Pro Value Series 22" 3/4 Extension Self-Close Epoxy Coated Euro Slides PRO 50, Drawer Member Right Hand Side Mount White - 4000-22-WT-DR

PRO50 Drawer Member For Smooth Self Closing

PRO50 drawer member is a right hand, side mount drawer slide member designed for 3/4 extension self-close operation, so drawers travel most of their length while still returning firmly into the cabinet. This member is 22 inches long, which suits drawer depths built around that slide length in typical cabinet layouts. The part is epoxy coated in white over 1.2 mm cold rolled steel, giving a durable metal structure with a clean, neutral finish that works in many shop or residential applications. Its self closing action pulls the drawer shut at the end of travel, helping drawers stay closed without extra catches. A positive stop feature halts travel at the correct point, which supports consistent reveal and alignment against the cabinet front. The lift out disconnect allows the drawer member to disengage from the cabinet member during work, which helps during installation, fitting, or later service.

Key PRO50 Drawer Member Job Advantages

• The quiet wheel design on this PRO50 drawer member uses a polymer wheel, which delivers a lifetime of quiet, trouble-free performance in use, helping finished cabinets operate smoothly in homes or shops.
• ANSI/BIFMA Grade 1 testing and approval means this drawer member meets recognized performance requirements, giving installers a verified level of durability for demanding cabinet projects.
• The 3/4 extension travel provides substantial drawer access while keeping some slide length inside the cabinet, which supports stability under load and predictable motion for everyday use.
• The white epoxy coated finish over cold rolled steel adds corrosion-resistant protection to the slide member, which supports long-term function in typical interior woodworking environments.
• The PRO50 drawer member is designed to work perfectly in both face-frame and European applications, so a single slide style can be used across different cabinet construction methods in the same job.

Side Mount Drawer Member Fit And Mounting

This PRO50 right hand drawer member is part of a side mount drawer slide system, so it rides along the cabinet sidewall rather than underneath the drawer. The specified mounting space is 1/2 inch plus or minus 1/32 inch clearance on each side, which sets the drawer box width relative to the cabinet opening for correct slide engagement. The member height is 1-1/2 inches, so drawer side profiles can be planned to allow that vertical space for mounting. Bottom and side mounting holes on the drawer member give layout flexibility during installation, letting crews choose a pattern that suits their jigs and drawer construction. The 32 mm mounting holes called out on the cabinet member align with common 32 mm system drilling, which supports efficient line-bored casework when this drawer member is paired with its proper cabinet member.

Using This 22 Inch Self Close Drawer Member

Applications In Face-Frame And European Cabinets

This 22 inch PRO50 drawer member is specified to work perfectly in both face-frame and European cabinet applications, so shops building mixed construction can standardize on the same slide series. The right hand orientation supports traditional left-and-right slide pairing on drawer boxes, keeping motion balanced across the opening. Its 22 inch length suits standard cabinet depths where a nearly full-depth drawer is required, such as base cabinets or storage units. The side mount configuration matches common shop practices for framed and frameless casework, fitting into familiar construction details. Because the system is part of the Pro Value Series epoxy coated euro slides, it fits into projects that use that slide family as a standard hardware choice across multiple cabinet runs.

Details That Support Alignment And Repeatability

The 3/4 extension design of this PRO50 drawer member controls how far the drawer projects from the cabinet, which helps maintain stability and predictable reach for stored items. Its self closing action draws the drawer fully against the cabinet at the end of travel, which supports consistent front alignment and reduces drifting fronts over time. A positive stop feature halts the drawer at a defined point, which helps keep reveals uniform across stacked or side-by-side drawers. The lift out disconnect gives a straightforward way to remove the drawer member from the cabinet member, a useful detail during fitting, adjustment, or refinishing work. The polymer wheel is engineered for quiet, trouble-free performance, which reduces noise and resistance as the drawer cycles. With a mounting space of 1/2 inch plus or minus 1/32 inch per side, the slide establishes clear tolerances for drawer box sizing, helping reduce rework when multiple drawers are produced from the same setup.

Common Questions About PRO50 Drawer Member Use

Selecting This Right Hand PRO50 Drawer Member

This Pro Value Series PRO50 right hand drawer member combines a 22 inch length, 3/4 extension travel, and self closing action to support everyday cabinet drawer performance. The side mount design with defined 1/2 inch plus or minus 1/32 inch clearance per side gives clear sizing targets for drawer construction. Polymer wheel engineering and epoxy coated cold rolled steel support smooth, quiet movement in interior cabinet environments. ANSI/BIFMA Grade 1 approval adds a tested performance level that suits serious shop and jobsite work. For projects built around PRO50 epoxy coated euro slides in face-frame or European cabinets, this 4000-22-WT-DR right side drawer member aligns with that slide family and application range.