Pro Value Series 22" 3/4 Extension Self-Close Epoxy Coated Euro Slides PRO 50, Cabinet Member Left Hand Side Mount White - 4000-22-WT-CL

Pro Value Series PRO50 Cabinet Member Function

Pro Value Series PRO50 cabinet member is a left hand side mount part of a 22 inch 3/4 extension self close epoxy coated euro slide, so it supports controlled drawer travel and closing where a Euro-style slide layout is required. This cabinet member works in face-frame and European applications, so one slide design can be used across different cabinet constructions in the same shop. The part is white epoxy coated, which covers the 1.2 mm cold rolled steel and provides a finished appearance that blends with light casework interiors. A quiet wheel and self closing action work together to pull the drawer shut and reduce slamming at the end of travel. The captive design with positive stop holds the drawer member in its track during operation, which supports consistent alignment over repeated cycles. A lift out disconnect lets the drawer member separate from this cabinet member, which simplifies removal for adjustments or service.

Key Details That Support Cabinet Install Work

• The 22 inch length defines the drawer box depth this cabinet member is designed to support, helping layouts where standard cabinet depths are used.
• The 3/4 extension travel lets the drawer open far enough for access while keeping part of the slide engaged, which supports stable movement under typical loads.
• The self closing action pulls the drawer into the closed position at the end of its travel, which helps drawers sit flush without repeated manual nudging.
• The quiet polymer wheel rolls along the track to reduce noise as the drawer moves, which suits cabinets placed in noise-sensitive environments.
• The 1.2 mm cold rolled steel construction provides a solid metal body for the euro slide, supporting consistent slide geometry over its installed life.
• The ANSI/BIFMA Grade 1 testing shows the slide has been evaluated to that performance level, which supports use where a tested slide standard is preferred.

Side Mount Fit, Clearances, And Mounting Zones

This side mount cabinet member is designed for mounting space of 1/2 inch plus or minus 1/32 inch clearance on each side, which defines the gap between the drawer and cabinet for proper slide function. The cabinet member height of 1-1/2 inch sets the vertical profile of the slide, which matters when planning stacked drawer banks where hardware spacing is tight. The 32 mm mounting holes on the cabinet member line up with a standard 32 mm system pattern, which fits cabinet cases laid out on that drilling system. Bottom and side mounting holes on the drawer member side of the system are referenced in the description, which gives flexibility in how the mating drawer component is fastened relative to the drawer box design.

Using The 4000-22-WT-CL Slide In Real Projects

Where This Left Hand Cabinet Member Fits Best

This PRO 50 left hand cabinet member works in face-frame and European applications, so it fits both framed kitchen cabinetry and frameless casework built on a 32 mm system. The side mount design pairs with drawer members to position the drawer box alongside the cabinet wall, which is common in many residential and light commercial cabinets. The 22 inch length matches cabinets built around standard-depth bases, so it suits many kitchen, bath, and utility layouts that use that depth. The white epoxy coated finish lets this slide sit cleanly against painted or melamine interiors, which helps the hardware recede visually behind the drawer.

The quiet polymer wheel rides along the epoxy coated track as the drawer moves, so it supports low-noise operation in kitchens, baths, or office furniture. The captive single track combined with a positive stop guides the drawer member along a defined path, which matters when consistent alignment is needed across a bank of drawers. The self closing action at the end of travel assists the last portion of drawer closure, which helps drawers settle against their front stops and stay closed under normal use.

Details That Support Alignment And Repeatable Results

The mounting space requirement of 1/2 inch plus or minus 1/32 inch clearance on each side gives a specific target for cabinet and drawer widths, which helps installers produce smooth-running drawers without trial-and-error fitting. The 1-1/2 inch height of the cabinet member defines how much vertical space the slide occupies, so it can be laid out consistently at the same reference from the cabinet bottom or rail. The 32 mm mounting holes on the cabinet member align with standard line boring, which streamlines installation on production cabinets built on that hole pattern.

Bottom and side mounting holes on the drawer member side provide options for attaching the mating drawer hardware, so drawer box designs with different wall thicknesses or materials can be accommodated. The ANSI/BIFMA Grade 1 testing and approval described for this slide means the system has been measured against that grade, which supports projects where documented performance levels are part of the specification. The 1.2 mm cold rolled steel body carries the epoxy coating and wheel track, which contributes to maintaining slide shape under repeated use in cabinetry environments.

Common Questions About This PRO50 Cabinet Member

Choose This PRO50 Member For Matching Projects

This Pro Value Series PRO50 left hand cabinet member combines 22 inch length, 3/4 extension, and self closing action in a side mount epoxy coated euro slide, which aligns with many standard cabinet depths and access needs. The specified 1/2 inch plus or minus 1/32 inch side clearance and 1-1/2 inch height give clear layout dimensions, helping shops and installers work to a repeatable pattern across multiple cabinets. The 32 mm mounting holes on the cabinet member support production casework built on that drilling system, while the white epoxy coated finish matches light interiors. For projects calling for a tested slide meeting ANSI/BIFMA Grade 1 requirements, this 4000-22-WT-CL cabinet member fits that role within the PRO 50 system.