Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sugatsune UH-350 extension hanger uses a space-saving, undermount design for narrow spaces, so closet hanging capacity can be added where side-mount hardware will not fit. As a closet extension hanger in the UH Series from Sugatsune America, it is suited for closet, shelf, and garage organization layouts that need compact hardware positioned under a shelf. The hanger is 13-3/4 inches long, so the usable reach is defined for planning rod spacing and clearances. A chrome and black finish on visible components supports consistent appearance in modern closet interiors where mixed hardware can stand out. The hanger rod is stainless steel, providing a metal contact surface designed for repeated use. The rod retainer is steel, so the load is supported by a metal connection instead of a plastic retainer. A plastic end cap finishes the rod end, which protects edges the rod may contact.
The UH-350 extension hanger uses an undermount layout, so the body fastens to the underside of a shelf or cabinet surface instead of the side, which matters when side clearances are limited in narrow closet bays. The web description specifies 1 inch (M4 x 25) long screws, so the fastening pattern is based on metric M4 threads and a fixed screw length, helping installers select a material thickness that accepts a 25 mm penetration. The undermount design works with closet, shelf, and garage organization applications where an overhead mounting surface is available, simplifying hardware planning across different storage runs. Being part of a closet extension hanger product class means this unit is intended to extend hanging space outward from a mounting surface, which guides its placement relative to existing rods and vertical panels.
The UH-350 extension hanger is identified as UH EXTENSION HANGER 13-3/4' LONG CHR, which ties its 13-3/4 inch length and chrome finish directly to layout decisions in closet and storage runs. As a closet extension hanger in the Shelf, Closet & Garage Organization category, it is suited for use under fixed shelves where vertical clearance allows garments to hang freely. The undermount design for narrow spaces means the hanger body mounts beneath the shelf, which is useful in installations where gables or walls crowd the sides and limit traditional rod placement. The stainless steel hanger rod with chrome and black component finishes coordinates with other metal storage hardware, supporting use in closet, pantry, or garage settings where a consistent appearance is preferred. Because the rod retainer is steel and the end cap is plastic, the hanger combines a metal load path with a softened rod end, making it practical for everyday garment storage zones that see frequent use.
The manufacturer part number UH-350 identifies this specific Sugatsune America extension hanger, which is valuable when repeating a layout across multiple closet openings or returning to a project for later expansion. The 13-3/4 inch long extension length is fixed, so installers can standardize clearances between fronts of doors, face frames, and hanging garments for a uniform look across several bays. The space-saving, undermount design allows the UH-350 to tuck under shelving, which can reduce layout conflicts with side-mounted organizers and helps keep a consistent hardware line under each shelf. Using stainless steel for the hanger rod means the working surface remains metal-based, supporting smooth hanger travel and helping maintain function in typical residential closet or garage environments. The steel rod retainer keeps the stainless rod positively held, which supports alignment from one unit to another when several are mounted in a row. The plastic end cap defines the finished length of the rod visually, aiding installers in using the rod tip as a repeatable reference when aligning multiple UH-350 hangers along a run.
The Sugatsune UH-350 extension hanger is a closet extension hanger in the UH Series, used to extend hanging space from an undermount position in closet, shelf, and garage organization layouts.
The UH-350 closet extension hanger is 13-3/4 inches long, which defines its reach from the mounting surface and helps plan clearances to doors, panels, and adjacent storage components.
The UH-350 uses a space-saving, undermount design, fastening to the underside of a shelf or similar surface so it can provide hanging space in narrow installations.
The UH-350 extension hanger uses 1 inch (M4 x 25) long screws, so the mounting pattern is based on metric M4 threads with a 25 mm screw length.
The UH-350 uses a stainless steel hanger rod held by a steel rod retainer with a plastic end cap, combining a metal load path with a non-metal tip on the rod end.
The UH-350 extension hanger has a chrome and black finish, allowing it to coordinate with common chrome-based closet rods and darker closet hardware elements.
The UH-350 extension hanger from Sugatsune America combines a 13-3/4 inch long arm with a space-saving, undermount design for narrow spaces, making it suited to closets where side clearance is tight. Its stainless steel hanger rod with steel retainer and chrome and black finish provides a metal-based hanging surface with a coordinated appearance in shelf, closet, and garage organization projects. For layouts that rely on an overhead shelf and need defined extension length, this UH-350 closet extension hanger offers a consistent undermount hanging point tied to a specific part number.