Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Series 20 inch drawer slide describes this right hand cabinet member from the PRO50 epoxy coated euro slide line, so you know it is sized and built for a 20 inch cabinet run with side mounting. The slide is a cabinet member only, which means it provides the cabinet-side track for a matching PRO50 drawer member in a drawer slide system. The 3/4 extension self-close action moves the drawer most of the way out and then pulls it back to closed, which helps drawers return consistently without slamming. Its epoxy coated euro slide design provides a smooth bearing surface along the steel, which supports steady movement under normal cabinet loads. The white color helps this cabinet member blend into light-colored casework, which matters whenever the slide is visible in the opening. ANSI/BIFMA Grade 1 testing on this slide confirms it meets defined performance requirements for typical drawer use.
This PRO50 epoxy coated euro slide cabinet member is built as a side mount drawer slide component, which means it fastens to the cabinet side wall rather than under the drawer. Bottom and side mounting holes on the matching drawer member are part of the overall slide design, so this cabinet member works in systems that use those attachment options. The 1/2 inch plus 1/32 inch or minus 0 mounting space per side sets the required gap between the drawer box and cabinet walls, which is critical when sizing drawer widths in either face-frame or European applications. Its 32 mm mounting holes on the cabinet member align with common system boring patterns, which allows installation into pre-drilled casework without extra layout. The 1-1/2 inch slide height provides a compact profile, which gives room above and below the slide when stacking multiple drawers or working around structural stretchers.
Baer Supply's PRO50 cabinet member only design targets both face-frame and European applications, so it can be applied across different cabinet construction methods using the same slide family. The 20 inch length matches cabinets built for that standard depth, which simplifies specifying slide length during a run of identical units. Mounting space of 1/2 inch plus 1/32 inch or minus 0 on each side guides the finished drawer box width, so the drawer will track properly within the cabinet opening. Its right hand designation identifies this as the component for the right cabinet wall, which matters when installing pairs so the self closing action operates as intended. The white color on the epoxy coated surface coordinates with many painted interiors, which helps the hardware visually recede when drawers are opened in finished installations.
The PRO50 quiet wheel premium epoxy slide uses a polymer wheel on the moving member, which rolls along the epoxy coated track to provide quiet, trouble-free performance during opening and closing. The 3/4 extension movement lets drawers extend most of their length, which balances access with support from the portion staying inside the cabinet. Its self closing action engages near the end of travel, pulling the drawer front back into the cabinet, which helps fronts line up evenly across a bank of drawers. A single captive design holds the moving parts in place on the track, which stabilizes the slide during operation. The positive stop limits travel, preventing the drawer from being pulled past its designed extension, which protects both the slide and the cabinet structure. Lift out disconnect lets the mating drawer member disengage from this cabinet member, supporting removal and reinstallation of drawers for finishing or service work. ANSI/BIFMA Grade 1 approval indicates the slide has been tested to an industry-standard protocol, which gives confidence that the hardware is suited to regular use in typical cabinet environments.
The 4000-20-WT-CR is a PRO50 epoxy coated euro slide cabinet member, so it serves as the cabinet-side track in a side mount drawer slide system.
This PRO50 cabinet member is 20 inches long, which suits cabinet depths designed around a 20 inch side mount euro slide installation.
This euro drawer slide requires 1/2 inch plus 1/32 inch or minus 0 clearance on each side, guiding the target drawer box width inside the cabinet opening.
This cabinet member is described for face-frame and European applications, so it works in both construction styles when paired with the proper drawer member.
The slide uses 1.2 mm cold rolled steel with an epoxy coated white finish, providing a rigid track and a coated surface for polymer wheel travel.
The self closing action on this slide pulls the drawer into the cabinet during the final travel, which helps keep drawer fronts aligned across a run.
This PRO50 cabinet member right hand slide combines 20 inch length, 3/4 extension, and self closing action, which aligns well with everyday kitchen, bath, and casework drawers built around euro slide hardware. Its 1/2 inch plus 1/32 inch or minus 0 mounting space per side and 1-1/2 inch height give clear sizing points for drawer boxes and vertical spacing. The 32 mm mounting hole pattern and epoxy coated 1.2 mm cold rolled steel construction support fast layout and smooth operation in both face-frame and European applications. For projects that call for a white, quiet wheel euro slide track, this right hand cabinet member provides the cabinet-side component to match a PRO50 drawer member layout.
Sold In: 100 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  DSPRO50RBN-R Mfr# EUSKT-1-R | PRO50 Series Rear Mounting Sockets, Right | ||||
Sold in: 1 Each |  DSPRO50RBN-L Mfr# EUSKT-1-L | PRO50 Series Rear Mounting Sockets, Left |
