Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
extruded aluminum angles 1/2 x 12 describes a metal edge molding from Dave Sanders and Company that is used for edge protection in many applications. The 1/2 inch by 12 foot format gives a long, straight length that covers exposed edges on panels, counters, or fabricated parts. As part of the Metal Edge Moldings category, this angle helps shield vulnerable corners from impact during regular use. The mill finish aluminum surface installs ready for jobs where a clean, unfinished metal look is acceptable or where finishing will be done later in the workflow. Because all dimensions in the table are outside dimensions, sizing work can focus on matching this outer profile to the edge being protected, which supports cleaner lines at the finished corner.
The extruded aluminum angle molding uses legs that are 1/8 inch thick, which affects how it cuts, drills, and seats along an edge. This thickness supports straight cuts with common metal-cutting equipment while holding its profile during handling. Because all dimensions in the table are outside dimensions, installers can size the mating substrate by matching it to the stated 1/2 inch by 1/2 inch outer profile, which simplifies set-up at a saw or shear. The 12 foot stock length reduces the number of joints on longer edges, which can reduce alignment time where continuous metal is preferred. Having 6 foot options in the same series helps finish shorter edges without excessive offcut waste.
This extruded aluminum angle from the Metal Edge Moldings class is used for edge protection in many applications, so it fits naturally on exposed corners of wood, composite, or similar substrates. The 1/2 inch outside dimensions described in the table guide where it can cap or frame a workpiece edge, allowing it to serve as a protective and defining boundary. Mill finish aluminum suits projects where the raw metal look is desired or where the angle will be integrated into a broader surfacing plan. Because legs of all stock angles are 1/8 inch thick, the profile provides a noticeable metal edge that stands up to regular contact in shops, commercial spaces, or built-ins.
The 1/2 inch by 12 foot extruded aluminum angles give a repeatable size that simplifies layout across multiple pieces, which is important when panels must align visually along a run. With all dimensions in the table defined as outside dimensions, cut lists can rely on these numbers to position miters and butt joints without guessing wall thickness. The 1/8 inch thick legs balance strength with workable material, so cuts stay clean while the profile resists distortion when being handled from racks to the job. Stocked 6 foot and 12 foot lengths support planning for continuous or sectional runs, reducing splices on long edges and using shorter pieces where space is limited. Sold in both broken and full box quantities with a discount on full box orders, this line supports both small custom builds and repeated installations using the same profile.
The extruded aluminum angle is listed as 1/2 inch x 12 feet in outside dimensions, so it covers a half-inch edge over a 12 foot run for continuous protection.
The aluminum edge molding has legs that are 1/8 inch thick, which provides a consistent wall that can take normal contact while remaining workable during cutting.
The mill finish on this aluminum angle refers to the as-extruded metal surface, which suits projects using a raw aluminum look or later finishing steps.
Dimensions for this metal edge molding are given as outside dimensions, helping layout because measurements match the finished outer profile used on the workpiece.
This aluminum angle is stocked in 6 foot and 12 foot lengths, so different run sizes can be matched with fewer joints along edges.
This aluminum angle is sold in both broken and full box quantities, with a discount available for full box orders to support repeated or larger projects.
The ALU ANGL MOLDING,.5"X.5"X12FT,MILL FNISH profile from Dave Sanders and Company delivers 1/2 inch outside dimensions in 12 foot mill finish aluminum. Legs that are 1/8 inch thick give a stable edge, and the Metal Edge Moldings class positions it well for edge protection in many applications. With stock offered in 6 foot and 12 foot lengths and sold in both broken and full box quantities, it aligns with small custom builds or ongoing production that repeat the same profile. For jobs that call for aluminum edge protection with clear outside dimensions, this extruded angle provides a straightforward option.
Sold In: 1 Each