Pro Value Series 16" 3/4 Extension Self-Close Epoxy Coated Euro Slides PRO 50, Drawer Member Left Hand Side Mount White - 4000-16-WT-DL

PRO50 Drawer Member Left Hand For Smooth Action

PRO50 drawer member left hand is a 16 inch 3/4 extension self-close epoxy coated euro slide component designed for side mounting on the drawer. This drawer member works as part of the PRO50 premium epoxy slide system to support controlled, self-closing drawer travel. The left hand orientation keeps the member aligned with standard euro slide layouts, which helps maintain consistent movement across multiple cabinets. With a white epoxy coated finish on 1.2 mm cold rolled steel, the member provides a smooth running surface that supports the polymer wheel on the matching track. The self-closing action pulls the drawer shut at the end of travel, which helps drawers sit fully closed without manual pushing every time. As a Pro Value Series part, this drawer member supports both face-frame and European applications described for the PRO50 slide, giving installers flexibility across different cabinet constructions.

Functional Details That Support Drawer Performance

• The 16 inch length sets a defined travel distance for the drawer, which helps match cabinet depth when standardizing carcass dimensions on a project.
• The 3/4 extension design allows most of the drawer to open while leaving a guided section engaged, which helps maintain lateral stability under everyday use.
• The self closing action helps pull the drawer fully shut at the end of travel, which reduces partially open drawer fronts across a bank of cabinets.
• The epoxy coated euro slide construction provides a low-friction interface for the polymer wheel, which supports quiet, consistent drawer movement over repeated cycles.
• The left hand drawer member layout aligns with side mount installation on the drawer side, which keeps hardware locations predictable during repeat installs.
• The white color helps the member blend with light cabinet interiors, which supports a clean finished appearance when drawers are open.

Side Mount Drawer Member Layout And Fit

This Pro Value Series drawer member uses a side mount configuration on the drawer, which aligns with the PRO50 epoxy coated euro slide system used in both face-frame and European applications. The member height of 1-1/2 inches sets the vertical space it occupies on the drawer side, which helps plan drawer box dimensions relative to cabinet openings. Mounting space of 1/2 inch plus or minus 1/32 inch clearance on each side defines the lateral gap between drawer and cabinet, helping installers lay out drawer box width accurately. Bottom and side mounting holes on the drawer member give multiple fastening positions along the length, which supports secure attachment in different drawer box designs. The 16 inch length ties in with standard cabinet depths, so the member aligns with typical kitchen and shop drawer layouts.

Using This PRO50 Drawer Member In Cabinets

Where This Side Mount Drawer Member Fits

Baer Supply's PRO50 drawer member only component is designed to work within face-frame and European cabinet applications, so it supports a wide range of shop and jobsite layouts using euro-style slides. As a side mount drawer member white part, it fastens directly to the drawer side, pairing with a matching cabinet member that carries the 32 mm mounting holes on the cabinet side. The specified 1/2 inch plus or minus 1/32 inch clearance on each side defines the working space between drawer and cabinet, helping installers size drawer boxes to move freely without excess play. The 1-1/2 inch height concentrates the hardware in a compact vertical band along the drawer side, which helps keep the slide clear of bottom details such as under-drawer supports or applied trims. With ANSI/BIFMA Grade 1 tested and approved performance, the PRO50 slide system is validated against standardized requirements, which supports its use in demanding cabinet environments where consistent motion is important.

Details That Support Repeatable Drawer Results

The 3/4 extension travel of this PRO50 drawer member keeps a portion of the slide engaged inside the cabinet at full open, which helps control alignment and reduce racking when drawers are loaded during daily use. Self closing action built into the slide mechanism draws the drawer into the final closed position, which helps maintain consistent front alignment across a run of cabinets without repeated adjustments. The polymer wheel is described as providing a lifetime of quiet, trouble-free performance, and this wheel running on the epoxy coated steel surface reduces metal-to-metal friction that can generate noise. The 1.2 mm cold rolled steel construction balances strength with a relatively slim profile, which supports smooth sliding while preserving interior drawer space. Bottom and side mounting holes on the drawer member offer flexible screw placement along the length, which allows installers to anchor the slide solidly into different drawer box materials. The manufacturer part number 4000-16-WT-DL clearly identifies this specific 16 inch, white, left hand drawer member, supporting accurate reordering or matching to existing PRO50 slide installations that use the same size and orientation.

Common Questions About This PRO50 Drawer Member

Selecting This PRO50 Member For Your Project

The Pro Value Series PRO50 16 inch left hand drawer member white part ties into a tested epoxy coated euro slide system, giving installers a defined component when building or servicing side mount drawers. With self closing action, 3/4 extension travel, and a 1-1/2 inch high 1.2 mm cold rolled steel body, it supports smooth motion within the specified 1/2 inch plus or minus 1/32 inch side clearance. For cabinets using PRO50 epoxy coated euro slides in face-frame or European constructions, this 4000-16-WT-DL member provides a clearly identified piece to match existing layouts or standardize new runs.