Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf drip tray helps protect a sink cabinet from minor leaks before they turn into cabinet damage. This under sink organizer from Rev-A-Shelf Corporation is part of the SBDT Series drip tray line and is designed for sink base cabinet use. The almond drip tray measures 34-1/2 inches wide by 23-1/4 inches long by 3/4 inch high and holds up to 1.75 quarts of water. Buyers comparing mats or basins for sink cabinet protection often want a simple way to contain small drips under plumbing connections, disposers, or supply lines. This cabinet drip tray is intended for that role. Rev-A-Shelf notes that it is recommended for new cabinetry, and installation may be difficult after the sink and countertop are already installed.
Key specs to confirm: This sink base drip tray is a Rev-A-Shelf SBDT Series model in almond with overall dimensions of 34-1/2 inches W x 23-1/4 inches L x 3/4 inches H. The tray holds 1.75 quarts of water and is designed to protect a sink cabinet from minor leaks. Before ordering, confirm your cabinet interior floor area can accept these dimensions and that plumbing locations will not interfere with placement. Rev-A-Shelf states this product is recommended for new cabinetry, so buyers should confirm installation timing if the sink and countertop are already installed. Any code, compliance, or additional technical requirements not listed here should be confirmed with the manufacturer or technical documentation.
What's included: Verified data identifies this product as a single Rev-A-Shelf SBDT-3336-A-1 almond drip tray. Other included items should be confirmed before ordering.
What to verify before ordering: Check cabinet interior width and depth, confirm the cabinet floor is accessible for tray placement, review whether an existing sink or countertop limits installation, and confirm the almond color is the right match for your project.
A sink base cabinet is one of the most common places for small plumbing leaks to go unnoticed. Supply line drips, drain connection seepage, and disposal-related moisture can stain or swell the cabinet floor over time. A sink base drip tray gives installers, cabinet shops, and serious DIY buyers a defined layer of sink cabinet protection under those plumbing components. This Rev-A-Shelf drip tray is designed specifically for that purpose.
For a buyer planning a new kitchen or bath cabinet install, this under sink organizer is most useful when selected early in the project. Rev-A-Shelf recommends it for new cabinetry, which matters because access is usually easier before the sink and countertop are installed. In a new build or remodel, that can simplify placement and reduce the chance of struggling around plumbing and sink bowls later. If you are retrofitting an existing cabinet, the product may still be of interest, but Rev-A-Shelf notes that installation can be difficult after the sink and countertop are installed. That is an important fit and labor consideration to confirm before purchase.
The verified dimensions also help define the use case. At 34-1/2 inches wide and 23-1/4 inches long, this almond drip tray is intended to cover a substantial portion of the sink base floor area. The 3/4 inch height provides a raised perimeter to contain minor leaks, and the 1.75-quart capacity tells buyers this is meant for small water events rather than major plumbing failures. Buyers searching for mats or basins often want a product that stays in place and gives a clear visual cue when water is present. This cabinet drip tray addresses that need with a dedicated formed tray rather than a flat liner.
For trade buyers managing cabinet installs, the practical value is straightforward: use the tray to help protect the cabinet bottom, make minor leaks easier to notice, and add a planned protective component to the sink base area. For homeowners, the same logic applies, but the key buying step is confirming interior cabinet fit and install access before ordering.
When buyers compare cabinet drip tray products, the most useful differences are usually size, water capacity, color, and installation timing. This Rev-A-Shelf SBDT Series drip tray gives verified measurements, a stated 1.75-quart capacity, and an almond color option. Those details make it easier to compare against other generic under sink organizer styles without guessing about footprint or intended use.
Another practical comparison point is product type. Loose mats can help with surface coverage, but a formed sink base drip tray with a 3/4 inch height is built to contain minor leaks within a defined edge. Buyers considering basins or mats should think about whether they need simple shelf-style coverage or a tray that can hold water until the issue is noticed and cleaned up. This product is clearly described as a drip tray for sink cabinet protection, so its purpose is specific and easy to understand.
Brand consistency can also matter for professional installers. Rev-A-Shelf is the verified brand on this product, and the SBDT Series naming helps buyers identify it within a recognizable product family. That can help when matching project documents, repeat ordering, or keeping cabinet accessory specifications organized. The most important trust factor, however, is still fit. Confirm the cabinet interior floor dimensions, the timing of installation, and any obstructions from plumbing or an already installed sink before making the purchase.
The sink base drip tray requires enough interior floor space for 34-1/2 inches wide by 23-1/4 inches long by 3/4 inch high.
The Rev-A-Shelf drip tray is recommended for new cabinetry based on the verified product description.
The SBDT Series drip tray may be difficult to install after the sink and countertop are installed, so access should be confirmed first.
This cabinet drip tray holds 1.75 quarts of water for minor leak containment.
The Rev-A-Shelf sink base drip tray is designed to protect a sink cabinet from minor leaks.
This under sink organizer is the almond version of the Rev-A-Shelf SBDT Series drip tray.
The verified product data identifies the drip tray itself, so any additional included items should be confirmed before ordering.
The sink base drip tray may work if the cabinet floor area is clear, but plumbing obstructions and access should be checked before purchase.
This Rev-A-Shelf item is categorized under undersink pull-out systems, but the verified product type is a drip tray for sink base cabinet protection.
This cabinet drip tray should be installed following manufacturer installation guidance and local building requirements where applicable.
almond drip tray buyers should confirm cabinet floor dimensions, installation access, and included components before purchase. This Rev-A-Shelf sink base drip tray gives a verified 34-1/2 inch by 23-1/4 inch footprint, a 3/4 inch height, and 1.75-quart capacity for minor leak containment. It is intended to help protect a sink cabinet, especially in new cabinetry where installation is easier. Before ordering, verify that plumbing placement and any existing sink or countertop will not interfere with fitting the tray inside the cabinet.
Sold In: 1 Each
