extruded aluminum angles 3/4 x 12 describes a 3/4 inch by 3/4 inch extruded aluminum angle in a 12 foot length, so you get a long, continuous piece that runs the full edge of cabinets, panels, or shelving without mid-span joints. The product is identified as a metal edge molding, so it is intended to protect exposed edges from impact in woodworking and similar applications where edges see regular contact. The legs of all stock angles are stated as 1/8 inch thick, giving the angle enough section to brace vulnerable corners while still staying relatively low profile along the edge. Dimensions in the table are described as outside dimensions, which means the stated 3/4 inch size refers to the outer leg lengths and helps you size the angle to the finished panel or substrate edge. The mill finish aluminum surface provides a bare, uniform metal look that pairs well with utilitarian or shop-built work.
This extruded aluminum angle has legs with outside dimensions of 3/4 inch by 3/4 inch, so layout starts by sizing the edge or corner to accept that full outside coverage and aligning the legs to the panel faces. With each leg 1/8 inch thick, cuts at the ends can be made with typical metal-cutting methods while still retaining a crisp, solid corner once fitted to the workpiece. The 12 foot length supports long, continuous runs along counters, tops, or tall panels, which reduces the number of joints that must be aligned and deburred along an edge. Availability in both 6 foot and 12 foot lengths offers options when planning cutting diagrams, so offcuts can be minimized when laying out multiple shorter edges from stock lengths.
This product is categorized as a metal edge molding and described as used for edge protection in many applications, so it fits well along exposed corners of cabinet carcasses, shelving, tops, and similar woodworking projects. The 3/4 inch outside leg dimensions suit edges that call for a defined metal wrap, giving a clear metal border along both faces of the substrate. With all legs 1/8 inch thick, the angle provides a solid corner that stands up to regular contact in shops, storage areas, or workrooms where edges regularly meet materials or equipment. The 12 foot stock length allows coverage of long runs such as work counters or tall vertical panel edges without breaking the visual line, which is helpful on projects where a continuous metal strip is desired. Because the finish is mill aluminum, the molding visually suits straightforward utility installations where a plain, bright metal edge is acceptable or preferred.
The fact that dimensions in the table are all outside dimensions means your layout and cutting reference directly to the 3/4 inch leg sizes, which simplifies matching the molding to finished panel measurements. Using a standard 3/4 inch by 3/4 inch extruded aluminum angle allows repeatable selection on follow-up jobs, because the same outside dimension will give the same edge coverage each time. Legs at 1/8 inch thickness add predictable rigidity, so when you cut and handle the angle it holds a straight line and helps maintain a true corner along the run. Having stock in both 6 foot and 12 foot lengths gives flexibility when repeating a common edge detail across multiple cabinets or fixtures, because you can standardize cut lists around those lengths. The mill finish keeps the surface consistent from piece to piece, supporting uniform appearance across projects where matching the look of multiple metal edges matters.
The aluminum angle has outside dimensions of 3/4 inch by 3/4 inch, so each leg covers three-quarters of an inch along the edge and face, giving defined metal protection on both sides.
The legs of all stock angles are 1/8 inch thick, providing a solid metal corner that resists everyday knocks while remaining workable for cutting and fitting during installation.
This aluminum angle is stocked in 6 foot and 12 foot lengths, so runs on cabinets or panels can be planned to use longer pieces and reduce the number of joints.
The mill finish indicates the aluminum has a plain, unfinished metal surface, which offers a straightforward, bright appearance suitable for functional or shop-built projects.
This extruded aluminum angle is described as used for edge protection in many applications, so it shields exposed edges from chipping and wear in everyday use.
All listed dimensions are outside dimensions, so the 3/4 inch measurements match the full outer coverage of the legs, simplifying layout to existing panel sizes.
The Extruded Aluminum Angles 3/4 inch x 12 foot, mill finish, from Dave Sanders and Company, serve as metal edge moldings for protecting exposed edges in many applications. With 3/4 inch by 3/4 inch outside leg dimensions and 1/8 inch thick legs, each length delivers solid corner protection while staying manageable to cut and handle at the bench. Stocked 6 foot and 12 foot lengths give flexible options when planning long or repeat runs along cabinets, counters, or panels. Use this aluminum angle when a straightforward mill finish metal edge and defined 3/4 inch coverage fit the requirements of your next woodworking or shop project.
Sold In: 1 Each