sides that are already processed with that hole spacing. Bottom and side mounting holes on the drawer member side of the system complement this cabinet member, supporting flexible attachment to drawer boxes planned around those hole locations.

Why Construction And Finish Matter For Results

The PRO50 cabinet member is made from 1.2 mm cold rolled steel, which gives the member a rigid track for the drawer system to run on and supports consistent slide action under normal furniture and cabinet loads. The epoxy coated finish on the steel provides a smooth, uniform surface for the polymer wheel, which reduces friction and supports the lifetime of quiet, trouble-free performance described for this wheel and track combination. The white color of the epoxy coating allows this cabinet member to visually blend with light interiors, which helps the hardware recede in painted or white melamine cabinets. The design has been ANSI/BIFMA tested and approved to Grade 1 requirements, which demonstrates that the slide system has passed standardized performance testing relevant to its class. Together with the single captive design, which keeps the drawer member captured in the track, these details work to maintain controlled movement, stable drawer tracking, and repeatable closing behavior over repeated use cycles.

Common Questions About This PRO50 Cabinet Member

Selecting This PRO50 Cabinet Member For Projects

The 4000-16-WT-CR PRO50 right hand cabinet member combines 16 inch length, 3/4 extension travel, and self closing action in a side mount Euro slide format, which suits cabinets planned around this specific geometry. Its 1/2 inch plus 1/32 minus 0 inch side clearance and 1-1/2 inch height give you fixed reference points for sizing drawer boxes and laying out cabinet sides. With 1.2 mm cold rolled steel construction, epoxy coated white finish, and polymer wheel running on the coated track, it supports quiet, predictable drawer movement in face-frame and European applications using this slide family.