Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
extruded aluminum angles 1-1/2 x 12 describe a metal edge molding from Dave Sanders and Company that is part of the Metal Edge Moldings class, so it serves as a shaped aluminum profile dedicated to edge protection in many applications. This product is identified as Manufacturer Part Number 1569-18M, which ties it directly to the ALU ANGL MLDING,1.5'X1.5'X12FT,MILL FNSH description for straightforward product selection on repeat jobs. The angle is stocked in 12 foot lengths, so a single piece can span long cabinet, counter, or panel edges with minimal joints. As an extruded aluminum angle used for edge protection, it creates a defined corner that shields substrate edges from damage while also giving a consistent metal line for a finished appearance along exposed edges.
This aluminum angle is described as ALU ANGL MLDING,1.5'X1.5'X12FT,MILL FNSH, so each leg is specified at 1.5 inches by outside dimension, which helps when planning coverage on the face and underside or return of a panel or shelf. With all stock angle legs specified as 1/8 inch thick, the installer knows exactly how much material will stand proud from the substrate, which influences flush alignment with adjacent laminates or trim. Because the 12 foot length is a standard stocked size, layout can be organized around full runs along cabinet tops, casework edges, or long boards without reworking dimensions to match shorter material.
This molding is categorized under Edgebanding & Surfacing in the Edge Moldings group, so it is intended to finish and protect exposed edges rather than act as structural framing, which suits cabinet, counter, and similar woodworking projects. The Web Description states it is used for edge protection in many applications, so it can be applied wherever a 1.5 inch leg coverage and aluminum corner profile match the design and protection needs of the installation. Because the dimensions are given as outside dimensions, the 1.5 inch by 1.5 inch sizing describes the footprint that the metal will occupy on the face and return, which helps when coordinating clearances with doors, drawers, or nearby components. The 12 foot stocked length allows runs to follow long stretches of casework or panel edges without frequent transitions, which keeps the edge visually continuous.
The note that all stock angle legs are 1/8 inch thick defines the wall thickness along both legs, which affects how the molding behaves when cut, drilled, or notched around project details. A consistent 1/8 inch thickness means the installer can plan miters and joints with predictable material at the corner, which supports tighter fitting corners on outside or inside angle connections. Since the part is described as an aluminum angle molding with mill finish, the as-extruded surface pairs with the 1/8 inch wall to create a straightforward, workable profile that accepts typical metalworking operations without excessive bulk. The combination of 1.5 inch outside leg dimensions and 1/8 inch thickness provides a balance between coverage and profile size, so the angle shields edges while keeping the cross-section manageable for trimming to length along the 12 foot stock run.
The aluminum angle is described as 1.5'X1.5', and dimensions are outside dimensions, so each leg covers approximately 1-1/2 inches on the two faces at the edge.
The Web Description notes that legs of all stock angles are 1/8 inch thick, giving a consistent wall that influences how the molding cuts, drills, and sits at the edge.
The product is specified as 12 feet long in the ALU ANGL MLDING,1.5'X1.5'X12FT,MILL FNSH description, so each stock piece spans a 12 foot edge run.
The Web Description states it is used for edge protection in many applications, meaning it covers and shields exposed edges where the 1.5 inch legs fit.
The SAP Description notes a mill finish, indicating the aluminum has the as-extruded surface appearance, which provides a straightforward, unfinished metal look along the edge.
Dimensions are listed as outside dimensions, so the 1.5 by 1.5 inch sizing reflects the outer footprint, aiding layout where the metal meets nearby components.
The Manufacturer Part Number 1569-18M from Dave Sanders and Company describes an extruded aluminum angle molding in the Metal Edge Moldings class, so it is oriented toward edge protection tasks. With 1.5 inch outside leg dimensions, 1/8 inch thick legs, and a 12 foot length, this mill finish profile is suited to long, exposed edges where a defined metal corner and consistent coverage are important. For projects matching these dimensions and edge-protection needs, this aluminum angle provides a clearly specified option.
Sold In: 1 Each