Pro Value Series 22" 3/4 Extension Self-Close Epoxy Coated Euro Slides PRO 50, Cabinet Member Right Hand Side Mount White - 4000-22-WT-CR

Pro Value Series PRO 50 Cabinet Member Use

Pro Value Series PRO 50 cabinet member defines this 22 inch right hand side mount piece as the cabinet-side component of a self-close epoxy coated euro slide system, so it handles the fixed mounting work inside the case. The 22 inch length sets it up for drawers built around that travel, which helps align drawer depth and slide performance. Its self closing action pulls the drawer into the last portion of travel, which helps drawers sit home consistently in everyday use. The epoxy coated finish on the cold rolled steel creates a smooth running surface, which supports clean motion along the track. White color on the epoxy coated surface blends with light casework where a bright interior is preferred. As a side mount drawer slide component, it sits on the cabinet wall, which keeps layout familiar for installers used to traditional side mount hardware.

Key Slide Details That Support Daily Use

• The 3/4 extension design lets the drawer open most of the way, which gives good access to contents while keeping part of the drawer supported inside the cabinet during use.
• The single captive feature holds the drawer member engaged in the slide channel, which keeps the moving parts tracking together along the same path under load.
• Positive stop functionality limits travel at the end of opening, which prevents the drawer from being pulled past its intended range during repeated use.
• The lift out disconnect lets the drawer member disengage when lifted, which simplifies removing drawers for cabinet work or adjustments in the field.
• Polymer wheel construction delivers a quiet running interface on the track, which reduces noise when drawers cycle in residential or commercial environments.
• ANSI/BIFMA Grade 1 testing and approval document performance to that standard, which supports using this slide in demanding service conditions.

Side Mount Fit, Mounting Space, And Layout

This right hand cabinet member is part of a side mount drawer slide layout, so it references off the side walls of the cabinet. Mounting space of 1/2 inch plus 1/32 inch or minus 0 inch clearance on each side sets a clear target for drawer box width relative to the opening, which helps installers size drawers for consistent slide engagement. Height of 1-1/2 inch defines the vertical footprint on the cabinet side, which matters when stacking drawers or working around face-frame rails. The 32 mm mounting holes on the cabinet member line up with European system drilling patterns, which streamlines installation in euro style casework. Material thickness of 1.2 mm cold rolled steel provides a solid track section, which supports the load path between cabinet and drawer over the full extension.

Real Job Use And Slide Layout Considerations

Where This Right Cabinet Member Fits Best

This 22 inch right hand cabinet member from the Pro Value Series PRO 50 line suits both face-frame and European applications, which lets it bridge common cabinet construction methods in the same project. In face-frame work, the side mount design lets installers tie into runners or blocking along the interior, which keeps the slide aligned with the frame opening. In European frameless cabinets, the 32 mm mounting holes on the cabinet member match system boring, which speeds layout and repeat drilling across cabinet runs. The white epoxy coated color works well in light interiors, which helps hardware recede visually inside white or neutral casework while drawers operate. As a euro slide, this cabinet member supports the mating drawer member along a guided channel, which keeps drawers tracking square under everyday loads.

Why These Mounting Details Improve Results

The mounting space of 1/2 inch plus 1/32 inch or minus 0 inch clearance on each side translates directly into drawer sizing, which reduces trial-and-error when fitting boxes to existing openings. Self closing action pulls the drawer into its final position on closing, which helps fronts line up evenly across a bank of drawers without constant readjustment. The lift out disconnect lets the drawer member separate when lifted out, which allows installers to remove drawers quickly for finishing work or service. Single captive guidance in the channel resists disengagement during movement, which keeps the drawer supported over the 3/4 extension range. Polymer wheel design keeps motion quiet as the slide rolls, which matters where repeated opening could otherwise create noise in kitchens or office cabinetry. Cold rolled steel at 1.2 mm thickness provides a rigid run for the wheels, which helps the system hold alignment over time.

Common Questions About This PRO 50 Cabinet Member

Selecting This PRO 50 Member For Your Job

The Pro Value Series PRO 50 cabinet member right hand side mount white 4000-22-WT-CR brings 22 inch 3/4 extension self close epoxy coated euro slide performance to both face-frame and European applications, so it fits mixed cabinet runs in one project. With defined 1/2 inch plus 1/32 inch or minus 0 inch side clearance, 1-1/2 inch height, and 32 mm mounting holes on the cabinet member, it supports predictable drawer sizing and layout. Pair this cabinet-side component wherever a quiet polymer wheel, epoxy coated, ANSI/BIFMA Grade 1 tested track is needed on the right interior wall.