Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
UH Series extension hanger describes a closet extension hanger from Sugatsune America that is designed to mount under a surface and project hanging space into tight, narrow areas. The 721mm length gives a defined reach for hanging garments where floor space is limited, which helps organize clothing in constrained closet layouts. The space-saving undermount design positions the hardware beneath a shelf or similar structure, keeping the top surface free for storage while providing a forward-extending hanging point. The chrome / black finish presents a neutral, professional appearance that fits into a wide range of closet interiors, so it works in both residential and shop-built installations. The product falls under the closet extension hangers class, so it is purpose-built for extending usable hanging space rather than general shelving, which supports more efficient use of vertical storage in wardrobe and closet projects.
The space-saving undermount design on this closet extension hanger positions the UH-450 beneath a structural surface, which lets installers secure it to cabinet or closet framing while preserving upper storage depth. The product uses 1 inch (M4 x 25) long screws as stated in the web description, which provide a defined fastener size for planning pilot holes and selecting compatible substrates. By using the specified M4 x 25 screws, the hanger can be anchored through mounting flanges into suitable material thicknesses, which supports stable extension and retraction under hanging load. The undermount orientation also keeps visible hardware to a minimum from the front of the closet, which can help projects achieve a cleaner, built-in look while still delivering functional hanging reach.
The UH-450 from Sugatsune America is identified as a closet extension hanger in the Shelf, Closet & Garage Organization category, which positions it for use in wardrobe, reach-in, and similar storage installations. Its 721mm overall length, noted in the product name, provides a substantial extension for garments, which can help bring hanging items forward in deep or narrow cabinets. The chrome / black finish aligns with many closet systems that mix metal and laminate components, which supports consistent visual lines across rods, pulls, and other hardware. With an undermount configuration, the hanger can be positioned under fixed shelving or structural rails, which lets designers stack multiple storage levels while still adding forward-extending hanging capacity. The stainless steel hanger rod, combined with a steel rod retainer and plastic end cap, creates a dedicated sliding or hanging surface, which suits projects that need controlled garment positioning without adding full-width closet rods.
The defined 721mm length of this UH Series extension hanger standardizes projection distance from one unit to the next, which simplifies layout when multiple UH-450 hangers are used in a run. The space-saving undermount design keeps all primary fasten points on the top side of the hardware, which allows installers to work from inside the cabinet structure for a controlled, repeatable fastening pattern. The stated use of 1 inch (M4 x 25) long screws gives a clear fastener standard, which reduces uncertainty in predrilling and helps maintain consistent bite into the supporting material. The stainless steel hanger rod works with the steel rod retainer noted in the web description to hold alignment, which reduces play along the extension so clothes hang in a predictable path. The plastic end cap on the rod creates a defined stop at the front end, which provides a consistent visual endpoint that can be lined up across multiple units for a uniform finished look in closet or wardrobe projects.
The 721mm UH Series extension hanger has a length identified as 17-3/4 inches, which sets the extension reach for planning closet layouts and clearances in front of shelving.
The space-saving undermount design positions the hanger beneath a shelf or support, which preserves shelf surface area while projecting hanging space into tight or narrow closet areas.
The hanger rod is stainless steel, the rod retainer is steel, and the end cap is plastic, which together provide a defined hanging surface with a finished front end.
The UH Series extension hanger uses 1 inch (M4 x 25) long screws, which set the fastener length and thread standard for anchoring into suitable closet or cabinet structures.
The UH-450 has a chrome / black finish, which coordinates with many closet hardware and organization systems that use mixed metal and dark trim.
This product is classified as a closet extension hanger in the Shelf, Closet & Garage Organization category, which defines it as hardware for extending hanging storage.
The 721mm UH Series extension hanger, Chrome / Black from Sugatsune America offers a space-saving undermount design with a stainless steel hanger rod, which suits closet layouts that need forward-extending hanging capacity in restricted spaces. With a defined 17-3/4 inch length and specified 1 inch (M4 x 25) screws, the UH-450 gives installers clear reference points for layout and fastening into closet or cabinet structures. For projects that call for a chrome / black undermount closet extension hanger in the UH Series, this UH-450 model from Wurth Baer Supply aligns closely to that requirement.