Amerock self-close variable overlay hinge describes this semi-concealed face mount hinge that closes the cabinet door without additional catches, which helps installers set up a smooth, controlled door motion in everyday use. The hinge design is part of Amerock Corporation's semi-concealed hinge product class, so only part of the hardware shows on the face frame while the working elements sit behind the door edge. The face mount style means the hinge mounts directly to the cabinet face frame, which suits face-frame cabinet construction common in many shops. A variable overlay specification allows the door edge to overlap the face frame by different amounts, giving flexibility when aligning doors across a run. The satin nickel finish provides a consistent metallic appearance that coordinates with satin nickel hardware throughout the project.
This hinge uses a screw-on mounting method, so the installer fastens the Amerock Corporation steel hinge directly to the cabinet using screws through the plate. The face mount configuration attaches to the front of the face frame, which gives the installer a clear view of hinge placement during layout and fastening. A width of 2 inches defines the hinge footprint on the frame, influencing how much frame surface is available around the hinge for drilling pilot points. The hinge projection of 3/4 inch determines the stand-off of the door from the frame, which affects alignment when setting gaps between adjacent doors or face-frame stiles. The variable overlay feature lets installers adjust door coverage of the frame by selecting hinge position that delivers the desired overlay amount.
This product is identified as a semi-concealed hinge within the Amerock Corporation line, so it fits applications where part of the hinge is visible on the face frame while the rest hides behind the door. It belongs to the face mount hinge category, meaning it is intended for cabinets that use a face frame construction rather than frameless boxes. The hinge works with variable overlay conditions, allowing the door to overlap the frame by more than one fixed amount, which suits installations where overlay dimensions vary from cabinet to cabinet. With a width of 2 inches, the hinge sits on a modest portion of the face frame, which fits typical cabinet stile widths encountered in woodworking projects. The satin nickel finish supports cabinet applications that call for satin nickel decorative hardware, helping keep all visible metal elements visually aligned on the job.
The self-close function of this Amerock self-close variable overlay hinge is designed to pull the door shut near the closing point, which supports consistent door positioning against the cabinet frame after each use. The variable overlay specification interacts with the screw-on face mount design, giving the installer the ability to choose hinge placement along the frame so the final overlay matches neighboring doors. A projection of 3/4 inch sets how far the door sits from the cabinet side when closed, which affects how doors pass each other at corners and along long runs. The steel construction provides a rigid hinge body, which helps keep door alignment stable once the hinge is fastened. The satin nickel finish contributes to repeatable visual results by presenting a uniform surface that coordinates with other satin nickel hardware on every cabinet in the set.
The Amerock BPR7629G10 is a semi-concealed face mount hinge, so part of the hinge shows on the face frame while the working portions operate behind the cabinet door.
The self-close feature on this hinge helps pull the cabinet door closed near the end of travel, which keeps doors resting against the frame for a consistent closed position.
Variable overlay on this hinge means the door can overlap the face frame by different amounts, allowing flexible door positioning to match surrounding reveals.
The 3/4 inch projection sets the door stand-off from the mounting surface, which influences how the door clears adjacent cabinets or walls when opening and closing.
The 2 inch width defines how much face frame area the hinge covers, guiding where pilot locations fall along the frame during installation.
The satin nickel finish on this hinge provides a consistent metallic look that matches satin nickel pulls and knobs, supporting coordinated cabinet hardware on the project.
The Amerock self-close variable overlay hinge BPR7629G10 offers a semi-concealed, face mount design that works with variable overlays, which suits cabinet projects built around face-frame construction. The steel construction, 2 inch width, and 3/4 inch projection define how the hinge positions and supports the door on the frame. The satin nickel finish aligns with satin nickel cabinet hardware, making this hinge a practical choice when a self-close, variable overlay, face mount hinge is required on a job.
Sold In: 1 Pair