Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
PRO50 drawer member is a left hand side mount drawer slide component designed for installers who need a specific replacement member for an existing PRO50 epoxy coated Euro slide. The 18 inch length supports typical cabinet drawer depths, so it matches many standard face-frame and European cabinet layouts that already use this series. The slide is part of Baer Supply's PRO50 line, which is built around a quiet wheel epoxy system that keeps drawer motion controlled in day-to-day use. A self closing action pulls the drawer shut at the end of travel, which helps drawers remain closed without constant adjustment. The 3/4 extension design moves the drawer far enough out for access while keeping a section of slide supported inside the cabinet. This part is identified as manufacturer part number 4000-18-WT-DL, helping match it to the correct PRO50 assembly in service work.
This PRO50 drawer member works with a mounting space of 1/2 inch plus or minus 1/32 inch on each side, which defines the side clearance needed between drawer and cabinet for proper slide function. Bottom and side mounting holes on the drawer member give multiple fastening positions along the drawer side or bottom, helping align the slide with existing PRO50 cabinet members. The 1-1/2 inch height keeps the slide compact against the drawer side, which leaves space above and below for drawer construction details. A positive stop built into the design limits travel at the open position, holding the drawer at full 3/4 extension without overrunning the slide. Lift out disconnect lets the drawer be lifted free at a specific travel point, which simplifies removal when working on cabinetry that already uses this PRO50 system.
Baer Supply's PRO50 drawer member only component is intended to work in face-frame and European applications, so it fits common cabinet construction styles that already rely on PRO50 epoxy coated Euro slides. The left hand designation means this member mounts on the left side of the drawer box, aligning with a matching cabinet member on that side in existing installations. Because it is 18 inches long, it matches drawer boxes and cabinet depths that were originally built around that slide length. The 1-1/2 inch height works with typical drawer side heights, allowing the slide to sit low enough to clear drawer contents while still supporting the box. A self closing action at the end of stroke pulls the drawer securely against the cabinet front, which is useful in kitchens, offices, or shop storage where drawers benefit from staying shut after use.
The PRO50 quiet wheel premium epoxy slide construction uses a polymer wheel for lifetime quiet, trouble-free performance, so this drawer member maintains smooth movement even with frequent cycles. Because the system is ANSI/BIFMA tested and approved to Grade 1 requirements, installers can rely on consistent slide behavior across matched parts in the same project. The single captive design holds the drawer member engaged with the cabinet member, guiding the drawer along a controlled path during opening and closing. Positive stop action controls the open position, which helps protect fronts and hardware from overtravel impacts in daily use. Lift out disconnect provides a defined point for removing the drawer, so service work or cabinet adjustments do not require disturbing the cabinet member. The epoxy coated cold rolled steel structure resists wear on the slide surfaces, maintaining the self closing and 3/4 extension action of the PRO50 system over time.
The PRO50 drawer member only part is the left side slide component that mounts to the drawer box and works with a PRO50 cabinet member to guide drawer movement.
The 4000-18-WT-DL drawer member is 18 inches long, suiting drawer and cabinet depths originally designed around that slide length in PRO50 installations.
The drawer member is specified as left hand side mount, so it attaches to the left side of the drawer box in a PRO50 slide assembly.
This drawer member works with 1/2 inch mounting space plus or minus 1/32 inch on each side, guiding the gap between drawer and cabinet for proper slide function.
The self closing action on the PRO50 epoxy coated Euro slide pulls the drawer closed near the end of travel, helping drawers rest fully shut after use.
ANSI/BIFMA Grade 1 approval indicates the PRO50 slide design has been tested to defined performance requirements, supporting use in drawers that see regular operation.
The PRO50 drawer member left hand side mount white 4000-18-WT-DL gives installers a defined replacement part when servicing PRO50 epoxy coated Euro slides in 18 inch length. The combination of 1/2 inch plus or minus 1/32 inch side clearance, 1-1/2 inch height, and bottom and side mounting holes supports straightforward alignment with existing cabinet members in face-frame and European cabinets. For projects using Baer Supply's PRO50 system, choosing this specific left drawer member keeps the original 3/4 extension, self closing action, and quiet polymer wheel performance consistent across all serviced drawers.
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  DSPRO50RBN-R Mfr# EUSKT-1-R | PRO50 Series Rear Mounting Sockets, Right | ||||
Sold in: 1 Each |  DSPRO50RBN-L Mfr# EUSKT-1-L | PRO50 Series Rear Mounting Sockets, Left |
Sold In: 100 Each
