Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the left-hand cabinet member of the Pro Value Series PRO50 epoxy-coated Euro slide — a 20 inch, white, self-closing, 3/4-extension roller slide component that mounts to the cabinet side. It is sold as the cabinet member only; see the matching right-hand cabinet member and both drawer members to complete a single drawer.
The white finish makes this member the natural pick for drawers built into white-painted face-frame cabinets, white melamine frameless boxes, or any interior where a cream or brown slide would read as a visible line against the panel. Kitchen base cabinets, bathroom vanities, and closet towers are the core applications. At 75 lb capacity and 3/4 extension, this is a production-duty slide for standard residential drawer loads — utensils, toiletries, folded clothing — not a candidate for heavy pots-and-pans pulls or file drawers that need full rear access.
The white epoxy powder-coat is baked over steel, giving the member its color-matched finish and protecting the steel through years of indoor cabinet service. The self-closing action is a mechanical ramp: once the drawer is pushed to within the capture zone, the ramp pulls it fully home. This is self-close, not soft-close — the close is positive and undamped. If a slowed, silent landing is needed, that is a different feature requiring a damped slide. The side-mount position puts 1/2 inch of clearance between the drawer box side and the cabinet interior wall, so the drawer box should be built 1 inch narrower than the opening to allow for both sides.
Cabinet shops running white-interior production lines are the primary buyer here — ordering left-hand and right-hand cabinet members in bulk alongside their drawer member counts, rather than purchasing complete sets. The member-level buying model lets a shop carry the exact inventory it needs without surplus. Homeowners doing a single vanity refresh or a DIY closet build also order by member when they need to replace one damaged piece or match into an existing PRO50 installation. In either case, the rule is the same: one drawer requires one left-hand cabinet member, one right-hand cabinet member, and both drawer members from the same PRO50 20 inch series.
No. This listing is the left-hand cabinet member only. To run one drawer you also need the matching right-hand cabinet member and both drawer members, all from the PRO50 20 inch series.
Self-close uses a mechanical ramp to pull the drawer fully shut once it enters the capture zone — positive and quick. Soft-close adds a damper that slows the drawer over the last inch for a quiet, controlled landing. This PRO50 member is self-closing only; there is no damper.
These are 3/4-extension slides, so the rear portion of a 20 inch drawer stays inside the cabinet at full open. If full rear access is needed, look at full-extension slides instead.
No. Cabinet and drawer members must come from the same series. Mix only within the PRO50 20 inch line; members from other series or brands will not seat and track correctly together.
It suits both construction types on the side-mount position. In a face-frame cabinet, the slide's back end will need rear support from a rear socket or mounting bracket; check that you have the appropriate rear hardware before installing.
Order the left-hand cabinet member alongside its right-hand mate and the matching drawer members, and the 20 inch PRO50 white Euro slide goes together without hunting for mismatched parts — keeping the production line moving and the cabinet interior clean.
Sold In: 100 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  DSPRO50RBN-R Mfr# EUSKT-1-R | PRO Value PRO50 500-Pack 3-1/2" Rear Mounting Socket, Right Hand, White, EUSKT-1-R | ||||
Sold in: 1 Each |  DSPRO50RBN-L Mfr# EUSKT-1-L | PRO Value PRO50 500-Pack 3-1/2" Rear Mounting Socket, Left Hand, White, EUSKT-1-L |
