UH-400 extension hanger from the Sugatsune America UH Series is a closet extension hanger designed to add hanging capacity in narrow spaces, so closet layouts can use short wall runs and tight openings more effectively. Its space-saving, undermount design positions the hanger beneath a supporting surface, which keeps the hardware out of the main hanging zone and preserves clear access to clothing. The 15-3/4 inch long format creates a defined hanging section, helping installers align this hanger with adjacent rods or shelves. Chrome and black finish ties visually into typical closet hardware palettes, which helps built-ins and closet systems maintain a consistent appearance. The hanger rod is stainless steel, providing a rigid hanging surface that supports regular use without deforming in service. A steel rod retainer holds the stainless rod in place, keeping the hanging line stable over time. A plastic end cap finishes the rod end, which creates a clean edge at the front of the hanger.
The UH-400 extension hanger is an undermount design, so it fastens to the underside of a structural shelf or panel to create a pull-out hanging section directly below. It uses 1 inch (M4 x 25) long screws, giving installers a defined fastener length for pairing with suitable material thicknesses. Because the hanger length is 15-3/4 inches, layouts can be sized so the hanger clears adjacent walls and doors when extended. The space-saving, undermount format lets the hanger operate in narrow spaces, as the support hardware stays close to the mounting surface and does not occupy additional side clearance. With chrome and black finish, the hanger sits discreetly under shelves while still matching visible hardware in many closet interiors.
The UH-400 extension hanger is part of the Sugatsune America UH Series of closet extension hangers, so it is intended for closet and similar organization applications. As a space-saving, undermount design for narrow spaces, it fits situations where standard fixed rods cannot be added without crowding walkways or door swings. The 15-3/4 inch long format suits short cabinet-style compartments, shallow reach-in sections, or narrow end bays in larger closet systems. Chrome and black finish lets the UH-400 coordinate with common closet colors and metal trims, helping the hanger tie into both wood-based and melamine-based jobs. The stainless steel hanger rod provides a straight hanging surface for garments or hangers, while the steel rod retainer and plastic end cap keep the assembly visually contained at the front edge.
The UH-400 extension hanger uses 1 inch (M4 x 25) long screws, giving installers a known fastener specification that supports consistent mounting choices across multiple openings. Its space-saving, undermount design means the mounting plane is always the underside of a shelf or panel, simplifying layout steps when repeating the installation in a run of closet sections. The defined 15-3/4 inch length provides a predictable projection, which helps set clearances from side walls, doors, or adjacent hardware so hangers can slide without rubbing. With a stainless steel hanger rod held by a steel rod retainer, the structural parts of the UH-400 remain aligned, which supports repeated pull-out use in daily closet operation. The chrome and black finish delivers a consistent look from unit to unit, assisting installers who are matching multiple hangers within the same project scope.
The UH-400 extension hanger is a Sugatsune America UH Series closet extension hanger, so it functions as a pull-out hanging element in closet and organization installations.
The Sugatsune UH-400 extension hanger is 15-3/4 inches long, which defines the available hanging length and helps plan clearances to walls, doors, and nearby closet parts.
The UH-400 extension hanger uses a space-saving, undermount design, so it mounts to the underside of a supporting shelf or panel in narrow spaces.
The UH-400 extension hanger uses 1 inch (M4 x 25) long screws, which sets the fastener length when pairing the hanger with appropriate mounting material.
The UH-400 extension hanger uses a stainless steel hanger rod, a steel rod retainer, and a plastic end cap, creating a rigid hanging surface with a finished front edge.
The UH-400 extension hanger has a chrome and black finish, helping it coordinate with typical closet hardware and interior color schemes.
The UH-400 extension hanger from Sugatsune America combines a 15-3/4 inch long hanger section with a space-saving, undermount design, so narrow closet areas can carry usable hanging space. Stainless steel hanger rod, steel rod retainer, and plastic end cap provide a defined, finished hanging line. Chrome and black finish supports visual continuity across closet hardware. At Wurth Baer Supply, the UH-400 extension hanger is sold in both broken and full box quantities, with discount available on full box orders for larger closet or organization projects.