extruded aluminum angles 1/2 x 6 from Dave Sanders and Company are metal edge moldings used for edge protection in many applications, so they give vulnerable corners a defined, durable boundary. This 6 foot aluminum angle follows the 6 X 1/2 ANGLE, ALUMINUM specification, which provides a consistent 1/2 inch outside dimension at the leg, helping you plan cuts and layouts around a known profile. The legs of this stock angle are 1/8 inch thick, creating a solid aluminum corner that resists deformation during normal handling and typical woodworking use. Because all dimensions are outside dimensions, the angle covers the full stated size of an edge or corner, letting you size substrates and materials so the metal sits cleanly over the workpiece. As a metal edge molding within the Edgebanding & Surfacing category, it serves as a straightforward way to cap and protect exposed edges.
This 6 foot aluminum angle with 1/2 inch outside dimension legs is suited to straightforward installation along edges and corners, because the regular profile simplifies marking and cutting. The 1/8 inch thick extruded aluminum legs provide enough material for typical fastening and trimming operations while maintaining a clean edge line. Since the dimensions are outside dimensions, the angle can be aligned directly to the finished size of a panel or substrate edge, helping installers position it accurately without compensating for hidden offsets. As a metal edge molding for edge protection in many applications, it integrates into standard edgebanding and surfacing workflows where a defined aluminum corner is desired.
This extruded aluminum angle from Dave Sanders and Company functions within the Edgebanding & Surfacing category, so it fits naturally wherever a project calls for visible, protective metal edge moldings. The 6 foot length allows it to span long cabinet, counter, or panel edges without frequent seams, which can simplify layout along runs that match or are shorter than 6 feet. With a 1/2 inch outside dimension, the profile suits edges designed around that size, giving a defined aluminum border that reads consistently across multiple pieces. The 1/8 inch leg thickness offers a substantial metal presence at the corner, which can be helpful where edges encounter regular contact in woodworking or similar interior environments.
The 6 X 1/2 ANGLE, ALUMINUM designation and manufacturer part 269-18M-6 create a clear reference for repeat ordering, so shops can maintain the same profile on follow-up projects or repairs. Because all dimensions are outside dimensions, the installer can size substrates to the stated 1/2 inch coverage, helping reduce trial cuts and improving alignment when matching multiple panels. The uniform 1/8 inch leg thickness across all stock angles supports predictable cutting and fitting, since saw and miter setups can be dialed in around a known wall thickness. Being identified as used for edge protection in many applications, this aluminum angle can be carried as a standard trim profile in the shop, giving fabricators a consistent solution whenever a metal corner or edge protection detail is part of the design.
This aluminum angle is described as 6 X 1/2 ANGLE, ALUMINUM with all dimensions given as outside dimensions, so it provides a 1/2 inch leg profile along a 6 foot length.
The legs of this stock aluminum angle are 1/8 inch thick, giving a solid wall of metal that supports typical cutting, fastening, and handling in woodworking-related projects.
This metal edge molding is used for edge protection in many applications, so it is intended to guard and finish exposed edges and corners on panels, fixtures, or cabinetry.
All stated dimensions are outside dimensions, so the 1/2 inch reference reflects actual external coverage, which helps align the angle to finished panel or substrate sizes.
This aluminum angle is stocked in 6 foot lengths, allowing long, continuous edge runs on projects that are planned around that 6 foot span.
The product is classified as a Metal Edge Molding in the Edgebanding & Surfacing category, placing it among trim options used to finish and protect exposed edges.
This 6 foot 6 X 1/2 ANGLE, ALUMINUM profile from Dave Sanders and Company pairs a 1/2 inch outside dimension with 1/8 inch thick legs, giving a consistent aluminum edge that suits many protection-focused applications. As a metal edge molding within the Edgebanding & Surfacing category, it supports projects that call for a visible, durable aluminum border along corners and exposed edges. For work that benefits from repeatable dimensions and a clear part reference, the 269-18M-6 aluminum angle offers a defined trim profile that can be specified again whenever the same edge treatment is required.
Sold In: 1 Each