Pro Value Series 22" 3/4 Extension Self-Close Epoxy Coated Euro Slides PRO 50, Drawer Member Left Hand Side Mount White - 4000-22-WT-DL

PRO50 Drawer Member Left Hand For Smooth Use

PRO50 drawer member left hand is a 22 inch 3/4 extension self-close epoxy coated Euro slide component designed as the drawer-side member for side mount drawer slide installations. This PRO Value Series part is the drawer member only, so it partners with the matching cabinet member in the PRO50 system to create a full slide assembly for typical shop and jobsite drawer construction. The quiet wheel premium epoxy slide design supports face-frame and European applications, giving flexibility across common cabinet styles in the woodworking trade. A single captive design controls the drawer track interface, while the positive stop feature manages travel limits to support consistent drawer extension. Lift out disconnect with self closing action allows drawers to be removed and re-engaged at the member interface during build, finishing, or service work, while still providing a closing action at the end of travel in normal use.

Key PRO50 Drawer Member Details For Projects

• The 22 inch length supports installations where drawer depth suits this standard size, aligning with many cabinet carcass dimensions in both shop-built and production work.
• As a 3/4 extension slide, the member allows the drawer to extend most of its length, providing access to stored items while retaining some support within the cabinet for stability.
• The self closing action at the disconnect point brings the drawer fully closed once near the cabinet, which helps maintain a consistent front alignment without additional closing hardware.
• Epoxy coated steel construction provides a coated surface over the 1.2 mm cold rolled steel, which supports smooth wheel travel along the member during repeated opening and closing.
• The white color finish coordinates with white interior cabinet runs, allowing this drawer member to visually blend into many shop-standard cabinet interiors.

Mounting Space And Drawer Member Fit Details

The PRO50 drawer member only part uses a mounting space of 1/2 inch plus 1/32 inch or minus 0 inch clearance on each side, giving a defined side clearance target for drawer box construction when pairing with the cabinet member. A height of 1-1/2 inch keeps the member low profile along the drawer side, which helps in layouts where vertical space is limited or where multiple drawers are stacked within a cabinet. Bottom and side mounting holes on the drawer member provide placement options along the drawer side or bottom edge, which supports varied shop preferences for screw patterns and jig setups during production runs.

Using This Euro Slide Member In Cabinet Work

Where This 22 Inch Drawer Member Fits

This PRO Value Series PRO50 drawer member only is part of a side mount drawer slides system used in face-frame and European applications, so it serves in both framed and frameless cabinet construction. The 22 inch length pairs with drawer boxes built to that depth range, aligning the wheel travel path with standard cabinet depths for kitchen, bath, or shop storage runs. Drawers built to the specified mounting space of 1/2 inch plus 1/32 inch or minus 0 inch clearance each side will align with the cabinet member track, supporting smooth motion along the epoxy coated Euro slide profile. The single captive design keeps the drawer wheel engaged within the member channel, guiding the motion path along the cold rolled steel member during opening and closing cycles. Polymer wheel construction at the drawer interface works with the epoxy coated track to deliver quiet wheel movement as drawers travel, which is useful anywhere reduced operating noise is valued in cabinet installations.

Details That Support Repeatable Install Results

The 3/4 extension format of this drawer member only lets the drawer extend far enough to reach stored contents while leaving part of the drawer supported inside the cabinet, which aids stability under load during everyday use. Lift out disconnect with self closing action means the drawer can be lifted off the members at the disconnect position for finishing or service tasks, then set back on to regain the same travel and closing behavior, streamlining shop and field workflows. The positive stop feature at the forward travel limit defines the maximum opening distance, keeping drawer fronts aligned within the cabinet run and helping to protect adjacent fronts in closely spaced layouts. Bottom and side mounting holes on the drawer member give flexibility to match existing drilling patterns or production jigs, supporting consistent placement from one drawer to the next in a run of cabinets. The 1.2 mm cold rolled steel construction behind the epoxy coated finish provides a solid structure for the member, supporting the wheel and track interface across ANSI/BIFMA Grade 1 tested and approved usage conditions. Polymer wheel material working on the epoxy coated track further supports long-term quiet, trouble-free performance by reducing metal-to-metal contact as the drawer cycles through repeated openings.

Common Questions About This PRO50 Drawer Member

Choose This PRO50 Member For Matched Installs

The PRO50 drawer member left hand in white pairs with the corresponding cabinet member to build a 22 inch 3/4 extension self-close epoxy coated Euro slide assembly for face-frame and European work. With defined mounting space, 1-1/2 inch height, and bottom plus side mounting holes, it supports consistent drawer construction and repeatable placement across cabinet runs. Select this 4000-22-WT-DL drawer member when building or servicing installations that call for PRO Value Series PRO50 epoxy coated Euro side mount drawer slides in a white finish.