Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
PRO50 drawer member is a right hand side mount piece of the Pro Value Series 18 inch 3/4 extension self-close epoxy coated Euro slides, so it supports controlled drawer travel on the right side of the drawer. The 18 inch length defines how far the drawer can extend, which sets usable access for cabinet interiors in typical face-frame or European applications. The self closing action pulls the drawer shut at the end of travel, which helps drawers return to a consistent closed position in everyday use. The epoxy coated finish covers the cold rolled steel, which provides a smooth running surface along the slide path while maintaining the strength of metal construction. The white color of the epoxy coating visually matches common white cabinet interiors, helping the hardware blend into many shop-built or production cabinet runs.
The PRO50 drawer system uses a mounting space of 1/2 inch plus 1/32 or minus 0 clearance on each side, so the cabinet opening and drawer box can be sized to this side clearance for proper slide function. The slide height of 1-1/2 inches sets the vertical space the member occupies along the drawer side, which helps with planning stack layouts in multi-drawer cabinets. The drawer member offers bottom and side mounting holes, giving layout options for fastening along the drawer side or bottom edge during assembly. The cabinet member uses 32 mm mounting holes, which matches the common 32 mm system and supports drilling patterns used in European-style cabinet production.
The 18 inch PRO50 drawer member works in face-frame and European applications, so it can be used in kitchen, bath, office, or shop cabinets built on either construction style. The mounting space of 1/2 inch plus 1/32 or minus 0 on each side defines the relationship between the drawer width and the cabinet opening, which is important when cutting drawer parts or programming CNC routines. The 18 inch length suits cabinets where the interior depth matches this slide size, allowing the drawer box to run close to full case depth without overextending the hardware. The white epoxy coated finish coordinates with white cabinet interiors, which can be useful when the slide is visible in open cabinetry or lighter casework interiors. The height of 1-1/2 inches creates a low profile along the drawer side, supporting use in shallow drawers where vertical space is limited.
The self closing action on the PRO50 slide pulls the drawer into its final position, helping drawers stay consistently closed and aligned in everyday operation. The single captive design combined with a positive stop guides the drawer along a fixed track, which helps prevent accidental over-travel and supports predictable movement over time. The lift out disconnect enables the drawer to be removed from the slide track when service, adjustment, or cabinet modification is required, which can simplify on-site work. The polymer wheel on the drawer member provides quiet movement and is designed for lifetime performance, which maintains smooth operation across repeated open and close cycles. The 1.2 mm cold rolled steel construction under the epoxy coating supplies structural strength, so the member can support the drawer within the limits of the PRO50 system. ANSI/BIFMA Grade 1 approval signals that the slide has been tested to industry performance standards, supporting use where a tested slide is required.
The PRO50 drawer member is a side mount 18 inch 3/4 extension self-close epoxy coated Euro slide component, so it serves as the right hand drawer-side piece in the slide system.
The PRO50 self closing action draws the drawer into the closed position at the end of travel, which helps keep fronts aligned and reduces drawers left partially open in regular use.
The PRO50 drawer system uses 1/2 inch plus 1/32 or minus 0 clearance on each side, so drawer and opening widths are planned around that side space for proper slide movement.
The PRO50 epoxy coated Euro slide works in face-frame and European applications, supporting use in traditional framed cabinets and 32 mm system frameless cabinets.
The PRO50 drawer member is part of a slide system tested and approved to ANSI/BIFMA Grade 1 requirements, indicating compliance with recognized performance standards.
The PRO50 drawer member uses 1.2 mm cold rolled steel with a white epoxy coated finish, combining metal strength with a smooth, light-colored running surface.
The PRO50 drawer member right hand side mount part number 4000-18-WT-DR brings 18 inch 3/4 extension self-close performance to face-frame and European cabinets, using a 1/2 inch plus 1/32 or minus 0 side clearance and 1-1/2 inch height. The 1.2 mm cold rolled steel core with white epoxy coating, polymer wheel, and ANSI/BIFMA Grade 1 approval support quiet, smooth movement for long-term drawer service. For projects matching this slide length, mounting space, and Euro style layout, this PRO50 drawer member aligns with trade-focused cabinet construction.
Sold In: 100 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  DSPRO50RBN-R Mfr# EUSKT-1-R | PRO50 Series Rear Mounting Sockets, Right | ||||
Sold in: 1 Each |  DSPRO50RBN-L Mfr# EUSKT-1-L | PRO50 Series Rear Mounting Sockets, Left |
