extruded aluminum angles 3/4 x 6 from Dave Sanders and Company provide a metal edge molding solution that is used for edge protection in many applications, so a single profile can serve across different woodworking or fabrication jobs. As a metal edge molding in the Wurth Baer Supply assortment, this angle covers and shields vulnerable edges, which helps reduce damage where panels or surfaces see regular contact. The angle is stocked in a 6 foot length, giving continuous coverage along long edges and reducing the number of cuts needed for common cabinet or fixture dimensions. With dimensions given as outside dimensions, the stated 3/4 inch size refers to the outer legs, which helps with planning clearances around finished edges. The aluminum material provides a rigid, clean-edged profile, so it finishes off surfaces with a straight, defined corner line.
The extruded aluminum angle profile provides straight legs and a consistent 90-degree corner, so it sits cleanly over panel edges that are square and true. Because all legs are 1/8 inch thick, cuts stay stable as ends are trimmed to length with suitable tools, which helps maintain a crisp corner during installation. The 6 foot length offers flexibility in cutting multiple shorter pieces from a single stick for smaller components, while still allowing full-length runs along tall pantry cabinets or long countertops when the layout calls for it. With outside dimensions defining the 3/4 inch legs, installers can size the underlying substrate so the angle lands flush or with the desired reveal along both faces.
This 3/4 inch extruded aluminum angle fits projects where a defined metal edge is part of the design or needed for protection, such as exposed shelving, cabinet bottoms, or table edges. Being part of the Metal Edge Moldings class, it complements edgebanding and surfacing materials when a tougher corner is required along high-contact edges. The outside 3/4 inch legs give a proportional look on common 3/4 inch panel stock, aligning with typical cabinet and casework material thicknesses. Because it is stocked in a 6 foot length, the profile works well on full-height components or long horizontal runs without frequent joints. Aluminum construction also keeps the angle light for handling along large workpieces while maintaining a straight form during dry fit and final installation.
The 1/8 inch thick legs on all stock angles offer a balance between rigidity and workability, which helps cuts stay square and reduces flex as pieces are handled during layout. This consistent thickness across the profile means miters and corner joints can be cut with predictable results when matching edges on adjacent parts. The 6 foot overall length gives enough material to cut multiple matching pieces from a single stick, supporting uniform appearance on doors, drawer fronts, or repeated shelving units. With all dimensions defined as outside dimensions, installers can repeatedly position the angle relative to panel corners knowing that the measured 3/4 inch legs will present the same face coverage every time. The defined 90-degree corner formed by the extruded angle supports sharp transitions between surfaces, which is important when aligning with other straight trims or edging materials on the project.
The aluminum angle has 3/4 inch legs measured as outside dimensions and is stocked in a 6 foot length, which suits long edges and yields multiple shorter pieces from one stick.
The 449M-6 aluminum angle has legs that are 1/8 inch thick, providing enough material for edge protection while remaining workable for cutting and fitting during installation.
This aluminum edge molding is used for edge protection in many applications, so it suits cabinet, panel, and surface edges where a metal corner helps resist wear in regular use.
The dimensions are specified as outside dimensions, so the 3/4 inch legs describe the external coverage, helping layout when matching the angle to panel thicknesses and reveals.
As a metal edge molding in the Edgebanding & Surfacing category, this part bridges decorative surfacing and structural trim, finishing and protecting exposed edges in one profile.
This 3/4 inch aluminum angle is produced by Dave Sanders and Company with manufacturer part number 449M-6, providing a defined reference for repeat ordering on future projects.
This extruded aluminum angles 3/4 x 6 profile from Dave Sanders and Company offers a defined 3/4 inch outside leg size, 1/8 inch leg thickness, and a 6 foot length, so it fits edge protection roles across many cabinet and panel applications. As a metal edge molding within Wurth Baer Supply offerings, it integrates with edgebanding and surfacing work where a metal corner is preferred. For projects that call for a straight, aluminum edge detail with known outside dimensions, this 449M-6 angle gives a consistent reference for repeating the same look across multiple jobs.
Sold In: 1 Each