Extension Hangers UH Series gives you a space-saving, undermount design that helps use narrow spaces efficiently in closet layouts. This UH-300 model is designed as a closet extension hanger so hanging space can be added below shelving where clearance is tight. The chrome / black finish supports a clean, modern look that coordinates with contemporary closet hardware. The 11-13/16 inch long format gives a defined hanging zone, which helps control where garments or items will sit under a shelf run. As part of the UH Series from Sugatsune America, this hanger aligns with closet organization projects that call for compact hardware. The UH-300 identity and closet extension hanger classification make this part straightforward to specify on project drawings and material lists.
The space-saving, undermount design of the UH-300 works beneath a supporting panel or shelf, so the hanger uses the underside area rather than the face of closet sides. This undermount approach helps keep narrow spaces clear at the vertical faces while still adding hanging function. The 11-13/16 inch long dimension helps installers position the UH-300 consistently under shelves, because the same projection can be repeated across multiple units. The use of 1 inch (M4 x 25) long screws as referenced for this UH-300 model sets a defined fastening length, which matters when working with panels of known thickness so the installer can match the hanger location to the available material depth.
The UH-300 closet extension hanger is described as space-saving and undermount, so it works under closet shelves or similar horizontal panels where overhead room is limited. By placing the hanger below the mounting surface, the hardware occupies vertical space that is often unused in narrow sections of a closet. The 11-13/16 inch long measurement defines how far this undermount hanger can extend from its mounting position, which helps plan clearances relative to doors or adjacent panels. Installers can lay out several UH-300 units along a run, using the consistent length to keep rods aligned in depth. The chrome / black finish supports projects where exposed hardware is part of the visible design and needs to coordinate with other closet components in similar tones.
The UH-300 uses a stainless steel hanger rod, giving a defined rod diameter and hard metallic surface that remain consistent from unit to unit, which supports repeatable loading behavior in closet sections using multiple hangers. The steel rod retainer keeps this stainless steel rod seated within the hanger assembly, helping each unit react similarly when garments or items are placed across the span. The plastic end cap closes off the rod end, creating a finished termination at the access side of the hanger so every UH-300 presents the same edge detail. The specified 1 inch (M4 x 25) long screws provide a clear screw length reference for fastening the hanger, which supports uniform installation depth along a shelf line.
The UH-300 Extension Hanger is a closet extension hanger with a space-saving, undermount design, so it adds hanging storage beneath shelves or panels in narrow closet spaces.
The Sugatsune UH-300 hanger is 11-13/16 inches long, which defines how far it projects from its mounting location when planning spacing, alignment, and clearances in a closet run.
The UH-300 closet extension hanger has a chrome / black finish, which helps it coordinate visually with other chrome-toned closet hardware and trim components.
The UH-300 hanger assembly uses a stainless steel hanger rod, a steel rod retainer, and a plastic end cap, giving a combination of metallic strength with a finished plastic rod termination.
The UH-300 uses 1 inch (M4 x 25) long screws, providing a defined screw length reference when fastening the undermount hanger to closet shelves or similar panels.
The UH-300 Extension Hanger is part of the Extension Hangers UH Series from Sugatsune America, aligning it with the brand's closet extension hanger hardware line.
The Extension Hangers UH Series UH-300 from Sugatsune America combines a space-saving, undermount design with an 11-13/16 inch long stainless steel hanger rod for organized closet layouts. The chrome / black finish, steel rod retainer, and plastic end cap help the hanger function cleanly in visible storage areas. With defined use as a closet extension hanger and fastening by 1 inch (M4 x 25) long screws, the UH-300 suits projects where narrow spaces still need dependable hanging capacity.