Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
extruded aluminum angles 1 x 6 describes a 1 inch by 6 foot aluminum angle used for edge protection in many applications, so it gives vulnerable corners a metal guard where panels or edges would otherwise be exposed. The product is in the Metal Edge Moldings class, which means it is shaped specifically to sit on an edge instead of a flat face, helping you finish transitions where two surfaces meet. Both legs of the angle are 1/8 inch thick, so each side has enough metal to resist deformation in normal handling while still being workable in a shop environment. All dimensions are stated as outside dimensions, which lets you size the angle relative to visible finished measurements instead of guessing at internal leg length. The length is 6 feet, so a single piece can run most cabinet, countertop, or panel edges without extra joints.
The aluminum angle is extruded, so each piece follows a consistent right-angle profile that helps edges align predictably along the length. Its 1 inch outside leg dimensions let you plan the angle position on the workpiece so the metal fully covers the corner while leaving enough material for any adjacent surfaces or finishes. With legs 1/8 inch thick, the profile offers enough material to sit firmly along the edge without feeling bulky, and it leaves room for surrounding materials in typical woodworking assemblies. The 6 foot stock length means you can lay out long edges in a single run, reducing layout time around joints and helping you maintain a straight, uninterrupted line along the protected edge.
This aluminum angle is identified as Extruded Aluminum Angles 1 inch x 6 feet, so it suits projects that call for a defined 1 inch leg on both sides of a corner. Its role as a Metal Edge Molding means it is intended to sit directly over an exposed edge, which supports applications like cabinet openings, panel corners, or similar edge transitions in woodworking. Because it is used for edge protection in many applications, it can serve wherever a right-angle corner benefits from a metal guard along both sides. The 6 foot length allows a single piece to span long edges on casework or panels, which can help maintain visual continuity along front edges or vertical corners in a run of components.
With both legs 1/8 inch thick, this angle provides a predictable material cross-section, which supports repeatable cutting, drilling, or trimming steps when you are matching multiple pieces in a job. All dimensions described as outside dimensions mean that when you specify 1 inch on a drawing or cut list, the visible outer legs of the molding match that measurement, simplifying your layout and reducing adjustments during fitting. Being an extruded aluminum profile, the angle maintains the same right-angle geometry along its entire 6 foot length, which helps edges track straight against the workpiece for consistent alignment. The product is classified as Metal Edge Moldings by Wurth Baer Supply, so it integrates naturally into workflows that rely on standardized edge trims, supporting replacement or expansion work where the same profile needs to be used again.
The aluminum angle is 1 inch by 6 feet with both legs 1/8 inch thick, so it covers a right-angle corner with a consistent profile along a 6 foot edge.
The dimensions are given as outside dimensions, so the 1 inch measurement reflects the outer leg size you see when the molding is installed on an edge.
The angle is used for edge protection in many applications, so it shields exposed corners where panels or surfaces meet at a right angle.
With both legs 1/8 inch thick, the angle offers enough metal for protection while remaining workable for cutting and fitting during shop or field fabrication.
This angle is in the Metal Edge Moldings class, placing it among edge-focused profiles designed specifically to cover and protect exposed edges.
Wurth Baer Supply offers this aluminum angle under manufacturer part number 749M-6, so it aligns with their metal edge molding product lineup.
This 1 inch by 6 foot extruded aluminum angle from Dave Sanders and Company provides a right-angle Metal Edge Molding with both legs 1/8 inch thick, so it supports edge protection in many applications. Its outside dimensions and 6 foot length simplify layout when you need a consistent metal profile along visible corners. For projects that call for a repeatable aluminum edge guard within the Wurth Baer Supply Metal Edge Moldings family, this 749M-6 angle offers a defined size and thickness you can plan around from the start.
Sold In: 1 Each